laserworld

Laserworld CS-1000RGB MK4 - RGB Diode Laser Projector The Laserworld CS-1000RGB MK4 is a compact and versatile RGB diode laser projector designed for small to semi-professional applications. Its lightweight and robust housing, combined with flexible mounting options, make it ideal for mobile DJs, clubs, bars, and private use. With its analog modulation and diverse control options, the CS-1000RGB MK4 allows for the creation of dynamic and colorful laser shows.    Key Features Compact and Lightweight Design:Newly designed housing with a stable bracket for versatile mounting.   Suitable for hanging or standing installations.   Pure Diode RGB Laser System:Analog modulated multi-color RGB laser system.   Total output power up to 800 mW (guaranteed).   200 mW 650 nm red diode.   70 mW 520 nm green diode.   530 mW 450 nm royal-blue diode.   Brilliant colors and powerful laser beams.   Good Beam Specifications:Approximately 4 mm beam diameter.   1.1 mrad beam divergence.   28 kpps @ 8° ILDA scanning speed.   Versatile Control Options:DMX control.Automatic mode with pre-programmed patterns.   Sound-to-light mode.Master-slave mode for synchronized shows.   ILDA interface for computer control.   Adjustable pattern size (X and Y axis).   Adjustable microphone sensitivity.   Advanced Features:Sealed optical compartment with separate cooling fins for reduced maintenance.   Safety features: key switch, interlock connector, on/off switch.   Front panel laser beam masking plate.   Capable of basic graphics, texts, and logos.   Several hundred colors, including white.   Mounting:360° mounting bracket. Technical Specifications Total Power: 800 mW (guaranteed)Laser Sources: Diode (Pure Diode)Wavelengths: 650 nm (red), 520 nm (green), 450 nm (royal-blue)   Beam Specifications: ca. 4 mm / 1.1 mrad   Scanning: 28 kpps @ 8° ILDA   Control Modes: DMX, Automatic, Sound-to-light, Master-slave, ILDA   Interfaces: DMX In/Out, ILDA In/Out   Safety: Key switch, interlock connector, on/off switch   Mounting: 360° mounting bracket    What's in the box Laserworld CS-1000RGB MK4 Laser ProjectorPower cordInterlock connector   KeyUser manual

Read more less

The Laserworld CS-2000RGB FX MK3 hasĀthree grating effectsĀbuilt in in addition to the graphics capable scanners:Āline grating and burst gratingĀ. Together with the ca. 130 (layers tunnels fences waves etc.) stored on the laser these effects offer a variety of combinations for impressive illumination of medium-sized to large locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time. The resultingĀextensiveness allows for effects that could not be achieved in any other way. But that's not everything the Laserworld CS-2000RGB FX MK3 has to offer: Ā The Laserworld CS-2000RGB FX MK3 is a pure diode analog modulated full color RGB laser system with a total output power ofĀup to 1'600 mWĀand a guaranteed output power of . The red laser source has an output power of 250 mW 635 nm the green of 250 mW 520 nm and theĀroyal-blueĀlaser source has an output power of 1'100 mW 450 nm. The diode laser sources ensureĀpowerful laser beams. The projector has good beam specifications with aĀbeam diameter of ca. 4 mmĀand beamĀdivergence of 1.1 mrad. The galvo system has aĀscan speed of up to 28kpps 8Ā ILDA. Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.Ā There is no airflow in the optical compartment the temperature is regulated through the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum. ThroughĀDMX in theĀstand-alone modeĀas well as in theĀsound-to-lightĀmodeĀabout ca. 130 (layers tunnels fences waves etc.)Ācan be projected in different colors and in various speed. If the stand-alone mode is active the pre-programmed patterns run without assistance and in the sound-to-light mode the laser system projects according to the sound. Next to the modes mentioned above this laser projector provides aĀmaster-slave-mode. Show lasers of the same series (slave projectors) connected via DMX cable to a main projector (master projector) project the same patterns like the master projector. The Laserworld CS-2000RGB FX MK3 isĀcomputer controllable through a professional ILDA interface. ThusĀown or pre-programmed lasershows logos texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller). There areĀsafety featuresĀlike a key switch an interlock and an on-off switch. The Laserworld CS-2000RGB FX MK3 show laser projector comes with aĀcompactĀhousing which isĀlight weightĀand has a stable bracket. The 360Ā mounting bracket allows forĀdifferent mounting positions:Āa hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows but also for fixed installations at a truss or at the ceiling. The Laserworld CS-2000RGB FX MK3 is ideal forĀsemi-professional applicationsĀand is perfectly suitable inĀmedium sized to large clubs and discosĀas well as forĀmobile DJs private useĀand in any other party location. Ā 1.6 W pure diode RGB laser system two additional grating effects: Line and Burst DMX controllable master-slave operation possible Full diode projector - no DPSS anymore Computer controllable via ILDA Plug play: Sound-to-light and stand-alone modes Capable of basic graphics - 28kpps 8Ā ILDA scanners Full color with analog modulation Front panel laser beam masking plate 360Ā mounting bracket

Read more less

The Laserworld CS-4000RGB FX Mk2 hasĀthree grating effectsĀbuilt in in addition to the graphics capable scanners:Āline grating and burst grating. Together with the ca. 130 (layers tunnels fences waves etc.) stored on the laser these effects offer a variety of combinations for impressive illumination of medium-sized to large locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time. The resultingĀextensiveness allows for effects that could not be achieved in any other way. But that's not everything the Laserworld CS-4000RGB FX has to offer: The Laserworld CS-4000RGB FX is a pure diode analog modulated full color RGB laser system with a total output power ofĀup to 4'000 mWĀand a guaranteed output power of 3'500 mW. The red laser source has an output power of 850 mW 635 nm the green of 850 mW 520 nm and theĀroyal-blueĀlaser source has an output power of 1'800 mW 450 nm. The diode laser sources ensureĀpowerful laser beams. The projector has good beam specifications with aĀbeam diameter of ca. 3 mmĀand beamĀdivergence of 1.4 mrad. The galvo system has aĀscan speed of up to 28kpps 8Ā ILDA. Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.ThroughĀDMX in theĀstand-alone modeĀas well as in theĀsound-to-lightĀmodeĀabout ca. 130 (layers tunnels fences waves etc.)Ācan be projected in different colors and in various speed. If the stand-alone mode is active the pre-programmed patterns run without assistance and in the sound-to-light mode the laser system projects according to the sound. Next to the modes mentioned above this laser projector provides aĀmaster-slave-mode. Show lasers of the same series (slave projectors) connected via DMX cable to a main projector (master projector) project the same patterns like the master projector. The Laserworld CS-4000RGB FX mk2 isĀcomputer controllable through a professional ILDA interface. ThusĀown or pre-programmed lasershows logos texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller). There areĀsafety featuresĀlike a key switch an interlock and an on-off switch. The Laserworld CS-4000RGB FX mk2 show laser projector comes with aĀcompactĀhousing which isĀlight weightĀand has a stable bracket. The 360Ā mounting bracket allows forĀdifferent mounting positions:Āa hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows but also for fixed installations at a truss or at the ceiling. The Laserworld CS-4000RGB FX mk2 is ideal forĀsemi-professional applicationsĀand is perfectly suitable inĀmedium sized to large clubs and discosĀas well as forĀmobile DJs private useĀand in any other party location. 3.5 W pure diode RGB laser system two additional grating effects: Line and Burst DMX controllable master-slave operation possible Full diode projector - no DPSS anymore Computer controllable via ILDA Plug play: Sound-to-light and stand-alone modes Capable of basic graphics - 28kpps 8Ā ILDA scanners Full color with analog modulation Front panel laser beam masking plate 360Ā mounting bracket

Read more less

The Laserworld CS-500RGB KeyTEX is a RGB text and pattern projection laser that does not need any software or additional controller for operation. It comes with a special keyboard and an infrared remote control. With the keyboard it is possible to control the whole show laser light system. Features of the CS-500RGB KeyTEX are: writes live text with the keyboard save texts and recall them later animate the texts: scrolling flipping typing of single letters rotations and many more features available through the keyboard trigger saved texts with infrared remote control play the preset patterns and effects in automatic mode or sound mode - this can be switched with the keyboard or the infrared remote control clock feature: set time and project it on any surface the projection (texts patterns) can be multiplied through a diffraction grating at the laser aperture controllable via DMX RGB projections This text laser is equipped with a strong red (650nm 180mW) green (532nm 80mW) and blue (445nm 160mW) laser source so the projections are well visible. The scanning systems allows for simple text projections and runs at ca. 15kpps4Ā. The mounting bracket of the EL-500RGB KeyTEX laser can be used to mount the projector at walls ceilings or at other appropriate objects.

Read more less

Laserworld DS-2000RGB MK4 - RGB Diode Laser System The Laserworld DS-2000RGB MK4 is a high-performance RGB diode laser system designed for professional lighting applications. Featuring "Pure Diode" laser sources, exceptional beam specifications, and versatile control options, this unit is ideal for creating stunning laser shows in clubs, events, and installations. With its integrated ShowNET network interface and included Showeditor software, the DS-2000RGB MK4 offers a complete solution for both beginners and experienced laser show designers.    Key Features Pure Diode Laser Sources:500 mW 638 nm red diode.   500 mW 520 nm green diode.   1400 mW 450 nm blue diode.   Analog color modulation for vibrant and smooth color mixing.   Exceptional Beam Specifications:Approximately 4 mm beam diameter.   Low beam divergence of 0.9 mrad.   Scanning speed up to 40 kpps @ 8° ILDA.   Maximum scan angle of 50°.   Versatile Control Options:Integrated ShowNET network interface for Showcontroller and Showeditor software.   ILDA input for compatibility with other laser control software (Pangolin Quickshow, Beyond, Lasergraph DSP, etc.).   Built-in memory with pre-set patterns (user-editable).   DMX control (DJ mode and Professional mode).   Stand-alone operation.ArtNET support.Integrated ShowNET and Free Software:Includes Showeditor laser control software for creating professional laser shows.   Showcontroller software compatibility (sold separately).Direct input via ILDA and LAN.   Trigger single frames via ArtNET.   Playback of custom frames and shows from integrated SD card (included).   Robust and Reliable Design:Sealed housing technology for minimal maintenance.   Integrated and switchable scan safety.Linking Capabilities:Link multiple units for synchronized shows.    Technical Specifications Total Power: 2000 mW (guaranteed)Laser Sources: Diode (Pure Diode)   Wavelengths: 638 nm (red), 520 nm (green), 450 nm (blue)   Beam Specifications: ca. 4 mm / 0.9 mrad (full angle)   Scanning: Up to 40 kpps @ 8° ILDA   Max. Scan Angle: 50°Modulation: AnalogControl Modes: Auto, DMX, ArtNET, ILDA, Stand-alone   Interfaces: ILDA In/Out, LAN (ShowNET), DMX In/Out, ArtNET   Software: Showeditor (included), Showcontroller (optional)   Safety: Integrated and switchable scan safety   Housing: Sealed Housing Technology    What's in the box Laserworld DS-2000RGB MK4 Laser SystemSD cardPower cordILDA cableLAN cableQuick Start GuideShoweditor laser control software (download)

Read more less

Laserworld DS-3000RGB MK4 (ShowNET) - RGB Diode Laser System The Laserworld DS-3000RGB MK4 (ShowNET) is a versatile and powerful RGB diode laser system that delivers stunning visuals and professional performance. Featuring "Pure Diode" laser sources, this unit offers brilliant colors, sharp beams, and analog color modulation for smooth transitions and effects. With its integrated ShowNET network interface, included Showeditor software, and multiple control modes, the DS-3000RGB MK4 is ideal for a wide range of applications, from live events and DJ sets to fixed installations and laser shows.    Key Features Pure Diode Laser Sources:650mW 638nm red diode.   900mW 520nm green diode.   1600mW 450nm blue diode.   Analog color modulation for smooth and vibrant color mixing.   High-Quality Beam Specifications:4mm beam diameter.1.1 mrad full-angle divergence.30 kpps @ 8° ILDA scanning speed.45° maximum scan angle.Integrated ShowNET Interface:Network DAC for seamless integration with Showcontroller and Showeditor software.   ILDA streaming for control with other ILDA-compatible software.   ArtNET support for triggering individual frames.   Versatile Control Modes:DMX control with two modes (DJ Mode and Professional Mode).   Stand-alone operation with pre-set patterns and custom shows from SD card (included).   ILDA control for advanced users.   Automatic and sound-to-light modes.Showeditor Software Included:Free and intuitive laser show software for creating professional shows.   Showcontroller software compatibility (optional upgrade).Additional Features:Sealed Housing technology for low maintenance.   Integrated and switchable scan fail safety.Compact and lightweight design. Technical Specifications Total Power: 3000 mW (guaranteed)Laser Sources: Diode (Pure Diode)   Wavelengths: 638 nm (red), 520 nm (green), 450 nm (blue)   Beam Specifications: 4 mm / 1.1 mrad (full angle)   Scanning: 30 kpps @ 8° ILDA   Max. Scan Angle: 45°Modulation: AnalogControl Modes: Auto, DMX, ArtNET, ILDA, Stand-alone   Interfaces: ILDA, LAN (ShowNET), DMX   Software: Showeditor (included), Showcontroller (optional)   Safety: Integrated and switchable scan fail safetyHousing: Sealed Housing Technology What's in the box Laserworld DS-3000RGB MK4 Laser SystemPower cordILDA cableLAN cableSD cardQuick Start GuideShoweditor laser control software (download)

Read more less

The Laserworld EL-230RGB Mk2 is a veratile RGB laser system with a total output power of up to 230mW.Ā The red diode laser module with a wavelength of 650nm the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of about 4mm and a beam divergence of about 1mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30Ā. About 50 preset basic patterns like layers tunnels fences waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted.There is an on-off switch at the rear side of this device. The Laserworld EL-230RGB is a good solution for first-time users and mobile use and it is often used in bars small clubs at private parties or for home use.

Read more less

Multicolor white light RGB special effects laser system with DMX automatic and music operation. This easy-to-use starry sky effect laser light is laser class 2 and thus very safe yet with bright well visible laser beams due to an even power distribution. Ideal for mobile DJs and small nightclubs. The Laserworld EL-300RGB is a multicolor RGB whitelight effect laser system with color change and controllable rotation and strobe. Despite the well visible laser beams with evenly distributed laser power due to special optics the Laserworld EL-300RGB is a class 2 laser light and thus much safer than comparable laser displays with a higher laser class. Lots of fine clearly visible colored laser beams look like a real starry sky at walls ceilings and other surfaces and draw attention at every party. The colors of the laser as well as dim rotation and strobe effects can be controlled by push buttons or via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated microphone can be adjusted. KEY FEATURES Very safe laser class 2 yet well visible laser beams Stand-alone and sound-to-light operation Remotely controllable via DMX Master-slave mode Effects can be adjusted manually with push buttons at the top of the device The red diode laser module with a wavelength of 638 nm the green diode laser module with a wavelength of 520 nm and the blue diode laser module with a wavelength of 450 nm ensure beautiful colors and bright beams. This special effect laser device of the Laserworld Ecoline Series comes with additional safety features like a key switch an Interlock connector and an on-off switch at the rear side of the device. The Laserworld EL-300RGB show laser is perfectly suitable for mobile DJs as well as small nightclubs and bars.

Read more less

Multicolor white light RGB special effects laser system with DMX automatic and music operation. This easy-to-use starry sky effect laser light is laser class 2 and thus very safe yet with bright well visible laser beams due to an even power distribution. Ideal for mobile DJs and small nightclubs. The Laserworld EL-300RGB is a multicolor RGB whitelight effect laser system with color change and controllable rotation and strobe. Despite the well visible laser beams with evenly distributed laser power due to special optics the Laserworld EL-300RGB is a class 2 laser light and thus much safer than comparable laser displays with a higher laser class. Lots of fine clearly visible colored laser beams look like a real starry sky at walls ceilings and other surfaces and draw attention at every party. The colors of the laser as well as dim rotation and strobe effects can be controlled by push buttons or via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated microphone can be adjusted. KEY FEATURES Very safe laser class 2 yet well visible laser beams Stand-alone and sound-to-light operation Remotely controllable via DMX Master-slave mode Effects can be adjusted manually with push buttons at the top of the device The red diode laser module with a wavelength of 638 nm the green diode laser module with a wavelength of 520 nm and the blue diode laser module with a wavelength of 450 nm ensure beautiful colors and bright beams. This special effect laser device of the Laserworld Ecoline Series comes with additional safety features like a key switch an Interlock connector and an on-off switch at the rear side of the device. The Laserworld EL-300RGB show laser is perfectly suitable for mobile DJs as well as small nightclubs and bars.

Read more less

Laserworld EL-400RGB MKII - 400mW RGB Laser Show System The Laserworld EL-400RGB MKII is a versatile RGB laser show system designed for plug-and-play operation and DMX control. It's perfect for creating dynamic in-air beam waves and tunnel effects, ideal for home parties, bars, mobile DJ events, and small to medium-sized clubs.    Key Features RGB Color Mixing:Red (650nm), green (532nm), and royal-blue (445nm) laser modules for vibrant colors, including stunning white light.   Moderate Output Power:Total output power of up to 400mW.   In-Air Effects:Projects beam waves and tunnel effects.   Multiple Control Modes:Plug-and-play operation for easy setup.   DMX control for advanced programming.   Sound-to-light mode with adjustable microphone sensitivity.   Standalone mode for automatic pattern playback.   Built-in Patterns:Approximately 50 preset effects (layers, tunnels, fences, waves, etc.).   High-Speed Motors:Step motors with 3-8 kpps for dynamic pattern creation.   Compact Design:Portable and easy to transport.Safety Features:Interlock connector for safety switch.Key switch for added security.Beam Specifications:Beam diameter of approximately 3 mm.   Beam divergence of approximately 2 mrad. Technical Specifications Laser Power: Up to 400mW totalLaser Modules:Red: 650nm diode laser   Green: 532nm DPSS laser   Blue: 445nm diode laser   Scan Speed: 3-8 kppsBeam Diameter: Approximately 3 mm   Beam Divergence: Approximately 2 mradControl Modes: DMX, sound-to-light, standalone, plug-and-play   Built-in Patterns: Approximately 50Colors: RGB, including white What's in the box Laserworld EL-400RGB MKII laser systemPower cableUser manual

Read more less

Sound controlled Plug Play laser projector with 60mw green output power. The compact Ecoline Stand Alone lasers are the cheapest Laserworld Ecoline models. Beside their small size the easy handling makes the unit interesting especially for beginners. The patterns and beam effects are changed by the integrated sound control. Because of this the handling of the EL-60G is thinkable easy. Due to its 532 wavelength and 60mW power the beams and patterns are well visible in higher distances too.

Read more less

Laserworld EL-900RGB - 900mW RGB Multi-Beam Laser Show System The Laserworld EL-900RGB is a comprehensive laser show system designed for mobile DJs and small nightclubs. It delivers a wide-angle, multi-beam laser display with vibrant RGB colors, creating an immersive visual experience.    Key Features Multi-Beam Output:Four beam apertures with individual step motors for a wide coverage.   Patterns designed to work cohesively for a room-filling effect.   High Output Power:Total output power of up to 900mW.   RGB Color Mixing:Red (650nm), green (532nm), and royal-blue (450nm) laser modules for vibrant colors, including white.   Wide Scan Angle:Curved design for a large horizontal deflection angle, covering the entire room.   Multiple Control Modes:Sound-to-light mode with adjustable microphone sensitivity.   Standalone mode with built-in patterns.   DMX control for advanced programming.   Built-in Patterns:Approximately 50 preset basic patterns (layers, tunnels, fences, waves, etc.).   Patterns programmed for diverse output across the four laser outlets.   High-Speed Motors:Fast step motors with 3-8 kpps for dynamic effects.   Beam Specifications:3 mm beam diameter at aperture.   Approximately 2 mrad beam divergence.    Technical Specifications Laser Power: Up to 900mW total   Laser Modules:Red: 650nm diode laser   Green: 532nm DPSS laser   Blue: 450nm diode laser   Scan Speed: 3-8 kppsBeam Diameter: 3 mmBeam Divergence: Approximately 2 mrad   Control Modes: Sound-to-light, standalone, DMX   Built-in Patterns: Approximately 50Colors: RGB, including white    What's in the box Laserworld EL-900RGB laser systemPower cableUser manual

Read more less

The FX-700 hydro is a 700mw RGB watproof laser made for outdoor use.The strong power of 700 mW makes the laser dots very well visible even though the whole unit is rated as class 3R laser system - thanks to the distribution of the overall power to the multiple dots. It is equipped with analog modulated RGB laser sources that can also create white.Due to the deflection of the effect the Laserworld FX-700 Hydro can cover a large area. The deflection angle is approximately 60Ā. The multi-mirror deflection unit can rotate in both directions and at different speeds which can either be controlled via the back panel menu or DMX. The operation mode settings can be adjusted with the control knobs at the back side of the unit which are also built waterproof. The whole system is rated waterproof according to the specifications of IP65. The housing of the laser is made of very robust metal. The whole unit is passively cooled so no fans are required. The Laserworld FX-700 Hydro has 5m long cables for connecting power and DMX in as well as DMX through. This helps for outdoor installations as not only the unit itself is waterproof but can also be mounted in a way that the connections are not exposed to environmental influences. Perfect for unattended installations no requirements for e-stop or key switch due to it being class 3R.

Read more less

Network interface for laser control including full Showeditor professional laser show control software license. Powerful laser control board with Digital-analog-converter (DAC) DMX ArtNET stand-alone and ILDA Streaming feature The ShowNET LAN interface can be used in different ways and combinations: as interface to Showeditor laser show control software (download hereĀfor free:Āhttps:www.showeditor.com) as automated playback system for laser shows as ĀDMX triggered playback system for laser shows forĀILDA Streaming: as ILDA IN - to - LAN - to - ILDA OUT adapter (ILDA range extender ILDA over LAN ILDA over Network) as DMX IN - to - LAN - to DMX OUT adapter Ā As LAN interface to Laserworld Showeditor The ShowNET interface is fully compatible to the professional Showeditor laser show control software. The Software can be downloaded for free on the Showeditor website:Āhttps:www.showeditor.com ShoweditorĀis anĀall-in-one laser show control softwareĀwhich comes with many easy-to-use featuresĀfor beginners as well as for professionals. It features intuitive creation of timeline based laser shows and ready-to-go live laser shows with simple operation and commands. The software includes more than 250 free laser shows and pre-configured MIDI profiles for immediate start. ILDA (*.ild) files can be exported and imported allowing an uncomplicated exchange between different software products. Showeditor also supports DMX input and output: It can be remote controlled through a DMX controller and it can control lighting fixtures of any kind.Ā Enhanced MIDI features grant the creation of own profiles. Thanks to the Figure Editor even laser show beginners succeed in creating own figures logos and running or morphing texts. Professional users benefit from advanced features like the abstracts generator color adaption and versatile optimization tools. The software user interface is available in English German French Spanish Italian Dutch and Romanian. As automated playback system for laser shows Especially fixed laser show installations often require an automated playback system. In many cases there is no possibility to install a computer control system. The Laserworld ShowNET interfaces come standard with a microSD card and the interfaces can read standard ILDA files (*.ild) - which can be exported from Laserworld Showeditor or any other laser software that supports ILDA file export.Ā When having saved the desired files to the microSD card a simple dip switch setting sets the interface to auto play mode - and automatically starts with playing back the show files saved on the microSD card. There are also many preset figures already saved to the internal memory of the ShowNET interface so these can be used for auto play as well. As ĀDMX triggered playback system for laser shows As described above the ShowNET can play back standard ILDA files from a microSD card. This playback feature does not only work in automatic mode but also allows for individual DMX triggering of the very patterns. Further modifications to the figure like e.g. intensity base color size offset etc. can be controlled through standard DMX512 protocol without having to save a specifically modified figure. This DMX controlled laser playback system feature makes the ShowNET even suitable for larger scale live laser show productions where the preset figures are often just triggered through a big high professional lighting controller.Ā For ILDA Streaming: As ILDA IN - to - LAN - to - ILDA OUT adapter (ILDA range extender ILDA over LAN ILDA over Network) - two interfaces required per signal line People that still use an older type USB DAC interface often face the problem of having to run long ILDA cables. However the possible overall length of ILDA cables is limited due to the way the signal is transmitted. So some people use USB - to - LAN extenders to transmit the USB signal over longer distances. However these solutions do not always work reliable - and especially if it comes to laser it is important to not receive any irritating signals on the control line. The Laserworld ShowNET interface is able to extend the ILDA signal from the ILDA output of any other ILDA outputting interface e.g. a Pangolin Flashback 3 (FB3) over any distance by transforming it to a digital TCPIP network signal. That way it is possible to use standard network switches and standard CAT cables for signal distribution. Even fiber cable transmission is possbile. It is possible to use up to 16 interfaces for inputting the ILDA signal to the network and up to 16 interfaces for outputting it again. Each input interface gets an individual address (can be set with dip switches) and the receiving interface is set to the corresponding receiver address (see manual for details). Then all input interfaces can be connected to a network switch all ouptput interfaces are connected to another network switch and those two switches are connected by one () network cable only. Of course if only one signal line shall be extended there is no need for any switches - Āa direct LAN cable is sufficient. Hardware features of ShowNET: XY scanner outputs with 12 bit resolution (4096 different positions on each axis) Color outputs with 8 bit resolution (256 different intensity values per color channel): red green blue intensity linked to green DMX512 input and output (non-isolated) 100 Mbit Ethernet port Flexible IP address setting: static address DHCP or AutoIP Internal MicroSD card for ILDA file playback (ILDA format code 45 RGB) can be accessed via LAN standalone operation and DMX INOUT via DMX-Adapter Maximum scan speed 100.000 points per second Up to 16 devices can be used in parallel for multiprojector laser shows Built-in ArtNet-to-DMX converter

Read more less