Yamaha DBR15 - B-Stock

1600W of intense power paired with dual 18" custom high-output woofers for room shaking, chest-pounding low end performance
"Built-Like-A-Tank" all-wood, internally-braced cabinet delivers professional-grade road-worthiness and near zero distortion even at High-Efficiency 1000W Class-D Amplifiers

The DBR's lightweight, high performance Class-D amplifier in the range is capable of producing up to 1000W of power delivered with remarkable clarity and dynamic characteristics. 

Custom Designed Transducer

The high power output woofers deliver well-defined, powerful bass with minimal distortion, while the 1.4" precision compression driver* produces accurate mid-range and high frequencies. 
*DBR10 features a 1" compression driver.
A Rugged, Highly Portable Cabinet

DBR Series speakers feature a compact, lightweight, and durable plastic cabinet which offers the highest level of portability of all Yamaha powered speakers. The sleek steel grille bolsters cabinet durability and protects the internal components while a newly designed ergonomic handles provide effortless transportation and system setup.
Easy-to-use Onboard 2-Channel Mixer

DBR Series speakers have two input channels. CH1 has a combo jack which accepts both XLR and TRS Phone allowing for either Mic or Line level input signals. CH2 offers two input options; a combo jack that accepts XLR or TRS Phone, and an RCA pin jack for input from CD players or other stereo line-level sources. The onboard mixer allows you to select either CH1+2 MIX to mix the signal of CH1 and CH2, or CH1 THRU to pass the signal from CH1 only.
Smart Enclosure Design for Floor Monitoring

DBR Series speakers feature an optimized 50°wedge angle for floor monitoring. In addition the DBR12 and DBR15's symmetrical shape allows for effortless configuration of a mirror-mode floor monitoring system in either symmetrical or stereo sound field setups.
Rigging Points for Installation Applications

DBR loudspeakers come equipped with M8 rigging threads, allowing for rigged applications with optional speaker brackets or standardized eye-bolts. 
*Speaker brackets and eye-bolts are not included.
high volume
Front ported for maximum low-frequency extension and punch
Stereo XLR inputs plus stereo XLR full-range and high-pass outputs
Integrated digital crossover with variable control and presets for Mackie SRM loudspeakers
Smart Protect™ DSP kicks in to protect your investment when things get pushed a little too hard
Built-in cup for easily pole-mounting full-range loudspeakers


General specifications DBR15

Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type 2-way,
Nominal coverage H 90°
V 60°
Components LF Diameter:15" cone, Voice Coil:2.5", Magnet:Ferrite
HF Diaphragm:1", Type: 1" throat compression driver, Magnet:Ferrite
Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
Maximum output level (1m; on axis) 132dB SPL
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF
Heat dissipation Fan cooling, 4 speeds
Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
Power consumption 74W(1/8 Power Consumption), 18W(Idle)
Cabinet material Plastic
Pole socket 35mm (Bottom x 1)
Finish Black
Handle Top x 1 Side x 2 Side x 2
Flying and mounting hardware Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
Dimensions W 455mm (17.9")
H 700mm (27.6")
D 378mm (14.9")
Net weight 19.3 kg (42.6 lbs)
Accessories BBS251BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket)