Shure BLX288UK/PG58
Dual Wireless Vocal System with PG58
Visit the Shure store.
SKU: DJK16714 • EAN: 00042406247849
Special Offers When bought with this product
Key Features
The Shure BLX288UK/PG58 offers outstanding vocal reproduction alongside rock solid wireless connectivity allowing the freedom of the entire stage. The BLX288UK/PG58 system provides the ideal solution when looking for clear vocal reproduction in any situation when two handheld wireless microphones are required at the same time.
Shure PG58 capsules ensure accurate reproduction of vocals, with a consistent warm tone. The BLX2/PG58 transmitters features a lightweight design with rugged construction to stand up to the rigors of the stage.
The BLX88 receiver receives both handsets and has been designed for a quick setup, with user friendly intuitive controls making operation easy. Separate audio outputs are provided for each channel with individual control. Microprocessor controlled internal antenna diversity provides rock solid and dependable communication to the transmitters whilst the 'One touch-QuickScan' frequency selection system quickly locates the best open frequencies to battle any potential interference.
For a dual wireless system you can depend on for crystal clear vocals and stage ready reliability, the Shure BLX288UK/PG58 is the perfect choice.
The system includes: 1 x BLX88 dual channel receiver, 2 x BLX2/PG58 handheld transmitters, 2 x microphone clips and 2 x power supplies.
Channel 38 - License required
The Shure BLX range operate on the K3E frequency range of 606 - 630 MHZ which requires a shared UHF license.
These are available from Ofcom, more details can be found here: https://www.ofcom.org.uk/manage-your-licence/radiocommunication-licences/pmse/pmse-technical-info/mics-monitors/shared
Bundles
Customers Also Bought
Product Description
Shure BLX288UK/PG58 Additional Overview:
- Entry point to professional Shure quality, ruggedness and sound.
- PG58 Vocal Microphone - Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh ball grille that resists wear and abuse.
- Integral "pop" filter reduces explosive breath sounds and wind noise.
- Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.
- BLX2 Handheld Transmitter - Power and battery status LED
- Adjustable gain control
- Quick and easy frequency matching
- AA batteries (included) provide up to 14 hours of continuous use
- 100 m (300 ft.) operating range (line of sight)
- Receiver BLX88 - Up to 12 compatible systems (region dependent)
- Microprocessor-controlled internal antenna diversity
- One touch QuickScan locates the best open frequency
- ¼" and XLR audio outputs
- Two color audio status indicator LED
Shure BLX288UK/PG58 Specification:
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50–15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX88: 12–18 V DC at 320 mA, supplied by external power supply
Component Specifications:
- BLX88 Dual Receiver - Output Impedance:
- XLR connector: 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
- RF Sensitivity: 105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions: 40 mm X 388 mm X 116 mm (H x W x D)
- Weight: BLX88 429 g
- Housing: Molded ABS
- Power Requirements: 12–15 V DC @ 320 mA, supplied by external power supply (tip positive)
- BLX2 Handheld Transmitter - Audio Input Level:
- gain 0dB: -20 dBV maximum
- gain -10dB: -10 dBV maximum
- Gain Adjustment Range: 10 dB
- RF Transmitter Output: 10 mW, typical, varies by region
- Dimensions: 224 mm X 53 mm dia.
- Weight: 218 g (without batteries)
- Housing: Molded ABS
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
Videos
There are no videos for this product.
