novopro

Novopro accessory shelf bracket (pair) Shelf support kit for external equipment Professional and universal accessory shelf for use on the SDX booth and other stands Suitable for laptop controller CD mixer or any other equipment up to 10kgs Clamp suitable for rectangular tube from 17mm-25mm Three adjustable depths Height:29cm Depth:30.5cm Pair packing:32*6*10CM Load capacity: 10kgs Net Weight:Ā 0.93KGS *please note this now ships with a shorter bolt than the one shown in the image*

Read more less

Extremely well engineered speaker pole Auto-lock ratchet systemĀ All metal pole construction Fits into the industry standard 35mm top pole for universal compatibility Fits into the industry standard 35mm bottom pole mounting for universal compatibility Height: 880mm 1330mm 34.6 inches Maximum load: 60Kg 132lb Material: 35mm 1.37 inches aluminum pole and steel outer pole Surface and colour: black powder coated Weight: 1.05Kg 2lb 5oz Ā The Novopro ASP2 speaker pole has been designed for ease of use as well as safety. The pole has an integral auto-lock ratchet system which allows you to adjust the height and lock the pole to that height without the usual slipping and hassle of standard speaker poles. Ā Kit includes the following: 1 x ASP2 speaker pole 1 x instruction manual

Read more less

The BAR1 is an additionalreplacement 1m lighting pole with fixings. To be used with the Novopro TOP1 to form a lighting bar on a speaker stand. Ideal for mobile use - lightweight robust and easily holds 20kg+ of evenly distributed weight. Allows you to add up to 8 fixings (top + bottom) so that you can fixmount your lights securely to this bar. Manufactured in 30mm box section steel with a black powdercoat finish and 1m long with plastic protective end caps.

Read more less

High quality wireless bodypack microphone system for speakers presenters aerobics and general fitnesstraining use.Supplied with transmitter tie cliplapel microphone (with removable 'anti-pop' foam windshield cover)Ā and headset microphone - both with a screw in locking connection system.

Read more less

Novopro CDJ Dual Table Stand Fully adjustable universal twin CD stand Heavy duty professional CDJ stand Suitable for two CDJs or other equipment Adjustable tray height and leftright angle adjustable Trays tilt down at different angles and set with locking pin The trays are depth and width adjustable to fit most players in the market Equipment protection with the supplied rubber pads Large and sturdy metal base Tray size: Width:30.5cmĀĀ Depth: from 35 cm to 45.7 cmĀ Max Height:50.5cm Base size: Width:41.5cmĀĀ Depth:47.7cm Net Weight:9.9kgs

Read more less

The Novopro CDJ WS1 is a fully adjustable combination stand for holding your CDJs Mixer and a laptop. The Novopro WS1 workstation is suited for use in home studios by mobile DJs or installation into a venue. Powder coated black finish to the sturdy steel constructed frame. Foam EVA pads protect and isolate the base of your equipment and rubber strip edging around the top panel of the Novopro WS1 will stop any marking your CDJs or laptop etc. Fully adjustable in depth and angle the top shelf adjusts exactly to your requirements. Top plate dimensions: 115cm wide x 44cm deep Bottom plate dimensions:Ā 44cm x 44cm Includes rubber feet and cable management ties

Read more less

Weighted desktop microphone holder. ABS injection moulded base and mic clip. Flexible clip for universal fitment to handheld microphones. Designed to have a wider clip than standard holders so will hold larger diameter handheld wireless microphones. Ā

Read more less

The DJS1 BLACK is the perfect solution to screen your equipment and give a professional appearance to your set-up.Ā Novopro's unique extending folding hinges enable the DJS1 screen to be set up or packed away within seconds. This saves you valuable time at your event - no messing around with the locating pins or clips used on other DJ screens.... This sturdy screenfacade is manufactured from box steel sections with solid welded construction points giving you a robust yet lightweight frame. Each of the four panels are 700mm wide x 1200mm high and the DJS1 weighs in at a manageable 13 kg. The four white elacticated scrim panels allow for rear projection which can be backlit using any lighting source. The panels attach by velcro to the booth and are made from a machine washable and flame retardant material. Spare scrim panels are available individually in either white or black. The DJS1 has a black powdercoated paint finish (a white powdercoat version is also available) and comes complete with a zipped carry bag for easy storage and transportation. A full range of brackets and other accessories are available so the DJS1 can be customised to your individual requirements. The DJS1 is designed and engineered in the UK by working performers.

Read more less

Foldable design for extremely easy transportation and storage Super lightweight white powder coated aluminum frame construction Innovative hinges allow each panel to rotate 360 degrees for custom positioning Extremely easy and quick setupWashable fire retardant and easy-to-attach scrim Includes a carry bag to store and keep the screen and scrims clean Fast and easy setup instructions - Allen key supplied Height: 1200mm 47.24 inches Width (each panel): 700mm 27.55 inches Frame material: aluminum Surface and colour: white powder coated Weight: 5.4Kg 11lb 14 oz

Read more less

Universal clamp mount for topbar mounting Universal 'G' clamp in a black finish Steel construction For use with the Novopro SDX booth or most tubes Suitable for tube diameters from 25mm to 50mm Load capacity: 15kgs+ Net Weight: 0.2kgs Dimensions: 133mm x 86mm x 18mm

Read more less

Heavy duty larger base plate set for the PS1XL or PS1XXL plus premium grade transport bag A set of 2 larger base plates for the Novopro PS1XL or PS1XXL stands* Bigger plates for even more stability at extended heights Supplied with a premium bag to house and transport both plates 2 x plates plus 1 x bag per set to fit a pair of PS1XL or PS1XXL stands Premium quality bag is designed to protect the plates from the rigours of the road Pocket is included on the bag for holding accessories and bolts The bag is padded for added protection Strong stitching and a high quality zip Padded handle grip for comfort Heavy duty webbing handle that wraps around the whole bag for added support Premium black finish Base plate (WxDxH): 650 x 625mm 25.5 x 24.5 inches * Novopro PS1XL or PS1XXL obviously not included Each HDPLATESET-PS1XL-XXL includes the following: 2 x heavy duty base plates 1 x premium bag for both plates

Read more less

Novopro iPadtablet bracket 1 Universal mounting bracket for your iPad tablet Universal tablet mount - designed for the SDX booth but will fit most stands in the market. Suitable for all generations of iPad and other similar size tablets Universal clamp system suitable for tubes with a diameter of 10mm to 35mm 360 degree roatation and 15 degrees tilt down and up Special locking system to ensure the tablet stays at the desired position Ā Tablet mount size: Width:Ā from 11Ā to 14.7CM Height:Ā from 14.5Ā to 25.5CM Depth:Ā from 2.5Ā to 4CM Net Weight: 0.4KGS Ā EANGS1: 5060293211861

Read more less

Novopro LAP laptop table stand Universal twin shelf stand system Professional laptop and accessories stand With two trays for two laptops or one laptop and other equipment Easy assembly Tray height and angle are fully adjustable Tray width and depth are fully adjustable Max height: 39.5cm Tray depth: 28cm Tray width adjustable from 13cm to 22.5cm Base size: Width: 38 cmĀ Depth:25 cm

Read more less

Universal laptop accessories shelf for larger laptops or other equipment. Twin clamp system suitable for mounting the Novopro Laptop Tray 2 onto vertical tube that has a diameter of 15mm to 50mm. Cantilever main support arm that enables fully adjustable tray positioning. The tray has a selectable tilt adjustment with a secure bolt locking system. Flip-up metal bracket at the front of the tray to prevent your laptop or equipment from sliding forwards. Supplied with self-adhesive foam backed pads to protect the pole it is mounted onto. 'V' shaped clamp mounting system with foam pad covered screw bolts to attach to an upright pole. Tray size:Ā 442mm wide x 345mm deep. Net Weight: 3.5 Kgs

Read more less

A solid robust and adaptable circular bracket solution for your lighting display 32 possible mounting points for wide angle lighting dispersion Includes all thumb screws neededĀ All metal bracket construction Fits onto an industry standard 35mm stand or pole for universal compatibility Tilt adjustment mechanism to angle the whole bracket Can be rotated 360 degrees on your stand then tightened into position Bracket dimensions (WxDxH): 800 x 800 x 318mm 31.5 x 31.5 x 12.5 inches Maximum load: 28Kg 61lb of evenly distributed weight Material: 32mm 1.25 inches steel round tube and 35mm 1.37 inches standard pole mount Surface and colour: black powder coated Weight: 3.9Kg 8lb 9oz Ā Kit includes the following: LIBRA1 round lighting bracket Male female thumb screws Instruction manual

Read more less

A solid robust and adaptable square bracket solution for your lighting displayĀ 32 possible mounting points for wide angle lighting dispersion Includes all thumb screws needed All metal bracket construction Fits onto an industry standard 35mm stand or pole for universal compatibility Tilt adjustment mechanism to angle the whole bracket Can be rotated 360 degrees on your stand then tightened into position Bracket dimensions (WxDxH): 800 x 800 x 318mm 31.5 x 31.5 x 12.5 inches Maximum load: 28Kg 61lb of evenly distributed weight Material: 35mm 1.37 inches steel square tube and 35mm 1.37 inches standard pole mount Surface and colour: black powder coated Weight: 5.5Kg 12lb 2oz Ā The Novopro LIBRA2 lighting bracket is a new and innovative lighting display solution that has been designed for ease of use as well as safety. Kit includes the following: LIBRA2 square lighting bracket Male female thumb screws Instruction manual Ā Ā Ā Ā

Read more less

Premium grade lighting stand - engineered to a high standard Telescopic T-bar for wide angle lighting dispersion 8 x integral lighting fixture points with thumb screws included All metal stand construction Up to 3 metre stand height Uses the industry standard 35mm top pole for universal compatibility Stand height: 1900mm 3000mm 74.8 118 inches T-Bar width: 1500mm 2280mm 59 89.7 inches Maximum load: 30Kg 66lb (60Kg 132lb for the main stand but a 30Kg 66lb limit for the T-Bar section) Material: 35mm 1.37 inches aluminum pole and steel legs Surface and colour: black powder coated Weight: 8.5Kg 18lb 11oz Ā The Novopro LIG300 lighting stand has been designed for ease of use as well as safety. The stand has the patented auto-lock ratchet and air cushioning system which allows you to adjust the height and lock the stand to that height without the usual slipping and inconvenience of standard lighting stands. Ā Kit includes the following: LIG300 lighting stand LIG300 telescopic T-bar Male female thumb screws Instruction manual

Read more less

Novopro LS20 laptop stand and bag High quality and affordable portable laptop stand ProducerDJ laptop stand Solid steel structure Quick open and fold system With a second tray for soundcard or IO device Thin small and lightweight but built for the rigors of the road With carry bag for storage Open size:26.5*26*29.5CM Foldedclosed size: 26*29.5*2.5CM Net Weight:1.36 Kgs Ā EANGS1: 5060293211823

Read more less

Professional grade fully adjustable and highly adaptable laptop iPad tablet stand for club production and DJ use either out on the road or within the studio and home environment. The LS22M is very versatile - fully adjustable and customisable to your specific needs. The ergonomically designed top tray gives maximum airflow around your laptop whilst rotating a full 360 degrees and with 2 selectable tilt angles. The bottom base and the top plate both flip around and lock into place to enable the Z shaped positioning. Rotating the locking and extending arm assembly adjusts the stand in height from 290mm to 410mm. (225mm to 310mm high when in the Z position) The sturdy and robust metal chassis has a durable black powdercoated finish its built for the rigors of the road The LS22M features push button spring loaded locating pins that give solid locking positions in use but also enables fast folding and flatpacking at the end of your session. Fitted with non-slip feet and protective rubber cover caps to protect your valuable equipment.Ā Supplied with zipped Novopro carry bag for easy transportation.

Read more less

Professional grade fully adjustable and highly adaptable laptop iPad tablet stand for club production and DJ use either out on the road or within the studio and home environment.Ā The LS22M is very versatile - fully adjustable and customisable to your specific needs. The ergonomically designed top tray gives maximum airflow around your laptop whilst rotating a full 360 degrees and with 2 selectable tilt angles. The bottom base and the top plate both flip around and lock into place to enable the Z shaped positioning. Rotating the locking and extending arm assembly adjusts the stand in height from 290mm to 410mm. (225mm to 310mm high when in the Z position) Ā Ā The sturdy and robust metal chassis has a durable black powdercoated finish its built for the rigors of the road The LS22M features push button spring loaded locating pins that give solid locking positions in use but also enables fast folding and flatpacking at the end of your session. Ā Ā Fitted with non-slip feet and protective rubber cover caps to protect your valuable equipment.Ā Supplied with zipped Novopro carry bag for easy transportation. Ā Ā The fully open size is expandable from 295mm W x 270mm D x 290mm H up to 295mm W x 270mm D x 410mm H (when fully height extended) Ā Ā The foldedclosed size is 295mm W x 270mm D x 40mm H Ā Ā

Read more less

Professional grade fully adjustable and highly adaptable laptop iPad tablet stand for club production and DJ use either out on the road or within the studio and home environment.The LS22M is very versatile - fully adjustable and customisable to your specific needs. The ergonomically designed top tray gives maximum airflow around your laptop whilst rotating a full 360 degrees and with 2 selectable tilt angles. The bottom base and the top plate both flip around and lock into place to enable the Z shaped positioning. Rotating the locking and extending arm assembly adjusts the stand in height from 290mm to 410mm. (225mm to 310mm high when in the Z position) The sturdy and robust metal chassis has a durable black powdercoated finish its built for the rigors of the road The LS22M features push button spring loaded locating pins that give solid locking positions in use but also enables fast folding and flatpacking at the end of your session. Fitted with non-slip feet and protective rubber cover caps to protect your valuable equipment.Ā Supplied with zipped Novopro carry bag for easy transportation. The fully open size is expandable from 295mm W x 270mm D x 290mm H up to 295mm W x 270mm D x 410mm H (when fully height extended) The foldedclosed size is 295mm W x 270mm D x 40mm H

Read more less

Novopro LS25 Pro laptop stand and bag Professional Alloy laptop stand Deluxe professional producerDJ laptop stand Aluminum alloy structure Quick open and fold system With a second tray for soundcard or IO device Thin small and lightweight but built for the rigors of the road With a carry bag for storage and transportantion Open size:26.5*22.7*30CM Foldedclosed size: 30*26.5*2.5CM Net Weight: 1.07Kgs

Read more less

This practical headphone holder is designed to mount onto a round or square vertical pole and provide easy access and storage for your headphones. The Novopro NHH1 weighs 0.8kg and fits onto any vertical pole with a diameter between 5mm and 22mm. Non-slip foam covers the resting area to protect your valuable headphones from damage and keep them in place on the holder. TheĀ perfect solution to ensure your headphones are always within easy reach

Read more less

Replacement top and base plate set for the PS1XL or PS1XXL plus transport bag A set of 2 plates for the Novopro PS1XL or PS1XXL stands* 1 x top plate plus 1 x base plate Supplied with a standard cloth bag to house and transport both plates 2 x plates plus 1 x bag per set Carry bag to protect the plates from the rigours of the road Black finish bag Top plate (WxDxH): 300 x 300 x 3mm 11.8 x 11.8 x 0.11 inches Base plate (WxDxH): 500 x 500 x 3mm 19.6 x 19.6 x 0.11 inches * Novopro PS1XL or PS1XXL obviously not included Each PLATESET-PS1XL-XXL includes the following: 1 x top plate 1 x base plate 1 x carry bag for both plates

Read more less