RANE TWELVE MKII Battle Controller and Allen & Heath Xone DB4 - B-Stock Package

RANE TWELVE MKII Battle Controller

Technical Specifications

Motor :

Drive : Quartz direct-drive

Torque : High: 5.0kgf/cm (starting/instant); 3.4kgf/cm (stable)

Low: 3.2kgf/cm (starting/instant); 1.4kgf/cm (stable)

Starting Time: < 0.4 seconds 

Braking System : Electronic

Platter : 

Material : Aluminium die-cast
Diameter : 13.1” / 332mm
Weight : 4.9 lbs. / 2.2g

Speeds:  33 1/3, 45 RPM

Pitch Range:  +8%, +16%, +50%

Connectors 

(1) USB Type-B port

(1) Stereo RCA output

(1) IEC power cable input

Power Connection: IEC

Voltage: 100–240V, 50/60Hz

Consumption: 60W

Dimensions (width x depth x height)

14.5” x 16.2” x 5.3”

368 x 413 x 90mm

Weight:  20.5 lbs. / 9.3kg

Allen & Heath Xone DB4 - B-Stock

Quad FX Core The heart of the Xone:DB4 is the powerful Quad FX Core DSP engine, enabling each channel to have its own FX bank and BPM detection system, which automatically adjusts all time-related FX and loops to the tempo of the music. There are 5 studio quality FX types optimised for DJ use - delays, reverbs, modulators, resonators and damage - plus each FX type has a patch library of different effect variations. Each FX bank has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers in the FX master section.
Looper Each channel has a built-in looper, with selectable loop length from 1/16 beat to 4 bars.The :DB4 will always record the full 4 bars, so the loop can be expanded or shrunk at will.
Filters Xone:DB4 comes equipped with the Xone dual filter system.
Source select Each music channel can select any of the available stereo music sources: Analogue Line 1-4 (switchable to Phono on 2-3), Digital 1-4 or USB 1-4.
EQ / Filter Each music channel has a 3-band EQ that can be configured as standard asymmetric EQ (+6/-25dB), Isolator (+6dB/OFF with a 24dB/octave slope), or reconfigured as a High-Pass/Low-Pass filter system with adjustable resonance. EQ knob pointers change colour to show which type of equalization is active.
Mic/Line Input The Mic/Line input has 2-band EQ, gain, cue and mix level. This can also be routed to channel 1 for adding FX.
Integral Soundcard A built-in, high quality (24-bit / 96kHz), multi-channel, fully patchable USB2 soundcard allows replay and recording from audio software for 4 stereo sends and 4 stereo returns.