The ADJ Fog Fury Jett Pro is a high velocity vertical Fog Machine that mixes colour into the fog from 28x 3-Watt LEDs (6 Red 7 Green 6 Blue 3 Amber & 6 UV LEDs). The Fog Fury Jett Pro produces a dry even blast of fog over 40 feet (12 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts.
The Fog Fury Jett Pro may be use vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down. Control options included 3-pin and 5-pin DMX In/Out connections ADJ’s WiFLY EXR wireless DMX on-board plus the ADJ FFJWR wireless remote comes included in the box.
Specifications:
Source
28 x 3-Watt LEDs (6 Red 7 Green 6 Blue 3 Amber & 6 UV LEDs)
Control
• DMX Channels: 1 2 3 7 or 9 DMX channels
• LED zone control in 7 & 9 ch. DMX mode
• Remote Control Included: FFJWR
• Manual control
Output
• Output: 40000 Cubic Feet/1.132m3 Per minute
• Heater: 1450 Watts
• Heat Up Time: 9 min
• Fluid Type: Water Based Fog Fluid
• Fluid Consumption: 150ml/min
• On board control or Wireless DMX
Construction
• Operates in multiple positions
• Metal housing
• LED display
Electrical
• AC 120V/60Hz or 240/50Hz (non switching)
• Power Draw: 1550 W
• ADJ’s Electronic Thermo Sensing (ETS) technology
Connections
• Data: 3-pin & 5-pin DMX In/Out
• Power: IEC C13 plug
• WiFLY EXR Wireless DMX
Dimensions
• Dimensions (LxWxH): 419 x 315 x 206mm
• Weight: 9.5 kg
• Tank Size: 2.5 Liter removable tank
What’s Included
• Manual
• FFJWR wired remote
• IEC C13 Power Cable
