Stage Equipment

UDG Ultimate Fold Out DJ Table is the perfect companion piece for the DJ who likes to go completely modular. Use it for a home studio set up or on stage. Constructed from sturdy 9mm thick plywood the outer sides are laminated in a black finish with honeycombhexagonal "Stage Grip" pattern. It features built-in center wheels on one side with high quality in-line skate bearings for convenient transport and heavy-duty spring-loaded handles for secure lifting and loading. UDG Ultimate Fold Out DJ Table provides a clean professional appearance and is conveniently easy to set up or tear down. Increased product dimension over earlier version Updated with rounded corner table Includes new cable access with cover Improve powder coated anodized hardware Heavy duty construction of 9 mm vinyl laminated plywood Laminated in a white finish with honeycombhexagonal "Stage Grip"Āpattern Solid aluminum profiles and spring-loaded latches Sturdy construction UDG heavy-duty spring-loaded handles Built-in center wheels with high quality in-line skate bearings for convenient transport Utility shelf for storage Recessed butterfly twist latch lock

Read more less

Sturdy lighting stand with 3m wide triangle truss pre-drilled to facilitate mounting on all three sides. Easy to assemble with height adjustment.Supplied with safety pins for height adjustment Also includes mounting fixtures for up to 12 lighting effects

Read more less

Top cap suitable for use with most lighting stands permitting the use of T-bars single fixtures and other attachments. 38mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring and plain washers 40kg maximum load (evenly distributed)

Read more less

Extendable speaker pole steel black with M20 screw thread. Height: 84 cm - 112 cm

Read more less

Designed to quickly mount a light effect to a 2" (52mm) truss and allow the light to be rotated 360. The clamp features a narrow body for use within the "V" of truss diagonals. Clamps the full diameter of the bar to stop slippage and leaves it in unmarked condition

Read more less

Designed to quickly mount a light effect to a lighting stand and allow the light to be rotated 360 degrees. This revolutionary design quickly converts this 2inch (52mm) clamp into 2 other sizes. Clamps the full diameter of the bar to stop slippage and leaves it in unmarked condition.

Read more less

Strong metal G clamp designed for hanging lighting effects. Fits on bars up to 25mm diameter.

Read more less

Reloop Stand Hub Pro - Laptop Stand with Integrated Docking Station The Reloop Stand Hub Pro is a versatile and portable laptop stand with an integrated 10-port docking station, designed to enhance your workflow and connectivity whether you're a DJ, producer, musician, or content creator. Its foldable design, lightweight aluminum construction, and comprehensive connectivity options make it an ideal solution for both studio and mobile setups.    Key Features Foldable and Adjustable:Fold-flat design for easy transport and storage.   360-degree rotatable base allows for various stand positions, including standard and "Z" configurations.   10-Port Docking Station:Expand your connectivity with:2 x USB-A ports3 x USB-C ports (including 1 x power delivery and 1 x host port)1 x HDMI port   1 x RJ45 Ethernet port   1 x SD card slot   1 x Micro SD card slot   Lightweight and Portable:Made from durable yet lightweight aluminum for easy transport.   Includes a carry bag for protection.    Technical Specifications Material: AluminumCompatibility: Laptops up to 17 inchesDimensions (Folded): 400 x 290 x 35 mm (15.7" x 11.4" x 1.4")Weight: 1.6 kg (3.5 lbs) What's in the box Reloop Stand Hub ProCarry bag  

Read more less

This professional speaker stand from QTX has a sleek design and features a large steel square base ensuring maximum stability and adjustable height of up to 182cm. The 48x48cm base plate has four rubber feet to protect flooring two insert holes to tidy cables underneath the stand and integrated carry handles for easy transportation. The stand is assembled using a 10mm bolt which screws upwards from under the base plate into mounting pole. Adjust the height of the stand using the hand fastener and safety pin. This stand is recommended for use with a speaker or single lighting effect of up to 20kg. Large steel square base Adjustable height of up to 182cm 35mm pole Base features rubber feet cable insert holes and integrated carry handles Supports a speaker or single lighting effect of up to 20kg

Read more less

Stable combination of aluminium and steel lighting stand on a foldable tripod with quick fix height. Supplied with a T-Bar and fixing wing nuts for your lighting fixtures.Quick and easy to setup Ideal for small light fixtures

Read more less

A robust steel stand with lockable height adjustment that can support large speakers with 35mm top hats. Height adjustable from 1.0m to 1.8m. Max. weight load: 50kg. Height adjustable from 1.0m to 1.8m 35mm pole Maximum load 50kg

Read more less

A desktop microphone stand with foldable tripod legs offering easy installation and convenient storage. Ideal for conference and studio use.Ā Supplied with 38" to 58" thread adaptor and 58" mic holder Rubber feet aid stability Adjustable height

Read more less

Special screw clamp for lighting fixtures. "G" shaped for universal applications. Fits on poles up to 55mm.

Read more less

Pioneer DJ DJC-STS1: Your Go-To DJ Stand The Pioneer DJC-STS1 is a sturdy surface mount stand designed to improve comfort and workflow in the DJ booth. It's ideal for holding Pioneer DJ add-on controllers like the DDJ-XP1, DDJ-XP2, or the RMX-1000 remix station, as well as laptops, at an optimal height during performances. Key Features Sturdy DJ Stand: Provides a stable platform for your gear.Optimal Height Adjustment: Adjustable to 6 different heights for improved comfort and workflow.Versatile Compatibility: Perfect for DDJ-XP1, DDJ-XP2, RMX-1000, or laptops.Black Finish: Sleek design to match your DJ setup. Technical Specifications External dimensions when folded (W x D x H): 340 mm x 357.3 mm x 97 mmMaximum dimensions in use (Top panel: horizontal, Height adjustment: minimum position) (W x D x H): 340 mm x 263.5 mm x 260 mmTop panel (W x D): 340 mm x 240 mmTop panel height (in case of horizontal 0 degree): 235 mm, 250 mm, 265 mm, 280 mm, 295 mm and 310 mm (adjustable to 6 heights)Bottom panel (W x D): 260 mm x 240 mmWeight: 3.7 kg Suitable For DJs using Pioneer DDJ-XP1, DDJ-XP2, or RMX-1000.DJs using laptops in their performance setup.Anyone looking to improve ergonomics and organization in the DJ booth. What's in the box Pioneer DJ DJC-STS1 Surface Mount Stand Efficient Design for DJs The Pioneer DJ DJC-STS1 is specifically designed for DJs who need a reliable and efficient stand. It accommodates various DJ gear, so you can set up your equipment quickly and easily. Whether you're at home or performing live, this stand provides the stability you require. Its lightweight construction enables portability, making it easy to transport wherever your gig takes you. Durability Meets Style Constructed from high-quality materials, the DJC-STS1 is not only durable but also stylish. It can withstand the rigors of transport and regular use while maintaining a sleek appearance. DJs can rely on the stand's robust design to keep their equipment safe, so they can focus on their performance without worrying about gear stability. However, the stand does not compromise on aesthetics, ensuring you look professional on stage. Adjustable Features for Customization The adjustable height of the Pioneer DJ DJC-STS1 makes it customizable for any user. You can modify it to your preferred level, resulting in improved comfort and ergonomics while performing. This feature is essential for long sets where comfort is paramount. Additionally, the stand's versatility allows it to be used for different types of equipment, because DJs can seamlessly switch between setups on the fly.

Read more less

The Novopro wrap around scrims stretch around the outside of standard sized DJ booths setup in minutes and give a professional finish at your venue. Available in either black (Novopro WAS1B) or in white scrim finish (Novopro WAS1W) these scrim covers have an elasticated edge and two tie points to allow extra fixing to your DJ boothconsole. Manufactured from a double stitched elasticated material that allows the scrim to stretch around the table they create a material finish that can either be used to blackout or be illuminated for some creative effects. The WAS1 is designed to fit the Novopro SDX booths but due to being manufactured from an elasticated material they will fit many other DJ booths and products that are approx. 2500-2900mm total width and 1100-1250mm in height. Novopro scrim ranges are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.

Read more less

The Novopro Table scrims stretch around standard sized tables setup in minutes and give you a professional finish at your venue.Ā Available in 4ft and 6ft sizes and either black or white finishes the Novopro TSCRIMs will solve your table scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim to stretch around the table they create a material finish that can either be used to blackout or be illuminated for some creative effects. The TSCRIM4ftW (white) and TSCRIM4ftB (black) are designed to fit a standard 4ft table of 122cm wide 7075cm high and 61cm deep - however due to the elasticated nature of the fabric tables of slightly differing sizes will also be accommodated. The TSCRIM6fW (white) and TSCRIM6ftB (black) are designed to fit a standard 6ft table of 180cm wide 7075cm high and 76cm deep - however due to the elasticated nature of the fabric tables of slightly differing sizes will also be accommodated. Convenient cable access points on the front edge of the scrim (two fitted points on the 4ft scrim and three fitted points on the 6ft scrim) and stitched-in pockets that fit around and under the table legs to secure the scrim into place. The shaped rear panel allows convenient access underneath the table. Novopro TSCRIM ranges are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.

Read more less

Speaker stand adapter which allows mounting to a square section or tubular bar. Ā To be used with the BAR1 to create a lighting bar which can hold up to a maximum of 8 light effects. Ā

Read more less

The Novopro STP (Scrim Truss Podium) socks are placed around your truss podiums or lecterns to give you that professional scrim appearance.ĀĀ Available in 1m and 2m lengths small or larger truss sizes with or without velcro and in either black or white scrim finishes the STP range will solve your scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim sock to stretch around the metalwork they create a material finish that can either be used to blackout or be illuminated for some creative effects. Standard scrim versions are installed by simply placing over your truss. The V (for velcro) versions have male and female velcro along the long edge so that they can be fitted around a podium or lectern where it is not easy to slide scrim over the unit or fitted to truss where you wish to add scrims after a truss structure has already been assembled. STP100 series will fit truss that has an outer perimeter of 520mm to 850mm including Trilite 100 series tri quad truss and 200 series tri truss along with small to medium sized trussing from other manufacturers. STP200 series will fit truss that has an outer perimeter of 850mm to 1300mm including Trilite 200 series quad 18+ truss along with medium to large sized trussing from other manufacturers. The Novopro STP range are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.

Read more less

The Novopro STP (Scrim Truss Podium) socks are placed around your truss podiums or lecterns to give you that professional scrim appearance. Available in 1m and 2m lengths small or larger truss sizes with or without velcro and in either black or white scrim finishes the STP range will solve your scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim sock to stretch around the metalwork they create a material finish that can either be used to blackout or be illuminated for some creative effects. Standard scrim versions are installed by simply placing over your truss. The V (for velcro) versions have male and female velcro along the long edge so that they can be fitted around a podium or lectern where it is not easy to slide scrim over the unit or fitted to truss where you wish to add scrims after a truss structure has already been assembled. STP100 series will fit truss that has an outer perimeter of 520mm to 850mm including Trilite 100 series tri quad truss and 200 series tri truss along with small to medium sized trussing from other manufacturers. STP200 series will fit truss that has an outer perimeter of 850mm to 1300mm including Trilite 200 series quad 18+ truss along with medium to large sized trussing from other manufacturers. The Novopro STP range are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.

Read more less

The Novopro STP (Scrim Truss Podium) socks are placed around your truss podiums or lecterns to give you that professional scrim appearance.Ā Available in 1m and 2m lengths small or larger truss sizes with or without velcro and in either black or white scrim finishes the STP range will solve your scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim sock to stretch around the metalwork they create a material finish that can either be used to blackout or be illuminated for some creative effects. Standard scrim versions are installed by simply placing over your truss. The V (for velcro) versions have male and female velcro along the long edge so that they can be fitted around a podium or lectern where it is not easy to slide scrim over the unit or fitted to truss where you wish to add scrims after a truss structure has already been assembled. STP100 series will fit truss that has an outer perimeter of 520mm to 850mm including Trilite 100 series tri quad truss and 200 series tri truss along with small to medium sized trussing from other manufacturers. STP200 series will fit truss that has an outer perimeter of 850mm to 1300mm including Trilite 200 series quad 18+ truss along with medium to large sized trussing from other manufacturers. The Novopro STP range are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag. Ā

Read more less

The Novopro STP (Scrim Truss Podium) socks are placed around your truss podiums or lecterns to give you that professional scrim appearance. Available in 1m and 2m lengths small or larger truss sizes with or without velcro and in either black or white scrim finishes the STP range will solve your scrim requirements. Manufactured from a double stitched elasticated material that allows the scrim sock to stretch around the metalwork they create a material finish that can either be used to blackout or be illuminated for some creative effects. Standard scrim versions are installed by simply placing over your truss. The V (for velcro) versions have male and female velcro along the long edge so that they can be fitted around a podium or lectern where it is not easy to slide scrim over the unit or fitted to truss where you wish to add scrims after a truss structure has already been assembled. STP100 series will fit truss that has an outer perimeter of 520mm to 850mm including Trilite 100 series tri quad truss and 200 series tri truss along with small to medium sized trussing from other manufacturers. STP200 series will fit truss that has an outer perimeter of 850mm to 1300mm including Trilite 200 series quad 18+ truss along with medium to large sized trussing from other manufacturers. The Novopro STP range are treated with a fire retardant finish (which must be re-applied after hand or machine washing) and come with a convenient drawstring carry bag.

Read more less

White double sided triangular scrim that will fit either a speaker or lighting stand. Gives your setup a cost effective and more professional appearance. Can be used for decorative and rear illumination effects or used to simply hide any untidy cables. Unique and practical Novopro design with velcro holding the top of the scrim in place - 3 x self adhesive Velcro strips are supplied (two are spares) Edges fit around and under the feet of your stand. The scrim stretches and has elasticated edges for a tensioned fit. Carry bag included. Machine washable at 30 degrees. (a suitable fire retardant spray must be re-applied after washing)

Read more less