Every DJ needs Cases, Bags and Coffins to transport DJ equipment safely . DJKIT® could save you big stresses and major pounds with the DJKIT® Flight Cases and Bags range.
Flight Cases & Bags
Electro-Voice EV Everse 12 Rain Cover
Electro-Voice EV Everse 12 Rain Cover The Electro-Voice Everse 12 Rain Cover is a protective accessory designed specifically for the Everse 12 loudspeaker. It provides weather resistance with an IP44 rating, safeguarding the speaker from light rain and splashes during temporary outdoor use. The cover is not intended for prolonged exposure to moisture, saltwater, or chlorine environments. Featuring a custom fit, it includes a bottom flap for tripod mounting and a handle pocket for easy transport, making it ideal for outdoor events where weather protection is needed. Weatherisation When the rain cover is installed, the EVERSE 12 loudspeaker is designed to be weather resistant to IP44 standards but not waterproof. IP44-rated rain cover Includes a bottom flap for tripod position with the cover. The cover incorporates a handle pocket on both the top and side to facilitate carrying the speaker. Drain holes at the bottom allow kickback orientation. The rain cover includes an amplifier input pocket for the use of cables. Key features: Product Name: EVERSE 12 Rain Cover Purpose: Designed to protect the EVERSE 12 loudspeaker from light rain, splashes, and damp environments IP Rating: IP44 (protection against water splashes from any direction) when installed on the EVERSE 12 in upright or kickback orientations Material: Durable, weather-resistant fabric (specific material not detailed, but typical for such covers) Usage: Intended for temporary use in wet or damp environments; not for continuous exposure to moisture or submersion Orientation Compatibility: Rated for IP44 only in upright and kickback positions; not for use in monitor (sideways) position Design Features: Bottom flap for tripod mounting, allowing the speaker to be used on a stand while covered Top and side handle pockets for easy carrying with the cover on Drain holes at the bottom to prevent water pooling in kickback orientation Amplifier input pocket for cable access while the cover is installed Weather Resistance: Enhances the EVERSE 12’s weather resistance but does not make it fully waterproof Installation: Easy to install and remove, with access to speaker handles for transportation Colour: Black Dimensions: Custom-fit for the EVERSE 12 loudspeaker Additional Notes: Not suitable for exposure to salt water, chlorine, or high-chlorine environments The weatherised input cover is optional when using the rain cover to achieve the IP44 rating Product-related questions and answers: Q: Does the rain cover affect the sound quality of the EVERSE 12 speaker?A: No, the cover is designed to protect the speaker without significantly impacting sound quality. The material is acoustically transparent enough to allow clear audio output while providing weather protection. Q: Can I use the EVERSE 12 Rain Cover with other speaker models?A: No, the rain cover is custom-designed specifically for the EVERSE 12 loudspeaker and may not fit other models properly, which could reduce its protective capabilities. Q: How do I install the rain cover on the EVERSE 12?A: The cover slips over the speaker and secures with a bottom flap for tripod use. It includes pockets for the handles and an input pocket for cable access. Detailed instructions are provided in the Quick User Guide. Q: Is the EVERSE 12 completely waterproof with the rain cover installed?A: No, the cover provides IP44-rated protection, which guards against light rain and splashes but is not designed for heavy rain, submersion, or continuous moisture exposure. Q: Can I leave the rain cover on the speaker during storage?A: Yes, but ensure both the speaker and cover are dry before long-term storage to prevent moisture buildup. The cover is intended for temporary use in wet conditions. Q: Does the cover protect the speaker from dust and dirt as well? matièresA: Yes, the IP44 rating also provides some protection against dust ingress, making it suitable for outdoor environments with light dust or dirt. Q: Can I use the speaker on a tripod with the rain cover installed?A: Yes, the cover includes a bottom flap specifically designed for tripod mounting, allowing you to use the speaker on a stand while protected. Q: Is the rain cover machine washable?A: The product page does not specify, but similar covers are typically hand-washable with mild soap and water. Avoid machine washing to prevent damage. Q: Will the cover fit if I have other accessories attached to the speaker?A: The cover is designed to fit the EVERSE 12 in its standard configuration. Additional accessories may affect the fit, so it’s best to remove them before installing the cover. Q: How does the rain cover handle water drainage?A: The cover has drain holes at the bottom to allow water to escape, especially when the speaker is in the kickback position, preventing pooling inside the cover.
£109.00
Electro-Voice EVOLVE 50- Speaker Pole Short
Column speaker pole short black for Evolve 50Ā
£99.00
Electro-Voice EVOLVE 50 Rolling Case
Case forĀElectro-Voice EVOLVE 50ĀWith Wheels For SubĀ
£215.00
Electro-Voice ZXA1 Speaker Cover
Electro-Voice ZXA1 Speaker Cover The Electro-Voice Speaker Cover is designed to accommodate either the ZX1 or the ZXA1 loudspeakers. Featuring a durable and padded design, the Electro-Voice Speaker Cover is perfect for protecting your speaker during set breakdown and transport. Key features: · Product name: Electro-Voice ZXA1 Speaker Cover · Compatibility: Designed for Electro-Voice ZX1 and ZXA1 speakers · Material: Constructed from heavy-duty nylon · Interior: Padded lining for added protection · Design: Custom-fitted to securely cover ZX1 and ZXA1 speaker models · Handle access: Features openings for speaker handles, allowing easy transport without removing the cover · Branding: Embroidered with the Electro-Voice (EV) logo · Purpose: Protects speakers from scratches, scuffs, and minor impacts during storage or transport · Colour: Black with a white embroidered EV logo · Durability: Built to preserve the speaker’s appearance and performance over time · Price: £55.00 (subject to change based on stock and promotions) · Stock status: Availability indicated as "In stock" (subject to change without prior notice) Highlights: · Tailored fit: Specifically designed for ZX1 and ZXA1 speakers, ensuring a snug and secure fit · Protective padding: Heavy-duty nylon exterior with padded interior safeguards against wear and tear · Ease of use: Handle openings provide convenient access for carrying without uncovering the speaker · Branded aesthetic: The EV logo adds a professional and stylish touch to your gear User feedback: Praised for its durability and perfect fit, though some users note it lacks full bottom coverage Product-related questions and answers: Q: Will this cover fit other Electro-Voice speakers, like the ZLX-12P or ZXA1-Sub?A: No, the ZXA1 Speaker Cover is designed specifically for the ZX1 and ZXA1 models. It won’t fit other speakers like the ZLX-12P or ZXA1-Sub due to differences in dimensions and shape. Check DJKit for model-specific covers, such as the ZLX12-CVR or ZXA1-SUB-CVR. Q: Does the cover protect the entire speaker, including the bottom?A: The cover protects the sides, top, and front but does not fully enclose the bottom. It’s designed to slide over the speaker, leaving the base (feet or pole mount area) exposed for easy fitting. Q: Is this cover durable enough for frequent transport?A: Yes, the heavy-duty nylon and padded interior make it suitable for regular transport. Users report it effectively prevents scratches and minor bumps, though it may shift slightly if the speaker is turned upside down or laid on its side. Q: Is the cover waterproof or weather-resistant?A: The product description doesn’t indicate waterproofing or weather resistance. It’s intended for physical protection (e.g., scratches, impacts) rather than weather protection. For outdoor use, consider additional weatherproofing solutions. Q: Can I leave the cover on while the speaker is in use?A: No, the cover is designed for storage and transport only. It covers the speaker’s grille and ports, which would obstruct sound and ventilation if left on during operation. Q: How easy is it to put on and remove the cover?A: The cover slides on and off via an open bottom, which users find simple to manage. Its custom fit ensures it stays in place, though slight effort may be needed to align it properly. Q: Will this protect my speaker from drops or heavy damage?A: The padded cover offers protection against minor impacts and scratches but isn’t built to withstand drops or significant damage. For greater protection, a hard case is recommended. Q: How does this compare to generic speaker covers?A: The ZXA1 Speaker Cover is custom-made for ZX1 and ZXA1 models, offering a precise fit and handle access that generic covers may lack. Its padded nylon construction and branding also suggest higher quality, though it’s priced at £55.00, which is more than some universal alternatives.
£55.20
Electro-Voice EKX-15-CVR
Electro-Voice EKX-15-CVR Electro-Voice EKX-15-CVR Padded Cover for EKX Series EKX-15 Protect your investment. The EKX-15-CVR is designed specifically for the Electro-Voice EKX-15 speaker. Featuring custom-fitted heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help to keep your EKX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Purpose: Designed specifically to protect the Electro-Voice EKX-15 speaker. · Compatibility: Custom-fitted for the EKX-15 and EKX-15P speaker models. · Material: Heavy-duty nylon construction for durability and resistance to wear. · Padding: Features a padded interior to safeguard the speaker from scratches, dings, and minor impacts. · Design: Includes reinforced openings for each handle on the speaker cabinet, allowing for easy transport while covered. · Branding: Proudly emblazoned with the EV (Electro-Voice) logo for a professional look. · Protection: Helps keep the EKX-15 speaker looking and sounding great by shielding it during storage or transport. · Stock status: Listed as "In stock" (subject to change without prior notice). · Delivery options: Eligible for free next working day delivery on orders over £100 placed before 3:30pm Monday to Friday (UK mainland only; excludes weekends and Bank Holidays). · Finance option: Available for purchase through financing (details available on the site). Product-related questions and answers: Q: Will this cover fit other Electro-Voice speaker models? A: No, the EKX-15-CVR is custom-fitted specifically for the EKX-15 and EKX-15P models. It may not fit other models properly due to differences in size and shape. Q: Is the cover waterproof? A: The cover is made of heavy-duty nylon, which offers some resistance to moisture, but it is not explicitly advertised as waterproof. It’s best to avoid prolonged exposure to heavy rain or submersion. Q: Can I use the speaker while it’s inside the cover? A: No, this cover is designed for storage and transport, not for use during operation. It lacks openings for sound output and could muffle or distort the audio if left on during use. Q: How durable is the padding inside the cover? A: The padded interior is designed to protect against minor impacts and scratches. While it’s not specified as heavy-duty padding, it’s sufficient for typical transport and storage needs. Q: Does the cover have a carrying strap or handle? A: The cover itself does not have a separate strap or handle, but it features reinforced openings that align with the speaker’s handles, allowing you to carry the speaker comfortably while it’s covered. Q: Is this cover worth the investment if I only use my speaker indoors? A: If you rarely transport your speaker and it stays in a safe indoor environment, you might not need the cover. However, it’s still useful for dust protection and preventing accidental bumps during storage. Q: How easy is it to put the cover on and take it off? A: The custom-fitted design ensures a snug fit, making it straightforward to slip on and off, especially with the handle openings providing easy access points. Q: Can I get free delivery if I only buy the cover? A: Free next working day delivery applies to orders over £100 placed before 3:30pm (Monday to Friday, UK mainland). If the cover’s price is below £100, you’d need to add more items to qualify, or standard delivery charges will apply.
£79.00
Electro-Voice EKX-12-CVR
Electro-Voice EKX-12-CVR Padded Cover for EKX Series EKX-12 Protect your investment The EKX-12-CVR is designed specifically for the Electro-Voice EKX-12 speaker. Featuring custom-fitted heavy-duty nylon construction padded interior and proudly emblazoned with the EV logo this cover will help to keep your EKX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport.
£69.00
Electro-Voice ZLX15-CVR
Electro-Voice ZLX15-CVR Electro-Voice ZLX15-CVR Padded Cover for ZLX Series ZLX-15P Protect your investment. We specifically designed the ZLX15-CVR for the Electro-Voice ZLX15 PA speaker. Featuring custom-fitted, heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help keep your ZLX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Product name: Electro-Voice ZLX15-CVR Padded Cover · Compatibility: Designed specifically for the Electro-Voice ZLX-15 and ZLX-15P PA speakers · Material: Heavy-duty nylon construction · Interior: Padded for enhanced protection · Design: Custom-fitted to perfectly cover the ZLX-15 series speakers · Handle access: Reinforced openings for each handle on the speaker cabinet, enabling safe transport and storage without removing the cover · Branding: Features the Electro-Voice (EV) logo prominently displayed · Purpose: Protects the speaker from scratches, scuffs, and minor impacts during storage or transport · Durability: Built to maintain the ZLX-15’s appearance and sound quality over time · Price: £75.00 (subject to change based on stock and promotions) · Stock status: Availability indicated as "In stock" (subject to change without prior notice) Highlights: · Perfect fit: Tailored specifically for the ZLX-15 and ZLX-15P, ensuring complete coverage and a secure fit · Protective design: Combines padded interior and durable nylon exterior to shield against every day wear · Practicality: Handle openings allow for easy carrying without sacrificing protection · Professional look: The EV logo adds a sleek, branded aesthetic to your gear User Feedback: Reviews praise the snug fit and protective quality, though some note the lack of bottom coverage as a minor drawback Product-related questions and answers: Q: Will this cover fit other Electro-Voice models, like the ZLX-12P or EKX-15?A: No, the ZLX15-CVR is designed exclusively for the ZLX-15 and ZLX-15P speakers. It won’t fit other models like the ZLX-12P or EKX-15 due to size and shape differences. Check DJKit for model-specific covers, such as the ZLX12-CVR or EKX-15-CVR. Q: Does the cover protect the bottom of the speaker, including the feet or pole mount area?A: The cover does not fully enclose the bottom. It’s open at the base to slide over the speaker, leaving the feet and pole mount exposed. This aids in fitting but limits protection for that area. Q: Is the material sturdy enough for frequent gigging and transport?A: Yes, the heavy-duty nylon and padded interior are built for regular use. Users report it effectively prevents scratches and minor bumps, though it may not stay fully in place if the speaker is laid on its side during transit. Q: Is this cover waterproof or suitable for outdoor use?A: The product description doesn’t mention waterproofing or weather resistance. It’s designed for physical protection rather than weatherproofing, so additional coverage may be needed for outdoor transport or storage. Q: Can I use the speaker with the cover on?A: No, the cover is meant for storage and transport only. It covers the speaker’s grille and ports, which would interfere with sound output and ventilation if left on during use. Q: How easy is it to put the cover on and take it off?A: The cover slides on via an open bottom, which users find straightforward. Its custom fit ensures it stays secure, though aligning it perfectly may take slight effort. Q: Will this protect against drops or heavy impacts?A: The padded cover offers protection against minor impacts and scratches but isn’t designed for significant drops. For robust protection, a hard case would be a better option. Q: Are there colour options available for this cover?A: No other colours are available. Q: How does this compare to generic speaker covers?A: The ZLX15-CVR’s custom fit and handle openings provide a tailored solution that generic covers may not match. Its padded nylon and branding also suggest better quality, though it’s priced higher at £75.00 compared to some universal options
£69.00
Electro-Voice ZLX12-CVR
Electro-Voice ZLX12-CVR Electro-Voice ZLX12-CVR Padded Cover for ZLX Series ZLX-12P Protect your investment. The ZLX12-CVR is designed specifically for the Electro-Voice ZLX12 PA speaker. Featuring custom-fitted heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help to keep your ZLX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Product name: Electro-Voice ZLX12-CVR Padded Cover · Compatibility: Designed specifically for the Electro-Voice ZLX-12 and ZLX-12P PA speakers · Material: Heavy-duty nylon construction · Interior: Padded for added protection · Design: Custom-fitted to snugly cover the ZLX-12 series speakers · Handle access: Reinforced openings for each handle on the speaker cabinet, allowing safe transport and storage without removing the cover · Branding: Proudly emblazoned with the EV (Electro-Voice) logo · Purpose: Protects the speaker from scratches, scuffs, and minor impacts during storage or transport · Additional feature: Includes a Velcro opening at the bottom to assist with sliding the cover on and off · Durability: Built to keep the ZLX-12 looking and sounding great for years · Price: £69.00 (subject to change based on stock and promotions) · Stock status: Availability indicated as "In stock" (subject to change without prior notice) Highlights: · Tailored fit: Ensures full coverage and a secure fit specific to the ZLX-12 and ZLX-12P models · Protection: Padded interior and durable nylon exterior safeguard against wear and tear · Convenience: Handle openings and Velcro flap make it easy to use without compromising accessibility · Aesthetic appeal: Features the iconic EV logo, adding a professional look to your gear · User feedback: Positive reviews highlight its perfect fit, quality construction, and effectiveness in preventing scratches, though some note it may slip slightly during transit if laid on its side Product-related questions and answers: Q: Will this cover fit other Electro-Voice speaker models, like the ZLX-15P or ELX series?A: No, the ZLX12-CVR is specifically designed for the ZLX-12 and ZLX-12P models. It won’t fit other models like the ZLX-15P or ELX series due to differences in size and shape. Check the product page for covers tailored to other models, such as the ZLX15-CVR or ELX118-CVR. Q: Does the cover protect the bottom of the speaker where the feet or pole mount is located?A: The cover does not fully enclose the bottom of the speaker. It has a Velcro opening at the base to slide it on, which leaves the feet and pole mount area exposed. This design aids in fitting but may not offer complete protection for that section. Q: How durable is the material? Can it withstand frequent transport?A: The cover is made of heavy-duty nylon with a padded interior, making it durable for regular storage and transport. Users report it effectively prevents scratches and scuffs, though some mention it may slide up slightly if the speaker is laid on its side during transit. Q: Is this cover weather-resistant or waterproof?A: The product description does not specify weather resistance or waterproofing. It’s designed primarily for physical protection (e.g., scratches, bumps) rather than weather elements. For outdoor use, additional precautions like a waterproof bag might be needed. Q: Can I leave the cover on while using the speaker?A: No, the cover is intended for storage and transport, not for use during operation. It covers the speaker’s front grille and ports, which would muffle sound and block ventilation if left on. Q: Does the cover come with a warranty?A: Contact our customer service team for clarification. Q: How easy is it to put on and take off?A: The cover features a Velcro opening at the bottom, which users say makes it easy to slide on and off. The custom fit ensures it stays snug, though some effort may be needed to align it properly. Q: Will this protect my speaker from major impacts, like drops?A: The padded cover offers basic protection against minor bumps and scratches but isn’t designed to absorb significant impacts like a drop. For heavy-duty protection, consider a hard case. Q: Are there any colour options available?A: No other colour options are available. Q: How does this compare to third-party speaker covers?A: The ZLX12-CVR is custom-made for the ZLX-12 series, ensuring a precise fit and access to handles, which generic third-party covers might lack. Its padded nylon and EV branding also suggest higher quality than some budget alternatives, though it’s pricier at £69.00.
£69.00
Electro-Voice ELX112-CVR
Electro-VoiceĀ ELX112-CVR Padded Cover for ELX Series ELX-112 Protect your investment The ELX112-CVR is designed specifically for the Electro-Voice ELX112 PA speaker. Featuring custom-fitted heavy-duty nylon construction padded interior and proudly emblazoned with the EV logo this cover will help to keep your ELX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport.
£51.75
Electro-Voice ETX-15SP-CVR
Electro-Voice ETX-15SP-CVR Electro-Voice ETX-15SP-CVR Padded Cover for ETX Series ETX-15SP Protect your investment. The ETX-15SP-CVR is designed specifically for the Electro-Voice ETX-15SP PA speaker. Featuring custom-fitted, heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: Product Name: Electro-Voice ETX-15SP-CVR Padded Cover Compatibility: Designed specifically for the Electro-Voice ETX-15SP 15" Powered Subwoofer Material: Heavy-duty nylon construction Interior: Padded for added protection Design Features: Custom-fitted to snugly cover the ETX-15SP subwoofer Reinforced openings for each handle on the cabinet, allowing safe transport and storage without removing the cover Branding: Proudly emblazoned with the EV (Electro-Voice) logo Purpose: Protects the ETX-15SP from dust, scratches, and minor impacts during storage or transport Durability: Built to maintain the subwoofer’s appearance and performance over years of use Availability Status (as of March 28, 2025): Pre-order, no expected delivery date set (contact us for updates) Price: Not explicitly listed on the page, but part of the premium ETX accessory line Delivery Info: Free next working day delivery on orders over £100 placed before 3:30 PM Monday to Friday (UK mainland); large items may take 1-2 days via pallet service. · Product-related questions and answers: Q: What does this cover protect against?A: The ETX-15SP-CVR protects the subwoofer from dust, scratches, and minor bumps during storage or transport. Its padded interior and heavy-duty nylon construction offer a layer of cushioning and durability. Q: Will this fit other Electro-Voice subwoofers, like the ETX-18SP?A: This cover specifically fits the ETX-15SP 15" subwoofer. For the ETX-18SP, you’d need the ETX-18SP-CVR, as dimensions differ between models. Q: Can I use the subwoofer with the cover on?A: No, the cover is designed for storage and transport, not operation. You must remove it during use to prevent overheating and muffled sound, as it lacks openings for ventilation or sound output. Q: How easy is it to put on and take off?A: The custom-fit design ensures it slides on and off easily, with reinforced handle openings that align with the subwoofer’s grips, making it convenient to handle without fully removing the cover during transport. Q: Is this cover weatherproof or waterproof?A: The product description doesn’t specify weatherproofing or waterproofing. It’s primarily for physical protection (e.g., scratches, dust) rather than moisture resistance, so avoid exposing it to rain or heavy humidity. Q: Does it come with a warranty?A: Electro-Voice products typically include a manufacturer’s warranty. Contact us or check Electro-Voice’s official site for specifics on accessory coverage. Q: Why should I buy this instead of a generic speaker cover?A: This cover’s custom fit ensures full protection tailored to the ETX-15SP’s shape, including handle access, which generic covers may lack. The padded nylon and EV branding also suggest higher quality and durability. Q: How heavy is the cover itself?A: Exact weight isn’t provided, but as a padded nylon cover, it’s lightweight—likely adding minimal bulk to the subwoofer’s 44.7 kg (98.5 lbs) weight for easy portability. Q: When can I expect delivery if I pre-order now?A: As of March 28, 2025, it’s on pre-order with no set date. Contact djkit.com for an estimated timeline. Once in stock, expect free next-day UK mainland delivery for orders over £100, or 1-2 days for large items. Q: Is this worth the cost for occasional use?A: If you only use the ETX-15SP occasionally and store it long-term, the cover is a worthwhile investment to prevent dust buildup and minor damage, extending the subwoofer’s lifespan. For frequent movers, its transport protection is even more valuable.
£89.00
Electro-Voice ETX-10P-CVR
Electro-Voice ETX-10P-CVR Electro-Voice ETX-10P-CVR Padded Cover for ETX Series ETX-10P Protect your investment. The ETX-10P-CVR is designed specifically for the Electro-Voice ETX-10P PA speaker. Featuring custom-fitted heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help to keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Purpose: Designed to protect the Electro-Voice ETX-10P powered PA speaker. · Compatibility: Custom-fitted specifically for the ETX-10P model. · Material: Constructed from heavy-duty nylon for durability and resistance to wear. · Padding: Features a padded interior to shield the speaker from scratches, dings, and minor impacts. · Design: Includes reinforced openings for each handle on the speaker cabinet, allowing easy carrying while covered. · Branding: Emblazoned with the EV (Electro-Voice) logo for a professional appearance. · Protection: Helps maintain the ETX-10P’s appearance and sound quality during storage or transport. · Stock Status: Listed as "In stock" (subject to change without prior notice). · Price: £79.00, with financing options available (details on the site). Delivery: Eligible for free next working day delivery on orders over £100 placed before 3:30pm Monday to Friday (UK mainland only; excludes weekends and Bank Holidays). · Product-related questions and answers: Q: Will this cover fit other ETX series speakers, like the ETX-12P or ETX-15P? A: No, the ETX-10P-CVR is custom-fitted for the ETX-10P only. Other ETX models have their own specific covers due to size and shape differences. Q: Is the cover waterproof or weather-resistant? A: It’s made of heavy-duty nylon, which offers some resistance to moisture, but it’s not explicitly waterproof. Avoid exposing it to heavy rain or prolonged wet conditions. Q: Can I leave the cover on while using the speaker? A: No, this cover is intended for storage and transport only. It lacks openings for sound output and could affect audio quality if left on during use. Q: How much protection does the padding provide? A: The padding protects against minor bumps, scratches, and scuffs during transport or storage, but it’s not designed to withstand heavy impacts or drops. Q: Does the cover have its own handles or straps? A: No, it relies on the speaker’s handles, accessible through reinforced openings, for carrying. It doesn’t add separate straps or handles. Q: Is it worth buying if I don’t transport my speaker often? A: If your ETX-10P stays in one place, the cover might not be essential, but it’s still useful for dust protection and keeping the speaker pristine when not in use. Q: How easy is it to put on and remove the cover? A: The custom fit and handle openings make it simple to slide on and off, though it’s snug to ensure a secure fit. Q: Can I qualify for free delivery with just this cover? A: At £79.00, it’s below the £100 threshold for free next working day delivery. You’d need to add items to reach £100 or pay standard shipping costs. Q: Does the cover come with a warranty or return option? A: The listing doesn’t specify a warranty, but djkit.com offers a return policy. Contact their customer service for details on returns or defects. Q: Will the cover protect against dust buildup in storage? A: Yes, the heavy-duty nylon and snug fit make it effective at keeping dust off the speaker during long-term storage.
£75.00
Electro-Voice ETX-12P-CVR
Electro-Voice ETX-12P-CVR Electro-Voice ETX-12P-CVR Padded Cover for ETX Series ETX-12P Protect your investment. The ETX-12P-CVR has been specifically designed for the Electro-Voice ETX-12P PA speaker. Featuring custom-fitted heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help to keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features Product Name: Electro-Voice ETX-12P-CVR Padded Cover Compatibility: Designed specifically for the Electro-Voice ETX-12P PA speaker Material: Custom-fitted heavy-duty nylon construction Interior: Padded interior for added protection Branding: Proudly emblazoned with the EV (Electro-Voice) logo Handle Access: Reinforced openings for each handle on the speaker cabinet, allowing safe transport and storage without removing the cover Purpose: Protects the ETX-12P speaker from dings, dents, scrapes, scuffs, dust, and minor liquid spills Durability: Heavy-duty nylon shell enhances longevity and resistance to wear Usage: Ideal for storage or transport, helping maintain the speaker’s appearance and performance over time Price: £79.00 Delivery Options: Free next working day delivery on orders over £100 placed before 3:30pm Monday to Friday (UK mainland); larger items may use pallet service (1-2 days) Payment Flexibility: Option to spread the cost of purchases (financing details available on site) Warranty/Support: Covered under Electro-Voice’s warranty and after-sales programmes (specifics not detailed on the product page but typical for EV products) Product-related questions and answers: Q: Will this cover fit other Electro-Voice speakers, like the ETX-15P or EKX-12P?A: No, the ETX-12P-CVR is custom-designed specifically for the Electro-Voice ETX-12P speaker. It won’t fit other models like the ETX-15P or EKX-12P due to differences in size and shape. Check djkit.com for model-specific covers. Q: Is the cover waterproof?A: The cover is made of heavy-duty nylon, which offers some resistance to minor liquid spills, but it is not fully waterproof. It’s best suited for protection against dust, scratches, and light moisture rather than heavy rain or submersion. Q: Can I use the speaker with the cover on?A: No, this cover is intended for storage and transport, not for use while the speaker is operational. It lacks openings for sound output or controls, so you’ll need to remove it during use. Q: How durable is the padding inside the cover?A: The padded interior is designed to protect against minor impacts, such as bumps during transport. While it’s not specified as heavy-duty padding, it’s sufficient for general protection, though it may not withstand severe drops or heavy pressure. Q: Does the cover come with a carrying strap or bag for easier transport?A: No, the cover itself doesn’t include a strap or bag. However, it has reinforced handle openings, so you can carry the speaker by its built-in handles while the cover is on. Q: How easy is it to put the cover on and take it off?A: The custom-fitted design ensures a snug fit, and the reinforced handle openings suggest it’s designed to slide on and off relatively easily. User reviews on similar EV covers (e.g., ZLX-12-CVR) mention features like Velcro openings for convenience, though this isn’t explicitly confirmed for the ETX-12P-CVR. Q: Is this worth the £79 price tag?A: If you frequently transport or store your ETX-12P speaker and want to maintain its condition, the cover is a worthwhile investment. It’s a small cost compared to repairing or replacing a high-end speaker, and the EV branding ensures quality. Q: Can I get free delivery if I only buy the cover?A: The cover alone costs £79, which is below the £100 threshold for free next-day delivery on djkit.com. You’d need to add at least £21 more to your order (e.g., cables or accessories) to qualify, or you’ll pay a standard shipping fee. Q: Does the cover protect against extreme temperatures or sunlight?A: The nylon material and padding offer basic physical protection, but there’s no mention of UV resistance or thermal insulation. For prolonged exposure to sunlight or extreme heat/cold, additional precautions might be needed. Q: Are there any reviews available for this specific cover?A: As of the product page, there are no user reviews listed for the ETX-12P-CVR. However, similar EV covers (e.g., ETX-18SP-CVR) have positive feedback for fit and protection, suggesting this model likely performs comparably.
£79.00
Electro-Voice ETX-18SP-CVR
Electro-Voice ETX-18SP-CVR Electro-Voice ETX-18SP-CVR Padded Cover for ETX Series ETX-18SP Protect your investment. The ETX-18SP-CVR is designed specifically for the Electro-Voice ETX-18SP PA speaker. Featuring custom-fitted, heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Purpose: Designed to protect the Electro-Voice ETX-18SP powered subwoofer. · Compatibility: Custom-fitted specifically for the ETX-18SP model. · Material: Made from heavy-duty nylon for durability and resistance to wear. · Padding: The interior of the subwoofer is padded to protect it from scratches, dings, and minor impacts. · Design: The subwoofer cabinet includes reinforced openings for each handle, enabling easy transport while covered. · Branding: Emblazoned with the EV (Electro-Voice) logo for a professional and recognisable look. · Protection: By shielding the ETX-18SP during storage or transport, it helps keep it looking and sounding great. · Stock Status: Listed as "In stock" (subject to change without prior notice). · Price: £95.00, with financing options available (details on the site). Delivery: Eligible for free next working day delivery on orders over £100 placed before 3:30pm Monday to Friday (UK mainland only; excludes weekends and Bank Holidays). Product-related questions and answers: Q: Will this cover fit other ETX series subwoofers, like the ETX-15SP? A: No, the ETX-18SP-CVR is custom-fitted for the ETX-18SP only. Other ETX models, such as the ETX-15SP, require their specific covers due to size differences. Q: Is the cover waterproof? A: The heavy-duty nylon provides some moisture resistance, but it’s not explicitly advertised as waterproof. It’s best to avoid heavy rain or prolonged exposure to water. Q: Can I use the subwoofer with the cover on? A: No, this cover is designed for storage and transport, not for operation. It could block ventilation and affect sound output if left on during use. Q: How much protection does the padding offer? A: The padding is sufficient for minor bumps and scratches during transport or storage, but it’s not designed to protect against significant drops or heavy impacts. Q: Does the cover have its own carrying straps? A: No, it doesn’t have separate straps. It uses reinforced openings to access the subwoofer’s built-in handles for carrying. Q: Is it necessary if I only use my subwoofer indoors? A: If you don’t move it often, the cover might not be essential, but it’s still useful for dust protection and keeping the subwoofer in top condition when not in use. Q: How easy is it to put the cover on and take it off? A: The custom fit and handle openings make it easy to slip on and off, though it’s designed to be snug for a secure fit. Q: Can I get free delivery if I only buy this cover? A: At £95.00, it’s below the £100 threshold for free next working day delivery. You’d need to add items to reach £100 or pay standard shipping fees. Q: Does the cover protect the subwoofer’s wheels? A: The cover is designed to fit the entire subwoofer, including the bottom where the casters are, but it’s not specifically padded to protect the wheels from damage.
£99.00
Electro-Voice ETX-15P-CVR
Electro-Voice ETX-15P-CVR Electro-Voice ETX-15P-CVR Padded Cover for ETX Series ETX-15P Protect your investment. The ETX-15P-CVR is designed specifically for the Electro-Voice ETX-15P PA speaker. Featuring custom-fitted, heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: Product Name: Electro-Voice ETX-15P-CVR Padded Cover Purpose: Designed to protect the Electro-Voice ETX-15P PA speaker during storage or transport Material: Heavy-duty nylon construction with a padded interior for added protection Custom Fit: Specifically tailored for the ETX-15P speaker, ensuring a snug and secure fit Handle Access: Reinforced openings for each handle on the speaker cabinet, allowing for easy carrying without removing the cover Branding: Features the EV (Electro-Voice) logo prominently displayed on the cover Durability: Built to withstand regular use, helping to maintain the speaker’s appearance and performance over time Series Compatibility: Part of a series of covers designed for various ETX models (e.g., ETX-12P, ETX-18SP, ETX-35P), ensuring consistency across the product line Availability: Available for purchase online through our website, with potential options for financing or spreading the cost of the purchase Product-related questions and answers: Q: What is the purpose of the ETX-15P-CVR cover?A: The cover protects the Electro-Voice ETX-15P speaker during storage or transport, helping to prevent damage and maintain its condition. Q: Is this cover compatible with other speaker models?A: No, it is specifically designed for the ETX-15P speaker. It may not fit other models perfectly and could provide inadequate protection if used with them. Q: What materials is the cover made of?A: It is constructed from heavy-duty nylon with a padded interior, offering durability and cushioning for the speaker. Q: Does the cover provide protection during transport?A: Yes, the padded interior and reinforced handle openings help protect the speaker from scratches, dents, or other damage during transport. Q: Are there any additional features or benefits of this cover?A: Beyond protection, it offers a custom fit, reinforced handle access for convenience, and the EV logo for brand consistency and aesthetic appeal. Q: Can I use this cover for other ETX series speakers?A: No, each cover in the ETX series is model-specific (e.g., ETX-12P, ETX-18SP). Using the ETX-15P-CVR on a different model may result in a poor fit and reduced protection. Q: Is the cover easy to put on and take off?A: While not explicitly stated, padded covers like this are typically designed for easy application and removal, especially with handle openings that allow use without taking the cover off. Q: Does the cover protect the bottom of the speaker?A: It’s designed to protect the main body of the ETX-15P speaker, but it may not fully cover the bottom (e.g., feet or pole mount), as is common with similar covers. Exact coverage isn’t specified. Q: Is this cover suitable for long-term storage?A: Yes, it’s ideal for long-term storage, keeping the speaker clean and protected from dust or minor impacts. Q: Are there financing options available for purchasing this cover?A: Yes, we offer options to spread the cost of purchases, including potential financing plans, depending on the total order value.
£89.00
Electro-Voice ETX-35P-CVR
Electro-Voice ETX-35P-CVR Electro-Voice ETX-35P-CVR Padded Cover for ETX Series ETX-35P Protect your investment. We specifically designed the ETX-35P-CVR for the Electro-Voice ETX-35P PA speaker. Featuring custom-fitted heavy-duty nylon construction, a padded interior, and proudly emblazoned with the EV logo, this cover will help to keep your ETX looking and sounding great for many years to come. Each cover has a reinforced opening for each handle on your cabinet so you can keep them safe during storage or transport. Key features: · Purpose: Designed specifically to protect the Electro-Voice ETX-35P PA speaker. · Material: Custom-fitted heavy-duty nylon construction for durability and long-lasting use. · Interior: Padded interior to provide cushioning and safeguard the speaker from scratches or impact during storage or transport. · Design: Tailored fit ensures the cover snugly fits the ETX-35P, offering maximum protection. · Handle access: Reinforced openings for each handle on the speaker cabinet, allowing easy carrying without removing the cover. · Branding: Proudly emblazoned with the EV (Electro-Voice) logo for a professional look and brand recognition. · Longevity: This feature helps maintain the speaker's appearance and sound quality over years of use. Use case: Ideal for storage or transport, protecting the investment from dust, minor bumps, and environmental wear. · Product-related questions and answers: Q: Will this cover fit other Electro-Voice speaker models, like the ETX-15P or ETX-18SP?A: Specifically designed for the Electro-Voice ETX-35P speaker, the ETX-35P-CVR is unique. It won’t fit other models like the ETX-15P or ETX-18SP, which have their own dedicated covers (e.g., ETX-15P-CVR or ETX-18SP-CVR). Q: Can I use the speaker with the cover on during a performance?A: This cover is intended for storage and transport, not for use during operation. It lacks openings for sound output or controls, so it should be removed before using the speaker. Q: How durable is the cover for outdoor transport?A: The heavy-duty nylon construction is robust and suitable for protecting the speaker during transport, including outdoor use. However, it’s not explicitly waterproof, so extra care (e.g., a rain cover) might be needed in wet conditions. Q: Does the cover protect against major impacts, like drops?A: The padded interior offers protection against minor bumps and scratches, but it’s not designed to withstand significant impacts like drops. For such scenarios, a hard case might be a better option. Q: Are the handle openings large enough for easy gripping?A: Yes, the cover features reinforced openings aligned with the ETX-35P’s handles, ensuring you can grip and carry the speaker comfortably without removing the cover. Q: How easy is it to put on and take off the cover?A: The custom-fitted design means it slides on and off easily while still providing a snug fit. The handle openings also help with positioning and removal. Q: Is this cover worth the investment if I already have a flight case?A: If you use a flight case for heavy-duty transport, this padded cover is still useful for lighter protection, such as preventing dust buildup during storage or short trips where a flight case might be overkill. Q: Does the cover come with a warranty?A: Electro-Voice products typically come with a manufacturer’s warranty. Get in touch with us or Electro-Voice directly to confirm coverage for this accessory. Q: Can I clean the cover if it gets dirty?A: Although not specifically mentioned, you can usually spot-clean nylon covers using a damp cloth and mild soap. Avoid machine washing or harsh chemicals to preserve the padding and stitching. Q: Will this cover fit over additional accessories attached to the speaker, like cables or mounts?A: The cover is tailored to the ETX-35P’s dimensions without extra accessories. Attached cables or mounts might prevent a proper fit, so it’s best to remove them before covering.
£119.00
Chauvet CHS-360
CHS-360 is a rugged carry case made for theĀIntimidator Spot 360. It features tough hard shell exterior that protects the fixture and the custom interior molds lock the fixtures in place during transportation. Durable carry bag designed to easily transport anĀIntimidator Spot 360 Hard shell exterior protects your investment Custom interior moulds lock the fixtures in place during transportation
£75.00
Chauvet CHS-GBM Case
Taking the power of your GigBAR anywhere is easier than ever with CHS-GBM a Hard-shell case designed to efficiently transport a GigBAR from show to show. The case is made of high strength polypropylene material and is resistant to water and the rigors of the road. CHS-GBM has dedicated space for the fixture tripod foot switch RF remote and multiple DFI-USB and DFI-XLRs so there is no part of your GigBAR rig you cant take with you. The custom molded interior ensures a damage-free transportation experience and built-in wheels make movement stress-free. Rugged piano hinges allows the lid to remain open without falling down. Highlights Pelican-style case designed to efficiently transport a GigBAR from show to show Dedicated space for the fixture tripod foot switch RF remote and multiple DFI-USB and DFI-XLRs High strength polypropylene material is water-resistant and resistant to damage Custom molded interior ensures a damage-free transportation experience Built-in wheels make movement stress-free Rugged piano hinge allows the lid to remain open without falling down
£219.00
Chauvet CHS-BPK
The CHS-BPK backpack easily transports a multitude of gear and laptops. Plenty of compartments keep everything organized and easily accessible and a dedicated internal compartment features an audio cable pass-through for MP3 players or cell phones. Keep hands free with the Dual D-rings to attach large items and a quick-release keychain to store keys or thumb drives. The bags super soft padding wont scratch or dent sensitive items during transportation. Durable backpack designed to easily transport a multitude of gear Plenty of compartments keep everything organized and easily accessible Dedicated internal compartment with audio cable pass-through for MP3 player or cell phone Dual D-rings allow additional large items to be attached which keep hands free Quick-release keychain stores keys or thumb drives without sacrificing access Quick-release keychain stores keys or thumb drives without sacrificing access Fits most 15.4 in laptops
£79.00
Accu-Case ASC-AC-63
Protects 2 lighting tripod stands from scratches and dents Large zipper opening to easily take product out or put away
£23.00
Accu-Case ASC-AC-140
Affordable padded soft cases designed to protect and extend the life of mobile lighting fixtures Great for mobile DJs Karaoke rigs and working bands Secured zipped pocket for storing extra lamps clamps cables and other accessories Saves valuable transport space by allowing fixtures to be stacked without having to be boxed Secure "view windows" on Arriba Cases make it easy to identify specific fixtures even after they've been packed or place your business card in the window for personal identification Extra wide mouth design allows gear to be removed quickly and easily.
£30.00
Accu-Case ASC-AC-159
Case fits: The Accu-Case ASC-AC-159 is primarily designed to protect LED Effect Bar style fixtures ADJ Revo Xpress LED ADJ Hyper Gem DMX Equinox Quadzilla LEDJ Pixel Bar KAM LED800s
£45.00
Accu-Case ASC-AC-144
Case fits: iSolution HID-150 iRock 5B +5S Works with all brands of lighting fixtures Affordable padded soft cases designed to protect and extend the life of mobile lighting fixtures Great for mobile DJs Karaoke rigs and working bands Secured zipped pocket for storing extra lamps clamps cables and other accessories Saves valuable transport space by allowing fixtures to be stacked without having to be boxed Secure view windows on Arriba Cases make it easy to identify specific fixtures even after they've been packed or place your business card in the window for personal identification Extra wide mouth design allows gear to be removed quickly and easily. 762x356x356mm
£41.00
Accu-Case ASC-AC-142
Arriba AC-142 X Large Scanner Style Case Case fits: Quazer ball iSolution iRock 575S iSolution iRock 5B + 5S iSolution iRock 7B + 7S ADJ Roto Balls Tri LED ADJ Accu Roller 250 ADJ Accu Scan 250 ADJ Hypergem Equinox Quattro Chauvet Bubble King QTX Helios 4 LED
£38.00
Accu-Case ASC-AC-131
The Arriba Cases AC-131 is primarily designed to protect LED Effect Light style fixtures: ADJ Quad Gem DMX ADJ Hyper Gem DMX ACME MiracLED ACME Venom Equinox Quattro Chauvet Mega Moon Chauvet Sweeper LED KAM LED Quadtrix KAM LED Swingfire Dimension :Ā530x330x215mm
£29.00
