Eliminator Lighting Roto Kraze – Multi-Effect LED Beam, Wash, Strobe & Laser Centerpiece
Buy the Eliminator Lighting Roto Kraze (ADJ1900000057), a dynamic 4-in-1 multi-effect party and club centerpiece featuring six 15W RGBW beam LEDs, four 10W RGBW wash LEDs, dual red and green aerial lasers, 108 animated SMD LEDs, and six 5W warm amber accents. In stock, fast UK delivery.
The Eliminator Lighting Roto Kraze (distributed by ADJ / Prolight Concepts) is an all-in-one, high-impact multi-effect lighting centerpiece engineered for mobile DJs, nightclubs, entertainment bars, roller rinks, bowling centers, and event production rigs. Combining four distinct lighting technologies inside a compact 3.6kg chassis, the Roto Kraze delivers a complete, room-filling light show from a single fixture. The primary light engine utilizes six 15W 4-in-1 RGBW LEDs to project punchy rotating mid-air beams, complemented by four 10W RGBW LEDs providing wide-angle color washes. To maximize energy, the unit integrates dual 100mW red and 100mW green diffraction lasers, six 5W amber LEDs for warm tungsten-style accents, and an outer ring of 108 animated RGB SMD LEDs that generate eye-candy chases and high-speed strobe bursts up to 20 flashes per second. With flexible control options including 17 and 31 DMX channel profiles, sound-active mode, automated pre-programmed shows, and IR remote compatibility, the Roto Kraze transforms any dancefloor instantly.
Staff Take: The Expert Verdict
The single strongest selling point of the Eliminator Lighting Roto Kraze is its true all-in-one centerpiece versatility in a lightweight 3.6kg housing. Carrying separate fixtures for moving beams, wide washes, aerial lasers, and strobe rings takes up massive van space and requires complex truss rigging. The Roto Kraze merges all four effects into a unified rotating chassis that blankets ceilings and dancefloors simultaneously. The standout feature is the addition of six 5W dedicated amber LEDs alongside the 108 animated SMD ring LEDs, adding warm golden accents and complex matrix chases that elevate it far beyond typical budget party lights. We highly recommend this fixture for mobile wedding and party DJs, function bars, and youth venues that need a high-energy centerpiece with rapid setup and low power draw.
Why Choose the Eliminator Lighting Roto Kraze?
-
4-in-1 multi-effect centerpiece: Combines high-velocity rotating RGBW beams, wide color washing, dual RG lasers, and animated SMD eye-candy effects.
-
Six 15W RGBW beam LEDs: High-output quad-color LEDs fire vivid, multi-colored razor beams across dancefloors and walls.
-
Wide 40W wash coverage: Four 10W RGBW LEDs flood the surrounding room with smooth, saturated color washes.
-
Dual red and green diffraction lasers: 100mW red and 100mW green laser diodes project hundreds of sharp, geometric laser beams and starfield patterns.
-
108 animated RGB SMD LEDs: High-density LED ring creates intricate animated chases, color wipes, and high-speed strobe pulses up to 20Hz.
-
Dedicated 5W amber accents: Six warm amber LEDs inject golden depth and rich vintage color tones into the mix.
-
Flexible DMX and wireless IR control: Features 17 and 31 DMX channel modes alongside Primary/Secondary linking, Auto programs, Sound Active mode, and UC-IR wireless remote support.
-
Ultra-compact, road-ready design: Weighs just 3.6kg with integrated carry handles, non-slip rubber feet, and a heavy-duty mounting bracket for floor or overhead rigging.
Who is the Eliminator Lighting Roto Kraze best suited for?
The Eliminator Lighting Roto Kraze is designed first and foremost for mobile DJs, mobile entertainers, and traveling party hosts who need an expansive visual show with minimal setup time. Because it bundles four separate lighting types into one compact fixture, solo performers can mount a single unit to a central lighting stand or T-bar, engage Sound Active mode, and instantly transform a function room without running complex DMX universes.
For secondary applications, this multi-effect is an outstanding centerpiece for small nightclubs, roller rinks, leisure centres, and student union bars. Its dual laser effects, strobing SMD rings, and sweeping color beams provide constant high-energy movement that keeps dancefloors visually dynamic all night long.
Eliminator Lighting Roto Kraze vs Standard Multi-Effects — What's Changed?
The primary advantage of stepping up to the Roto Kraze over standard multi-effects (like basic derby/laser combos) is the visual depth created by its five separate optical layers. Most entry-level effects combine only a simple RGB derby lens with a flashing white strobe. The Roto Kraze integrates six 15W high-power beams, dedicated 10W room washes, dual 100mW lasers, a 108-piece animated SMD matrix, and dedicated 5W amber diodes for warmth.
Secondary enhancements focus on programming depth and fixture construction. With 17 and 31 DMX channel modes, lighting technicians can isolate each individual effect layer over a lighting desk, control strobe speeds up to 20Hz, and run smooth 0–100% linear dimming, while integrated side carry handles make transport significantly easier.
How to Set Up the Eliminator Lighting Roto Kraze
-
Secure the unit to an overhead lighting stand or trussing using the included heavy-duty mounting bracket and a certified M10/M12 clamp, or set it on a level stage riser on its built-in rubber feet.
-
If rigging overhead, always loop an approved secondary safety wire bond through the designated safety eyelet.
-
Connect the laser safety key into the rear interlock switch and turn to the ON position.
-
Plug a 3-pin XLR DMX cable into the DMX IN port for lighting desk operation, or select standalone Auto or Sound Active mode using the rear 4-button LED digital display.
-
Connect the IEC mains power cable to the power input and switch the unit on.
-
Daisy-chain power to additional fixtures using the IEC power pass-through socket if building a linked multi-fixture rig.
-
Calibrate your sound sensitivity dial or launch your automated DMX cues from your lighting controller.
Technical Specifications
Frequently Asked Questions
What four effects are combined in the Roto Kraze?
The Roto Kraze integrates:
-
Rotating multi-color beams (six 15W RGBW LEDs)
-
Broad color wash lighting (four 10W RGBW LEDs)
-
Dual aerial diffraction lasers (100mW red and 100mW green)
-
Animated eye-candy patterns and strobes (108 RGB SMD LEDs and six 5W amber accents)
Can the Roto Kraze be controlled without a DMX console?
Yes. The fixture includes pre-programmed Auto shows and beat-synchronized Sound Active modes that run straight out of the box. It is also compatible with optional ADJ UC-IR wireless handheld remotes for quick manual triggering.
Can I control each effect independently over DMX?
Yes. In its expanded 31-channel DMX mode, you have independent control over the rotation, color mixing, beam layers, wash intensity, amber accents, laser patterns, and SMD chase speeds.
Does the fixture have power linking capabilities?
Yes. The rear panel includes an IEC power loop-out socket, allowing you to daisy-chain mains power to adjacent lighting fixtures on your T-bar or truss rig from a single wall outlet.
Does it require a safety key to operate the laser?
Yes. In compliance with venue laser safety standards, the Roto Kraze features a rear key-switch lock to prevent unauthorized operation of the internal red and green laser diodes.
What's In The Box?
-
1 × Eliminator Lighting Roto Kraze Multi-Effect Fixture (ADJ1900000057)
-
1 × Adjustable Heavy-Duty Metal Mounting Yoke Bracket
-
2 × Laser Safety Interlock Keys
-
1 × UK IEC Mains Power Cable
-
1 × Operational User Instruction Manual
Why Buy From DJKIT?
When you order your party lighting and stage effects from djkit®, you are partnering with an established UK audio and lighting retailer supporting mobile DJs, venue integrators, and entertainers since 1999. Our in-house lighting specialists regularly test multi-effect fixtures, moving heads, and laser units alongside DMX controllers, giving us the practical experience to advise you on room coverage, bracket rigging, and laser safety guidelines.
Whether you need assistance building a complete mobile lighting rig or selecting compatible transport bags and clamps, our sales team is here to help. Contact our specialists today on 01635 780002 or send a message to our main support desk. We offer flexible 0% finance options, real-time stock allocation, and fast UK mainland delivery to get your dancefloor rocking.
