Shure BLX24UK/PG58
Wireless Vocal System with PG58
Visit the Shure store.
SKU: DJK16712
Special Offers When bought with this product
Key Features
The Shure BLX24UK/PG58 offers outstanding vocal reproduction alongside rock solid wireless connectivity allowing the freedom of the entire stage.
For vocal clarity the PG58 capsule reproduces vocals with accuracy and a warm clean tone. The BLX2/PG58 transmitter features a lightweight design with rugged construction to stand up to the rigors of the stage.
The BLX4 receiver has been designed for a quick setup, with user friendly intuitive controls making operation easy. Microprocessor controlled internal antenna diversity provides rock solid and dependable communication to the transmitter whilst the 'One touch-QuickScan' frequency selection system quickly locates the best open frequency to battle any potential interference.
For a wireless system you can depend on for clear vocal tone and stage ready reliability, the Shure BLX24UK/PG58 is the perfect choice.
The system includes: BLX4 single-channel receiver, BLX2/PG58 handheld transmitter, microphone clip and power supply.
Channel 38 - License required
The Shure BLX range operate on the K3E frequency range of 606 - 630 MHZ which requires a shared UHF license.
These are available from Ofcom, more details can be found here: https://www.ofcom.org.uk/manage-your-licence/radiocommunication-licences/pmse/pmse-technical-info/mics-monitors/shared
Bundles
Customers Also Bought
Product Description
Shure BLX24UK/PG58 Specification:
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50–15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX4: 12–18 V DC at 150 mA, supplied by external power supply
Shure BLX24UK/PG58 Additional Overview:
- Entry point to professional Shure quality, ruggedness and sound.
- PG58 Vocal Microphone:
- Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
- Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
- Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
- Cartridge includes a neodymium magnet for high output level.
- Internal shock mount for reduced handling noise.
- Durable metal construction.
- On/off switch for onstage control.
- Hardened steel mesh ball grille that resists wear and abuse.
- Integral "pop" filter reduces explosive breath sounds and wind noise.
- Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.
- BLX2 Handheld Transmitter:
- Power and battery status LED
- Adjustable gain control
- Quick and easy frequency matching
- AA batteries (included) provide up to 14 hours of continuous use
- 100 m (300 ft.) operating range (line of sight)
- Receiver BLX4
- Up to 12 compatible systems (region dependent)
- Microprocessor-controlled internal antenna diversity
- One touch QuickScan locates the best open frequency
- ¼" and XLR audio outputs
- Two color audio status indicator LED
Component Specifications:
- BLX4 Receiver - Output Impedance:
- XLR connector 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
- RF Sensitivity: 105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions: 40 mm X 188 mm X 103 mm (H x W x D)
- Weight: 241 g
- Housing: Molded ABS
- Power Requirements: 12–15 V DC @ 160 mA, supplied by external power supply (tip positive)
- BLX2 Handheld Transmitter - Audio Input Level:
- gain 0dB: -20 dBV maximum
- gain -10dB: -10 dBV maximum
- Gain Adjustment Range: 10 dB
- RF Transmitter Output: 10 mW, typical, varies by region
- Dimensions: 224 mm X 53 mm dia.
- Weight: 218 g (without batteries)
- Housing: Molded ABS
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
Videos
There are no videos for this product.