RANE TWELVE MKII Battle Controller and Numark C3 USB Package
Visit the Rane store.
-
To be notified when this product becomes available enter your email address here.
SKU: PKG-42254-4121
RANE TWELVE MKII Battle Controller and Numark C3 USB Package Special Offers When bought with this product


RANE TWELVE MKII Battle Controller and Numark C3 USB Package Product Description
If you haven't got an Amplifier or Stereo you can add a pair of Powered Monitors or a Complete Sound System please see special offers below.
What you get:
2 x RANE TWELVE MkII Battle Controller
1 x Numark C3 USB Mixer
1 x Numark HF-125 Headphones
1 x Cable to link to Amp / Stereo system.
RANE TWELVE MKII Battle Controller and Numark C3 USB Package Bundles
Customers Also Bought
Technical Specs
RANE TWELVE MKII Battle Controller
Technical Specifications
Motor :
Drive : Quartz direct-drive
Torque : High: 5.0kgf/cm (starting/instant); 3.4kgf/cm (stable)
Low: 3.2kgf/cm (starting/instant); 1.4kgf/cm (stable)
Starting Time: < 0.4 seconds
Braking System : Electronic
Platter :
Material : Aluminium die-cast
Diameter : 13.1” / 332mm
Weight : 4.9 lbs. / 2.2g
Speeds: 33 1/3, 45 RPM
Pitch Range: +8%, +16%, +50%
Connectors
(1) USB Type-B port
(1) Stereo RCA output
(1) IEC power cable input
Power Connection: IEC
Voltage: 100–240V, 50/60Hz
Consumption: 60W
Dimensions (width x depth x height)
14.5” x 16.2” x 5.3”
368 x 413 x 90mm
Weight: 20.5 lbs. / 9.3kg
Numark C3 USB
- Five-channel rack DJ mixer
- Inputs: three phono (RCA), eight line (RCA), three mic (1/4")
- Outputs: Balanced (XLR), Master (RCA), Record (RCA), Zone (RCA), Headphone (1/4" stereo)
- Two USB jacks, each assignable to input or output
- USB input for connecting computers for audio input
- USB output for recording gigs to computer
- Three-band EQ each channel
- Microphone channel with EQ
- Replaceable, assignable crossfader
- No software drivers needed for use with Windows XP/Vista or Mac OS X
- Works with almost any audio recording software
- Inputs:
- Line: 10Kohm input impedance; 77mV rms sensitivity for 1.22V output
- Mic: 600 ohm input impedance unbalanced; 1mv rms sensitivity for 1.22V output; 70mV rms max input
- Phono: 47Kohm input impedance; 1.2mV rms sensitivity @1KHz for 1.22V output
- Outputs:
- Line: 9V rms max
- Headphone: 0.5W into 47 ohm
- Distortion: less than 0.01%
- Signal to Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 98dB
- Mic: Better than 86dB
- Phono: Better than 81dB
- Frequency response:
- Line: 20Hz-20KHz ±0.5dB
- Mic: 20Hz-15KHz ±0.5dB
- Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback
- EQ (Channel):
- Bass: +12/-32dB @60Hz
- Middle: +12/-32dB @1.2KHz
- Treble: +10/-28dB @15KH
- EQ (Mic):
- Bass: ±10dB @100Hz
- Treble: ±10dB @15KH
- Power consumption: 11 Watt typical; 14.7 Watt with full headphone output
- System requirements for USB functionality:
- PC: Windows XP or Vista
- Mac: OS X
- USB port