RANE ONE
Motorised Serato DJ Controller for mobile and scratch DJs
Visit the Rane store.
-
To be notified when this product becomes available enter your email address here.
-
£1,349.00 inc. VATwith HDJ-CUE1 Headphones
-
£1,479.00 inc. VATwith DM-40D Monitors & HDJ-CUE1 Headphones
SKU: DJK44312 • EAN: 0694318025079
Special Offers When bought with this product
Key Features
Their first complete DJ controller features 2 motorised 7.2 inch platters with real vinyl and a built in high quality scratch mixer.
Laid out like a traditional DJ controller, it has a high torque, direct drive deck with a 7.2 inch platter. The platter has a real slipmat and 7"vinyl with a quick release to allow the installation of a custom vinyl to change the look of your controller.
Each side also has a full length pitch slider, 8 RGB performance pads and a touch strip for needle drops.
There is also a setting for adjusting the start and stop time, dedicated looping controls and the large RANE industrial Start/Stop button.
The mixer is a typical RANE scratch mixer, similar to the RANE SEVENTY with their new MAG FOUR crossfader for super smooth response and durability.
You get the standard 3 band EQ and filter which can also be used with the external inputs. Software FX can easily be triggered with large paddle switches which can be latched on or temporary.
Connect two turntables or multiplayers and get DVS control over the software.
Connectivity wise, the ONE has 2 mic inputs on XLR/ TRS combination sockets, master and booth outputs on XLR as well as RCA inputs for bot channels and AUX. There are also 2 USB connectors to allow for 2 computers to be connected simultaniously for back to back DJ sets.
Supports Serato DJ Pro as standard and activates it straight away. You get all the new Serato features including scratch banks.
It has the typical 'tank like' build quality found in all the RANE products with high quality components and metal casing.
Features:
- 2 channel Serato DJ controller
- 7.2" direct drive motorised platters
- 16 RGB performance pads
- MAG FOUR Crossfader
- FX paddle triggers
- XLR outputs
- Dual USB connectors
Bundles
Customers Also Bought
Product Description
Digital Audio
Converters : Cirrus Logic, 24-bit PCM, 48kH
Digital Signal Processing :32-bit, Floating Pont, Double precision
Dynamic Range (A-weighted, unity gain)
- ADC: 113dB
- DAC: 113dB
- CD Input to Analog Output: 110dB
- CD Input to USB Output: 113dB
- USB Input to Analog Output: 113dB
Inputs
Microphone 1/2 (Combo XLR/1/4” [6.35mm] TRS, Mic/Line switchable)
- Analog Gain: 25dB
- Maximum Input: 110mV
- Gain Trim: Off to +26dB (unity at center)
- Tone Control: 2-band
Aux Input (RCA stereo pair)
- Maximum Input: 4Vrms
- Dynamic Range (A-weighted): 114dB
- Gain Trim: Off to +12dB
- Tone Control: 2-band
CD/Phono Inputs 1/2 (RCA stereo pairs, switchable)
- CD: Line
- Maximum Input: 4Vrms
- Gain Trim: Off to +12dB
- Tone Control: 3-band, full-cut to +10dB
- THD+N (20kHz BW @ 1kHz): 0.004%
- Phono: RIAA
- RIAA Curve: +/-0.25dB
- Gain (@ 1kHz): 31.5dB
- Maximum Input (@ 1kHz): 106mV
- Dynamic Range (A-weighted): 102dB
Outputs
- Main Outputs (XLR)
- Gain Trim: Off to 0dB
- Maximum Output: 8Vrms
- THD+N (20kHz BW @ 1kHz): 0.004%
- Frequency Response: Flat
- Booth Outputs (XLR)
- Gain Trim: Off to 0dB
- Maximum Output: 8Vrms
- THD+N (20kHz BW @ 1kHz): 0.004%
- Frequency Response: Flat
- Master Outputs (RCA stereo pair)
- Maximum Output: 4Vrms
- THD+N (20kHz BW @ 1kHz): 0.004%
- Frequency Response: Flat
- Headphone Outputs (1/4”/6.35 mm & 1/8”/3.5 mm TRS)
- Maximum Output Voltage: 4Vrms (no load): 50mW (50 ohms)
- Output Power: 0.004%
- Dynamic Range (A-weighted): 108dB
General
- Pads
- 16 velocity-sensitive multi-color back-lit pads (8 per deck, 8 modes each)
- Faders
- 1 MAG FOUR tension-adjustable crossfader with independent Contour and Reverse controls
- 2 Standard channel faders with shared Contour and Reverse controls
- Connectors
- 2 XLR outputs (Main)
- 2 XLR outputs (Booth)
- 1 RCA stereo output pair (Master)
- 2 XLR / 1/4” (6.35mm) TRS inputs (Mic 1–2) (2) RCA stereo input pairs (Deck 1–2)
- 1 RCA stereo input pair (Aux)
- 1 1/4” (6.35mm) TRS output (Headphones) (1) 1/8” (3.5mm) TRS output (Headphones)
- 2 USB Type-B ports
- 1 IEC power cable input
Power
- Connection: IEC
- Voltage: 100–240V, 50/60Hz
- Consumption: 50W
Dimensions (WxDxH)
- 26.5” x 13.6” x 4.9”, 674 x 345 x 124.3 mm
Weight (including platters)
- 23.55 lb. 10.68kg