Discontinued
This product has now been discontinued
Earn
1,198
djkit® loyalty points
SKU:
DJK09807
Special Offers
When bought with this product
Product Description
The JBL EON210P Portable PA System consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord.
Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown Class-D power amplifier and integrated mixer.
Technical Specs
300 watt High-Performance Powered Speaker System
Ergonomic soft touch top grip for easy handling
10” low-frequency driver with neodymium magnet for low-distortion and light weight
1” throat diameter next generation JBL neodymium compression driver
Efficient Crown Class-D amplifier technology
100° H x 60° V asymmetrical wave guide for uniform audience coverage
8 chanel powered mixer with intuitive interface
On board digital multi-effects
Integrated 36 mm pole mount socket with stabilizing securing screw
Highly designed composite enclosures for durability, lightweight, and acoustic performance
System Power Rating : 300 Watts (2 X 150 Stereo)
Maximum SPL Output : 124 dB peak
Net Weight of System : 33 lbs. (19 lbs. for unit with powered mixer,
14 lbs. for unit with storage pod)
System Type : Powered mixer with 2 two-way bass-reflex enclosures
Frequency Range (-10 dB) : 60 Hz - 20 kHz
Frequency Response (±3 dB) : 75 Hz - 19 kHz
Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
Output Connectors : Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack
EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
System Limiter : On Board DSP Limiting and Tuning
LF Driver : 1 x JBL 328 H 250 mm (10 in) woofer
HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver
Coverage Pattern : 100º x 60º nominal
Crossover Frequency : 2 kHz
Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
Enclosure : Polypropylene
Suspension/ Mounting : 36 mm pole socket with stabilizing screw
Handles : One on top
Grille : Powder coated perforated steel
Shipping Package (HxWxD) : 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)
