Gravity Stands
Gravity LS 431B - Lighting Stand Black
The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.
£139.00 £125.00
Gravity SP 2332 B Adjustable Speaker Pole
The SP 2332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 2332 B features an M20 bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport. ĀĀ
£19.00
Gravity BG RD C
Especially on tour it is important to protect your equipment from possible damage so that you can enjoy it for a very long time. Using the Gravity BG RD C cover which is perfectly matched to the KSX 2 RD you can protect your set-up from scratches and also keep it looking clean. Because the fine velvet material can also elegantly conceal unsightly cable runs or the usual cable tangle under the Rapid Desk. Even if the cover is illuminated with a light it does not become transparent. In short: The Gravity BG RD C cover protects your Rapid Desk and keeps the look of your set-up nice and tidy.
£29.00
Gravity MA TRAY 1 - Microphone Stand Tray
Gravity MA TRAY 1 - Microphone Stand Tray 360Ā adjustable steel trayĀ The MA TRAY 1 is a 360Ā adjustable steel tray that easily attaches to any microphone stand. The 250 x 195 mm size is large enough to accomodate tablet computers and holds accessories such as capos picks or small percussion instruments.
£20.00
Gravity LTS T 01 Laptop Stand
Compact and lightweight laptop stand Tray with adjustable holding pins Suitable for laptops tablets smaller mixers and effects Tray can be tilted by 180 degrees
£69.00
Gravity FD Seat 1
The FD Seat 1 from Gravity stands is an adjustable stool ideal for all types of musicians. Ā Made of metal with a breathable seat the chair can be adjusted in height and locked in to position. The ingenious height adjustment is based on a threaded rod but with a certain twist. For fine adjustment simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments however the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves And thirdly the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability. It is also foldable to allow easy transportation. Ā
£69.00
Gravity KSX 2 RD - Mobile DJ Stand
Especially on tour it is important that all instruments equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity KSX2RD set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus this combination works in pretty much every situation no matter if you're playing in the studio or practicing in the rehearsal room. Measuring 100 cm wide and 48 cm deep its large table surface provides you with plenty of room to arrange your laptop DJ mixer controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool. In terms of set-up all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.
£75.00
Gravity TSP 5212LB Speaker Stand
The hard conditions and extreme time pressures of touring are for strong workers and robust materials only - such as the Gravity Touring series speaker stand. Extremely sturdy with three double-braced legs and a die-cast aluminium mounting bracket. Especially strong steel tubing for a 50 kg load capacity. Set-up and take-down are extremely quick and safe thanks to the automatic snap-in LockPinĀ. The 35 mm extension pole is locked into place and the pin can only be unlocked with the release lever. The loudspeaker stand can be adjusted to a height of up to 194 cm. The locking screws with solid unlosable metal knobs are an invaluable advantage when touring. Ideal for rental and event organisers Extremely robust steel construction Double-braced legs Die-cast aluminium mounting bracket Automatic LockPinĀ Unlosable metal knobs.
£65.00
Gravity SA VESA 1
35 mm Pole Mount LCD TV Monitor Bracket with 7 VESA Hole Patterns Quickly and securely mounts monitors to 35 mm speaker poles For all flat screens with VESA hole patterns from 75 x 75 to 400 x 400 Durable heavy duty construction Maximum load capacity 30 kg Includes M8 and M6 monitor mounting screws This universal bracket is suitable for all flat screen monitors with VESA standard mounting hole patterns from 75 x 75 to 400 x 400 and securely clamps to 35 mm speaker poles. The heavy duty steel construction with black powder coating finish has a maximum load capacity of 30 kg and comes complete with sets of M8 and M6 monitor mounting screws.
£35.00
Gravity MSQT1B - Quick Tilt Ball Joint Mic Adapter
The Gravity Quick Tilt mic adapter features a ball joint and guide slot for 90Ā maximum tilt. The mic stand end has a 38" female thread and oversized set screw that facilitate 360Ā rotation and locking the adapter in place the 38" mic end sports an aluminium retainer ring. The all-metal GMSQT 1 B is ideal for rock-solid precision positioning of microphones portable digital audio recorders or cameras. It includes a 38" to Ā" adapter and works with any standard mic clip shock mount or stereo bar.
£14.00
Gravity SSP WB SET 1 Loudspeaker Stand
This rugged speaker stand has a much smaller footprint than tripods and a 35 mm rod with a high-strength steel sleeve ergonomic locking screw and safety stud for secure height adjustment. This stand is adjustable from 1.05 to 1.8 m in 7.5 cm increments. It comes with an additional weight disc from our patented VARI-WEIGHTĀ stability system ensuring both a more secure footing and more convenient transport of the system as a whole. The flat round base and the additional disc weigh 17.1 kg in total thereby ensuring excellent stability. Loudspeaker Stand with Base and Cast Iron Weight Plate. Ā Extremely robust construction made of steel and cast iron Small footprint Highly stable steel cuff for secure height adjustment 1.8 m maximum height Including VARI-WEIGHTĀ weight disc Ā
£89.00
Gravity BGSS 2 LB - Transport Bag for 2 Speaker Stands Long
Gravity BGSS 2 LB - Transport Bag for 2 Speaker Stands. The BGSS 2 LB is a heavy duty carry bag with 15 mm padding that holds 2 speaker stands. The bag is made from tough 600D nylon that is water repellent and easy to clean a padded divider keeps the stands separate to prevent scratches. The bottom and all points of stress are reinforced for extra strength comfortable carry straps and the heavy gauge single pull zipper closure of the lid provide handling convenience.
£45.00
Gravity RP 5555 GRN 1 - Universal Gravity Ring Pack
Gravity RP 5555 GRN 1 - Universal Gravity Ring Pack Sheen Green Universal Ring Pack suitable for all Gravity products Ā
£3.60
Gravity KSX 2 - Keyboard Stand
Gravity KSX 2 - Keyboard Stand X-Form double The KSX 2 is a hardwearing double brace X-style keyboard stand with 65 kg load capacity. A quick release clamping lever provides easy adjustment with a maximum height of 90 cm. The powder coated steel construction features reinforced joints for superior durability and long lasting non-slip end caps.Ā
£45.00 £30.00
Gravity SF 36 M10 M - Reducer Flange
Gravity SF 36 M10 M - Reducer Flange 36 mm to M10 male The SF 36 M10 M lets you attach devices with M10 nut mounting to a 35mm pole. Ideal for PAR lights.
£11.60
Gravity SF 36 M10 F - Reducer Flange
Gravity SF 36 M10 F - Reducer Flange 36 mm to M10 female The SF 36 M10 F lets you attach devices with M10 bolt mounting to a 35mm pole. Ideal for PAR lights.Ā
£11.60
Gravity SF 36 Z 38 M - Reducer Flange
Gravity SF 36 Z 38 M - Reducer Flange 36 mm to 38" male The SF 36 Z 38 M lets you attach devices with 38" bolt mounting to a 35mm pole. Ideal for microphone clips and boom arms.
£12.00
Gravity SS 5211 B SET 1 - Speaker Stand Set
Gravity SS 5211 B SET 1 - Speaker Stand Set 2 Speaker Stands with Bag This set includes two Gravity GSP5211B tripod speaker stands and the padded heavy duty GBGSS2B carry bag for convenient easy transport.
£110.00
Gravity SP 5211 B - Speaker Stand
The SP 5211 B is a classic tripod speaker stand made from thick walled yet lightweight powder coated aluminium tubing with a load capacity of 50 kg and 192 cm maximum height.Ā The die cast aluminium leg collar has been completely redesigned to provide superior durability and longevity the height adjustment collar is made of steel for additional strength and is virtually indestructable. It features a safety pin to securely lock the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. A set of black coding rings is included with the SP 5211 BĀ additional ring packs are available in a wide array of colors for instant personalization.
£43.00
Gravity MS 43 - Straight Microphone Stand With Folding Tripod Base
The MS 43 is a premium quality microphone stand with thick walled tubing powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection. For easy height adjustment the MS 43 sports a smooth durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. TheĀ custom designed retainer requires no tools for quick and secure microphone clip attachment. A set of black coding rings is included with the MS 43 additional ring packs are available in a wide array of colours for instant personalization.
£29.00 £14.99
Gravity SP 3202 VT- Vari- Tilt Studio Monitor Speaker Stand
The Gravity GSP 3202 VARITILTĀ monitor speaker stand features a heavy triangular cast iron base and 25 x 25 cm steel tray with isolating foam rests and variable tilt up to 10Ā. It is height-adjustable from 90 to 150 cm for optimum speaker positioning and comes with a set of spikes that mount to the large integrated rubber feet for superior acoustic coupling to the floor. Solid cast iron base Steel tray with isolating foam stripsBlack powder coating finish 50 kg load capacity Set of spikes included
£56.00
Gravity LS TB 01 - Universal T-Bar for 35 mm stands
This universal T-Bar allows you to convert any speaker stand or similar stand with 35 mm top tubing into a lighting stand. The aluminium tube allows the product to be both lightweight yet sturdy. The rugged die-cast T-Joint ensures superior stability and the quick-locking clamping mechanism allows the T-bar to be securely attached to the stand within seconds.Ā
£20.00
Gravity SP 5211 W - Speaker Stand (White)
The SP 5211 W is a classic tripod speaker stand made from thick walled yet lightweight powder coated aluminium tubing with a load capacity of 50 kg and 192 cm maximum height.The die cast aluminium leg collar has been completely redesigned to provide superior durability and longevity the height adjustment collar is made of steel for additional strength and is virtually indestructable. It features a safety pin to securely lock the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch non-slip thermoplastic coating for comfortable operation. A set of black coding rings is included with the SP 5211 BĀ additional ring packs are available in a wide array of colors for instant personalization.
£46.00
Gravity LS 431 C B - Lighting Stand and Speaker Stand
Lighting Stand and speaker stand with compact square steel base and off-centre mounting option. Compact heavy steel base for secure and stable standing Base with three M20 female threads and off centre mounting options 1.84m maximium height Conveninet carrying handle on the steel base Felt-covered feet for protection of the floor space
£116.00
