Shure BLX188UK
Dual Bodypack Wireless Guitar & Bass System
Visit the Shure store.
SKU: DJK16717
Special Offers When bought with this product
Key Features
The Shure BLX14UK provides wireless connectivity for guitar and bass players- providing high quality audio whilst allowing the freedom of the entire stage.
Lightweight and robust, the BLX1 bodypack connects directly to your instrument with the supplied cable. Rock solid wireless technology provides top quality audio and reliable connectivity up to 100m from the BLX4 receiver, with 14 hours continuous use possible from 2 AA batteries.
For the freedom to move and keep the power in your sound, the Shure BLX14UK is the perfect choice.
The system includes: 2 x BLX1 body pack transmitter, BLX88 dual channel receiver, 2 x guitar to body pack cable and power supply.
Channel 38 - License required
The Shure BLX range operate on the K3E frequency range of 606 - 630 MHZ which requires a shared UHF license.
These are available from Ofcom, more details can be found here: https://www.ofcom.org.uk/manage-your-licence/radiocommunication-licences/pmse/pmse-technical-info/mics-monitors/shared
Bundles
Product Description
Shure BLX188UK Specifications:
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50–15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX4: 12–18 V DC at 150 mA, supplied by external power supply
Shure BLX188UK Specifications:
- Operating Range: 91 m ( line of sight - actual range depends on RF signal absorption, reflection and interference)
- Available Frequencies: Between 524–865 MHz (available frequencies depend on applicable regulations in country where system used)
- Audio Range: 50–15,000 Hz (dependent on microphone type)
- Transmitter RF Output Power: 10 mW, typical (varies by region)
- Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
- Battery Life: Up to 14 hours
- Dynamic Range: 100 dB A-weighted
- System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
- Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
- Power Requirements: BLX1, BLX2: 2 AA alkaline or rechargeable batteries
- BLX88: 12–18 V DC at 320 mA, supplied by external power supply
Component Specifications:
- BLX88 Dual Receiver - Output Impedance:
- XLR connector: 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone:
- XLR connector –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector –13 dBV (into 100 kΩ load)
- RF Sensitivity: 105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions: 40 mm X 388 mm X 116 mm (H x W x D)
- Weight: BLX88 429 g
- Housing: Molded ABS
- Power Requirements: 12–15 V DC @ 320 mA, supplied by external power supply (tip positive)
- BLX1 Bodypack Transmitter - Audio Input Level:
- gain max: -16 dBV maximum
- gain min (0 dB): +10 dBV maximum
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 MΩ
- RF Transmitter Output: 10 mW, typical, varies by region
- Dimensions: 110 mm x 64 mm x 21 mm (H x W x D)
- Weight: 75 g, without batteries
- Housing: Molded ABS
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
Videos
There are no videos for this product.
