Power Amplifiers

Power-Amplifiers DJKIT®

Drive Your Sound: Explore Our Power Amplifiers For any passive PA speaker system, a reliable power amplifier is the engine that drives your sound, translating line-level audio signals into the raw power needed to move speaker cones. At DJKIT®, we offer a robust selection of power amplifiers designed for durability, efficiency, and exceptional audio delivery, ensuring your passive speakers perform to their full potential in any live setting.

The Engine of Your PA System Our range of power amplifiers includes models suitable for various applications, from powering small monitor wedges to driving large-format main PA speakers and subwoofers. We stock amplifiers with different power ratings (watts per channel), impedance compatibility (ohms), and channel configurations to match your specific speaker setup.

Explore amplifiers featuring advanced protection circuitry, efficient Class-D designs for reduced weight and heat, versatile input and output options (XLR, Speakon, binding posts), and various modes of operation (stereo, parallel, bridge mono). These features ensure consistent, clean power delivery even under demanding conditions.

Trusted Brands for Road-Ready Reliability We feature power amplifiers from the most respected names in professional audio, including Crown, Behringer, QSC, Electro-Voice, and Yamaha. These brands are renowned for their bulletproof reliability, high-fidelity audio reproduction, and ability to withstand the rigours of touring and continuous venue use.

Choosing the right power amplifier from DJKIT® means ensuring your passive speakers receive the clean, ample power they need to reproduce sound accurately and powerfully. Maximize your system's performance and impact.

Power your performance with confidence. Browse our collection of power amplifiers at DJKIT® today and unlock the full potential of your live sound system.

132 products


Best selling

Featured Best selling Alphabetically, A-Z Alphabetically, Z-A Price, low to high Price, high to low Date, old to new Date, new to old

  • Save -£700.00 Optimal Audio Zone 4P 4-Zone Powered Audio Control Optimal Audio

    Optimal Audio Zone 4P 4-Zone Powered Audio Control

    Optimal Audio Zone 4P - 4-Zone Powered Audio Controller with DSP & WebApp The Optimal Audio Zone 4P is a powerful and intuitive 4-zone powered audio controller, designed for straightforward and cost-effective installation in small to medium-sized applications. It integrates amplification and comprehensive audio signal management with DSP, allowing users to independently allocate and control sources across four configurable zones. Featuring an intuitive WebApp interface and seamless compatibility with other Optimal Audio products, the Zone 4P provides superb sound quality and easy access to everyday controls. Key Features 4 Configurable Zones: Independently allocate and control audio sources across up to four distinct areas. Integrated Amplification: Includes 4 channels of integrated amplification, eliminating the need for separate amplifiers for most small to medium applications. Comprehensive Inputs: Features 2 mic inputs (with 48V phantom power), 4 stereo line inputs (with SPDIF option on input 1), and 2 HDMI inputs for TV and video sound. WebApp Interface: Provides easy system configuration and everyday control via an intuitive WebApp. Flexible Signal Routing: Allows for full flexibility in routing audio signals to different zones. DSP with Loudspeaker Presets: Includes a full suite of audio controls and DSP for precise sound management. Programmable Presets & Timed Events: Supports fully programmable presets and timed events for automated control. Microphone Input Processing: Features fixed hi-pass filter, sweepable mid-band EQ, and HF shelf for mic inputs. ZonePad Compatibility: Designed to work seamlessly with ZonePad series for simple and intuitive control. Technical Specifications Type: 4 zone audio processor with DSP, amplification, and loudspeaker presets. Mic Inputs: 2 (with 48V phantom power, +12dB to +55dB gain). Mic Input Processing: Fixed hi-pass filter @160Hz; sweepable mid-band 200Hz-5kHz, +/-12dB; HF shelf @12kHz. Line Inputs: 4 stereo (with +26dB gain trim. SPDIF option on input 1). HDMI Inputs: 2. Line Outputs: 4. ZonePad Sockets: 4. Amplifier Channels: 4. Amplifier Power: 100W at 4Ω or 8Ω. Paging Inputs (CAT 5): 2. LAN Ethernet: 100Mbps. Alarm Override: Yes. Dimensions (W x H x D): 480mm x 88mm x 400mm (18.90” x 3.46” x 15.75”). Weight: 9.75kg (21.5lbs). Suitable For Bars. Back of house areas. Lobbies. Restaurants. Kitchens. Shop floors. Small to medium audio installations requiring multi-zone control and integrated amplification. Installations requiring TV/video sound integration. What's in the box Optimal Audio Zone 4P 4-Zone Powered Audio Controller. (Power cable and user manual

    £1,499.00 £799.00

  • W Audio EPX1200 Amplifier - DJKIT®

    W Audio EPX1200 Amplifier

    1 review

    The W-Audio EPX 1200 is an excellent professional amplifier where the price belies the quality. With up to 2 x 600 Watts RMS it certainly packs a punch and its rock solid build matches its reliability.

    £317.00

  • Digital Stereo Amplifier KAD-2 Digital stereo amplifier - DJKIT®

    Digital Stereo Amplifier KAD-2 Digital stereo amplifier

    This compact digital amplifier has four selectable inputs two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume tone and echo effects are adjustable through rotary controls. Master Volume Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifier A high output power of 55W max. per side 3.5mm stereo line input on the front panel 3 stereo line inputs on RCA Spring clip speaker output terminals 2 x 6.3mm microphone inputs

    £55.20

  • S260-WIFI Internet Streaming Amplifier S260-WIFI Multi-Streaming Ampli - DJKIT®

    S260-WIFI Internet Streaming Amplifier S260-WIFI Multi-Streaming Ampli

    Class-D miniature amplifier delivering up to 2 x 60W output with Bluetooth and WiFi streaming capability. Controlled from an Android or iOS smart phone the S260-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi network. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to be connected to the network. Wireless streaming of tracks and playlists stored on the smart phone can be sent from within the app or directly via Bluetooth to the amplifier. A line input is selectable for connection to a TV CD DVD or other playback device if required. In addition the S260-WIFI has inputs for USB and microSD card for playback of stored tracks. Provides a versatile "hands off" background music solution for continuous playback of music from internet services or a choice of other sources for bars cafes restaurants reception areas and house parties.2 x 60W class-D amplifier WiFi streaming with smart phone control Free WiiM Legacy Player app for Android or iOS Bluetooth receiver USBmicroSD player Stereo aux line input

    £135.20

  • Adastra S260-WIFI Internet Streaming Amplifier - DJKIT®

    Adastra S260-WIFI Internet Streaming Amplifier

    Class-D miniature amplifier delivering up to 2 x 60W output with Bluetooth and WiFi streaming capability. Controlled from an Android or iOS smart phone, the S260-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi network. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to be connected to the network. Wireless streaming of tracks and playlists stored on the smart phone can be sent from within the app or directly via Bluetooth to the amplifier. A line input is selectable for connection to a TV, CD, DVD or other playback device if required. In addition, the S260-WIFI has inputs for USB for playback of stored tracks. This neat unit provides a versatile "hands off" background music solution for continuous playback of music from internet services or a choice of other sources for bars, cafes, restaurants, reception areas and house parties.2 x 60W class-D amplifierWiFi or LAN streaming with smart phone controlFree WiiM Legacy Player app for Android or iOSBluetooth receiver & USB playerOptical digital audio inputLine output for additional amplifiers or active speakersContinuous internet streaming even after phone is disconnectedPower supply 24Vdc, 3A (in-line adaptor included)Amplifier : construction Class-DOutput power rms @ 4 Ohms 2 x 60WOutput power rms @ 8 Ohms 2 x 30WLoad impedance 4 or 8 OhmsSpeaker outputs L+R binding postsProcessor MediaTek MT7688 580MHzSampling format 192kHz, 24-bit max.Wireless connection 802.11b/g/n WiFi standard (up to 300Mbps)Bluetooth version 5.0Audio source WiFi, LAN, Bluetooth, USB, Optical, Line input (RCA)Dimensions 150 x 122 x 44mmWeight 494g

    £169.00

  • Digital Stereo Amplifier with Bluetooth KAD-2BT Digital stereo amplifi - DJKIT®

    Digital Stereo Amplifier with Bluetooth KAD-2BT Digital stereo amplifi

    This compact digital amplifier has three selectable stereo inputs two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume tone and echo effects are adjustable through rotary controls. Master Volume Treble and Bass rotaries control tone and overall output. This amp also features built-in media player Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifier A high output power of 55W max. per side 3.5mm stereo line input on the front panel 2 stereo line inputs on RCA Spring clip speaker output terminals 2 x 6.3mm microphone inputs Built-in media player with USB and SD card inputs and FM receiver Bluetooth connectivity

    £63.20

  • Kam KXR2000 Power Amp KAM

    Kam KXR2000 Power Amp

    KAM KXR2000 - 200W Professional Stereo Power Amplifier The Kam KXR2000 is a professional-grade 200 Watt Stereo Power Amplifier designed for a vast range of sound reinforcement environments. It features a 2U rack-mountable design with low noise, making it ideal for live sound, studio use, and commercial installations. Key Features 2U Rack Mountable: Designed for easy integration into standard equipment racks.2-Channel Stereo or Bridged Output Modes: Offers flexible configuration options.Forced-Air Cooling: Ensures continuous use and prevents overheating.Easy to Configure Front Panel Layout: Features large Channel 1 and 2 volume controls and a central mains on/off switch.Individual Channel Status LEDs: Indicators for Power, Clip, Signal, and Fault.Flexible Connectivity:2 x XLR inputs.2 x 1/4" jack inputs.2 x SpeakON outputs.2 pairs of 'banana' binding posts outputs.Separate ‘bridge’ binding post output.Rear Panel Switches: For Stereo/Bridge mode and Ground Lift.Internal Circuit Protection: Guards against Thermal, Short Circuit, and Overload.Switchable Operation Voltage: Can be changed from 240V to 110V for worldwide use.High-Quality Audio: Delivers faultless, high-quality audio with superb clarity and headroom.Impressive Signal/Noise Ratios. Technical Specifications Rack Size: 2UOutput Power Stereo 8 Ohms: 64WOutput Power Stereo 4 Ohms: 100WBridge 8 Ohms: 169WFrequency Response: 20Hz - 20kHzInput Sensitivity: AC1VMaximum Input Level: 5.5VInput Impedance Active Balanced: 20KohmsSignal/Noise Ratio: 84dBDimensions (L x W x H): 533 x 420 x 165 mmWeight: 6.3kg Suitable For Live-sound applications.Studio environments.Commercial installations. What's in the box Kam KXR2000 Power AmplifierPower CableUser Manual

    £169.00

  • RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD - DJKIT®

    RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD

    RM-series 100V Mixer-Amplifier with DAB+, BT, USB/SD The RM-series 100V Mixer-Amplifier is a versatile audio solution designed for distributed audio systems. It integrates DAB+ radio, Bluetooth connectivity, and a USB/SD media player, alongside mixer and amplifier functionalities, making it suitable for a wide range of commercial and public address applications. Key Features 100V Line Output: Ideal for driving multiple speakers in distributed audio setups. Integrated DAB+ Radio: Allows access to digital radio broadcasts. Bluetooth Connectivity: Enables wireless audio streaming from smartphones, tablets, and other Bluetooth-enabled devices. USB/SD Media Player: Provides direct playback of audio files from USB flash drives and SD cards. Mixer Functionality: Offers multiple input channels for connecting microphones and line-level audio sources. Integrated Amplifier: Delivers the necessary power to drive connected speakers. Technical Specifications Output: 100V lineMedia: DAB+, Bluetooth, USB, SD Mixer: Multiple input channels (number varies by model)Amplifier: Integrated power amplifier (wattage varies by model) What's in the box RM-series 100V Mixer-AmplifierPower cableUser manualAntenna for DAB+

    £379.00

  • Adastra A-series Multi Zone Stereo Amplifiers - DJKIT®

    Adastra A-series Multi Zone Stereo Amplifiers

    A-series Multi Zone Stereo Amplifiers A-series Multi Zone Stereo Amplifiers are designed for installations requiring high-quality stereo sound in multiple rooms or listening areas. These amplifiers feature 2 microphone inputs, switchable stereo inputs for each zone, and an integrated media player with USB/SD playback, Bluetooth, and FM radio. Key Features Multi-Zone Output: Independent stereo output for multiple listening areas. Microphone Inputs: 2 microphone inputs live to all output zones. Switchable Stereo Inputs: Each zone has a rotary switch to select between 2 rear stereo inputs, front 3.5mm stereo input, or the built-in media player. Integrated Media Player: Playback of MP3 audio tracks from USB drive or SD card, Bluetooth wireless receiver, and FM radio tuner. Euroblock Speaker Terminals: For secure and reliable speaker connections.High Power Output: Delivers up to 200W per output at 4 Ohms. Technical Specifications Output: Stereo, multi-zone Microphone Inputs: 2 (live to all zones) Stereo Inputs: 2 rear, 1 front 3.5mmMedia Player: USB/SD MP3 playback, Bluetooth, FM radio Speaker Connections: Euroblock terminalsOutput Power: Up to 200W per output at 4 Ohms What's in the box A-series Multi Zone Stereo AmplifierPower cableUser manualFM antenna

    £339.00

  • QTX KAD-2 Digital stereo amplifier QTX

    QTX KAD-2 Digital stereo amplifier

    This compact digital amplifier has four selectable inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. A multi-purpose amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel3 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputsPower supply 230Vac, 50Hz (IEC)Output impedance 4 - 8 OhmsInput sensitivity : line 380mVInput sensitivity : mic (unbalanced) 15mVOutput power : 8 Ohms 2 x 25W rms / 2 x 40W max. (EIAJ Standard @ 1kHz 10% THD)Output power : 4 Ohms 2 x 35W rms / 2 x 55W max. (EIAJ Standard @ 1kHz 10% THD)Finish BlackDimensions 200 x 200 x 65mmWeight 1.6kg

    £69.00

  • QTX KAD-2BT Digital stereo amplifier with Bluetooth QTX

    QTX KAD-2BT Digital stereo amplifier with Bluetooth

    This compact digital amplifier has three selectable stereo inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. This amp also features built-in media player, Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use.Efficient Class D digital amplifierA high output power of 55W max. per side3.5mm stereo line input on the front panel2 stereo line inputs on RCASpring clip speaker output terminals2 x 6.3mm microphone inputsBuilt-in media player with USB and SD card inputs and FM receiverBluetooth connectivityPower supply 230Vac, 50Hz (IEC)Output impedance 4 - 8 OhmsInput sensitivity : line 380mVInput sensitivity : mic (unbalanced) 15mVOutput power : 8 Ohms 2 x 25W rms / 2 x 40W max. (@ 1kHz 10% THD)Output power : 4 Ohms 2 x 35W rms / 2 x 55W max. (@ 1kHz 10% THD)Finish BlackDimensions 200 x 200 x 65mmWeight 1.6kgBluetooth version 2.3

    £79.00

  • Adastra S460-WIFI Streaming Amplifier Adastra

    Adastra S460-WIFI Streaming Amplifier

    Class-D dual stereo amplifier delivering up to 4 x 60W output with Bluetooth and internet streaming capability. Two internal amplifiers have individual volume control, allowing different music levels in 2 separate areas. Controlled from an Android or iOS smart phone, the S460-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi or wired RJ45 network connection. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide. Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to be connected to the network. Wireless streaming of tracks and playlists stored on the smart phone can be sent from within the app or directly via Bluetooth to the amplifier. A line input is selectable for connection to a TV, CD, DVD or other playback device if required. In addition, the S260-WIFI has an input for USB for playback of stored tracks. Provides a versatile background music streaming solution for continuous playback of music from internet services or a choice of other sources for bars, cafes, restaurants, reception areas and house parties.Built-in WiFi receiverRJ45 wired LAN connectionBluetooth connectivity2 individual 2 x 60W amplifiersFree WiiM Legacy Player app for Android or iOSUSB audio playerInternal power supplyContinuous internet streaming even after phone is disconnectedPower supply 110-240Vac, 50/60Hz (IEC)Amplifier : construction 2 x stereo class-D amplifiersOutput power rms @ 4 Ohms 4 x 60WOutput power rms @ 8 Ohms 4 x 30WLoad impedance 4 or 8 OhmsSpeaker outputs L1, R1, L2, R2 +/- screw terminals (Euroblock)Processor MediaTek MT7688 580 MHzSampling format 192kHz, 24-bit max.Network spec RJ45 LAN and 802.11b/g/n WiFi standard (up to 300Mbps)Bluetooth version v5.0Audio source WiFi, LAN, Bluetooth, USB, Line input (RCA)Dimensions 280 x 237 x 44mmWeight 1.772kgLine outputs L1 + R1 and L2 + R2 (RCA)

    £259.00

  • QTX QA400 Power Amplifier QTX

    QTX QA400 Power Amplifier

    Professional dual channel power amplifiers delivering high quality, dependable performance at an accessible price. Design of these workhorse amplifiers has been focused upon high power delivery without over-complicated features adding excessive costs. Yet still, these units are furnished with multiple connection possibilities and self protection circuitry to ensure that they will deliver, whatever the application.High power deliveryOverheat/overload protectionMultiple input and output connection types2U 19" rack mountableBalanced and unbalanced inputsPower supply 110/240Vac, 50/60Hz (IEC)THD 0.25%SNR 90dBInputs Combo (6.3mm jack + XLR) and RCAOutputs SPK, 6.3mm jack and 4mm binding posts

    £169.00

  • QTX Q600 power amplifier 2 x 300W QTX

    QTX Q600 power amplifier 2 x 300W

    1 review

    Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Power supply 230Vac, 50Hz (IEC)Frequency response 20Hz - 20kHzInput connectors 6.3mm jack, RCA (L+R)Input sensitivity 775mV, 10k OhmsOutput connectors 6.3mm jack, SPK, 4mm binding posts (L+R)S/N ratio >98dBTHD <0.5%

    £179.00

  • QTX Q240 power amplifier 2 x 120W QTX

    QTX Q240 power amplifier 2 x 120W

    Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Power supply 230Vac, 50Hz (IEC)Frequency response 20Hz - 20kHzInput connectors 6.3mm jack, RCA (L+R)Input sensitivity 775mV, 10k OhmsOutput connectors 6.3mm jack, SPK, 4mm binding posts (L+R)S/N ratio >98dBTHD <0.5%

    £129.00

  • QTX QA1000 Power Amplifier QTX

    QTX QA1000 Power Amplifier

    Professional dual channel power amplifiers delivering high quality, dependable performance at an accessible price. Design of these workhorse amplifiers has been focused upon high power delivery without over-complicated features adding excessive costs. Yet still, these units are furnished with multiple connection possibilities and self protection circuitry to ensure that they will deliver, whatever the application.High power deliveryOverheat/overload protectionMultiple input and output connection types2U 19" rack mountableBalanced and unbalanced inputsPower supply 110/240Vac, 50/60Hz (IEC)THD 0.25%SNR 90dBInputs Combo (6.3mm jack + XLR) and RCAOutputs SPK, 6.3mm jack and 4mm binding posts

    £259.00

  • QTX Q480 power amplifier 2 x 240W QTX

    QTX Q480 power amplifier 2 x 240W

    Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Power supply 230Vac, 50Hz (IEC)Frequency response 20Hz - 20kHzInput connectors 6.3mm jack, RCA (L+R)Input sensitivity 775mV, 10k OhmsOutput connectors 6.3mm jack, SPK, 4mm binding posts (L+R)S/N ratio >98dBTHD <0.5%

    £169.00

  • Citronic D600 Class-D Amplifier 2 x 300Wrms Citronic

    Citronic D600 Class-D Amplifier 2 x 300Wrms

    Stereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different configurations to handle even the most demanding of sound reinforcement duties.Compact and lightweight 1U rack formatCool and efficient operation even at high outputSwitchable parallel and bridge modesPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut filter 75Hz switchableInput connections L+R XLR female (L+R XLR male through)Output connections L+R SPK connectors (+1 for bridge mode)Dimensions 482 x 245 x 44mm

    £289.00

  • Citronic D300 Class-D Amplifier 2 x 150Wrms Citronic

    Citronic D300 Class-D Amplifier 2 x 150Wrms

    Stereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different configurations to handle even the most demanding of sound reinforcement duties.Compact and lightweight 1U rack formatCool and efficient operation even at high outputSwitchable parallel and bridge modesPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut filter 75Hz switchableInput connections L+R XLR female (L+R XLR male through)Output connections L+R SPK connectors (+1 for bridge mode)Dimensions 482 x 245 x 44mm

    £249.00

  • Citronic D1000 Class-D Amplifier 2 x 500Wrms Citronic

    Citronic D1000 Class-D Amplifier 2 x 500Wrms

    Stereo power amplifier in a lightweight 1U rack-mountable housing. Class-D circuit architecture efficiently converts power into impactful audio for driving medium to large speaker cabinets. Custom cool guide technology ensures consistent and reliable operation and an inbuilt limiter circuit engages at peak output to prevent speaker overload. Options for parallel and bridge mode with selectable input levels and 75Hz low cut filter allow for different configurations to handle even the most demanding of sound reinforcement duties.Compact and lightweight 1U rack formatCool and efficient operation even at high outputSwitchable parallel and bridge modesPower supply 220-240Vac, 50/60Hz (IEC)Modes Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0.775V - 1.0V - 1.44V switchableLow-cut filter 75Hz switchableInput connections L+R XLR female (L+R XLR male through)Output connections L+R SPK connectors (+1 for bridge mode)Dimensions 482 x 245 x 44mm

    £339.00

  • QTX Q1000 power amplifier 2 x 500W QTX

    QTX Q1000 power amplifier 2 x 500W

    Stereo workhorse power amplifiers with multiple input and output connection options. Designed for accurate and reliable service for venues, DJs and performers.6.3mm jack or RCA inputsSPK, 6.3mm jack or 4mm post outputsFan cooled19" rack-mountable (2U)Power supply 230Vac, 50Hz (IEC)Frequency response 20Hz - 20kHzInput connectors 6.3mm jack, RCA (L+R)Input sensitivity 775mV, 10k OhmsOutput connectors 6.3mm jack, SPK, 4mm binding posts (L+R)S/N ratio >98dBTHD <0.5%

    £239.00

  • Citronic D4200 Quad Amplifier 4 x 200Wrms Citronic

    Citronic D4200 Quad Amplifier 4 x 200Wrms

    Quad digital power amplifier in a lightweight 1U rack-mountable format. An energy-efficient switch-mode power section and class-D amplifiication circuit delivers accurate power-on-demand to four independent speaker outputs. Proprietary cool guide technology provides stable temperature management for dependable operation. Each pair of output channels can be separately parallel switched or bridged as a full or part stereo amplifier configuration. For channel A, there is a switchable 120Hz low-pass filter for use with subwoofers and a channels C and D have a switchable stereo pair of 120Hz high pass filters to effectively focus power in full-range cabs operating as mid-tops in conjunction with sub-woofers. For permanent or mobile installations, the D-series offers an invaluable and flexible problem solver for audio designers and sound engineers.Switchable bridge or parallel mono modesSwitchable high and low pass filtersFully balanced audio signal pathFull audio and power protection with peak limiterConfigurable as a quad, stereo or 2.1 systemPower supply 220-240Vac, 50/60Hz (IEC)Modes 2 x Stereo, Parallel (mono), Bridge (mono)Input sensitivity 0dB = 0.775VrmsInput connections 4 x XLR femaleSound output 4 x SPK connectorsDimensions 482 x 248 x 44mm (without feet)Crossover Input A 120Hz LPF and C+D 120Hz HPF (all switchable)

    £429.00

  • Citronic H2400 Hybrid Amp 2x900W @ 4ohm Citronic

    Citronic H2400 Hybrid Amp 2x900W @ 4ohm

    Lightweight power amplifiers in a 19" rack-mountable housing for generating high sound pressure levels in medium to large sound reinforcement systems. H-series amplifiers employ a new hybrid class-H architecture, which combines the streamlined efficiency of a digitally controlled power section design with the power delivery and stability of a professional class-H output stage. Comprehensive internal protection monitors any thermal or overload conditions, automatically mutes at power on/off and provides active inrush limiting. A digital display continually shows the supply voltage, internal temperature and output level. A fully balanced signal path has 3 switchable input sensitivity levels to match different audio sources and the amplifier section can be set to operate in Stereo, Parallel or Bridge modes. A switchable 120Hz low-pass filter can be selected for use with subwoofers, avoiding the need for a separate crossover and saving additional expense and rack space. Speaker outputs can be connected using 1 or 2 Speakon leads as required. H-series amplifiers provide immediate and dynamic power on demand for sound contractors and PA installers that need dependable service with optimum sound quality.Hybrid class-H circuit designDigitally controlled and monitored power sectionSwitchable 120Hz low-pass crossoverBacklit LCD status displayFull internal thermal and overload protectionStable down to 2 Ohms (4 Ohms bridged)Power supply 200-240Vac, 50Hz (IEC)Amplifier : construction Hybrid Class-HProtection Short/open circuit, thermal, RF, DC fault, on/off mute, active inrushFrequency response 20Hz-20KHz ±0.5dBTHD +N 0.2%S/N ratio -95dBDamping factor >700Input sensitivity 1.0V - 1.4V - 2.0V switchableInput impedance 20KΩ (balanced),10KΩ (unbalanced)Crossover Switchable full range or fixed 120Hz low-pass filter

    £539.00

  • Citronic H3200 Hybrid Amp 2x1200W @4ohm Citronic

    Citronic H3200 Hybrid Amp 2x1200W @4ohm

    Lightweight power amplifiers in a 19" rack-mountable housing for generating high sound pressure levels in medium to large sound reinforcement systems. H-series amplifiers employ a new hybrid class-H architecture, which combines the streamlined efficiency of a digitally controlled power section design with the power delivery and stability of a professional class-H output stage. Comprehensive internal protection monitors any thermal or overload conditions, automatically mutes at power on/off and provides active inrush limiting. A digital display continually shows the supply voltage, internal temperature and output level. A fully balanced signal path has 3 switchable input sensitivity levels to match different audio sources and the amplifier section can be set to operate in Stereo, Parallel or Bridge modes. A switchable 120Hz low-pass filter can be selected for use with subwoofers, avoiding the need for a separate crossover and saving additional expense and rack space. Speaker outputs can be connected using 1 or 2 Speakon leads as required. H-series amplifiers provide immediate and dynamic power on demand for sound contractors and PA installers that need dependable service with optimum sound quality.Hybrid class-H circuit designDigitally controlled and monitored power sectionSwitchable 120Hz low-pass crossoverBacklit LCD status displayFull internal thermal and overload protectionStable down to 2 Ohms (4 Ohms bridged)Power supply 200-240Vac, 50Hz (IEC)Amplifier : construction Hybrid Class-HProtection Short/open circuit, thermal, RF, DC fault, on/off mute, active inrushFrequency response 20Hz-20KHz ±0.5dBTHD +N 0.2%S/N ratio -95dBDamping factor >700Input sensitivity 1.0V - 1.4V - 2.0V switchableInput impedance 20KΩ (balanced),10KΩ (unbalanced)Crossover Switchable full range or fixed 120Hz low-pass filter

    £679.00

DJKIT Trustpilot Logo

© 2025 DJKIT® is a registered trademark

    • Dopplepay Finance
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    PRO DJKIT Ltd is an Introducer Appointed Representative of Social Money Ltd t/a Dopple, a company registered in England under company number 08054296, and is authorised and regulated by the Financial Conduct Authority and is entered on the Financial Services Register under reference number 675283. Registered with the Information Commissioner's Office under reference number ZA026178.

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Page Type : collection