Denon DJ SC6000 Prime and Allen & Heath Xone DB4 - B-Stock Package

Denon DJ SC6000 Prime

Technical Specifications

Analogue Output 2.0Vrms (0dBFS, 1kHz)

Frequency Range 22–22,000Hz

Signal-to-Noise Ratio 116dB

THD+N < 0.0015%

Digital Output

  Sampling Rate 96kHz
  Bit Depth  24-bit

Playable Media

  Type SD/SDHC card USB mass-storage devices (flash    
           memory, external HDD enclosures)

  File Systems exFAT,  FAT32 (recommended)
  File Formats  
  AAC/M4A
  AIF/AIFF (44.1–192 kHz, 16–32-bit)
  ALAC
  FLAC
  MP3 (32–320kbps)
  MP4
  Ogg Vorbis
  WAV (44.1–192kHz, 16–32-bit)

Platters 8.5” / 216 mm (diameter)
Metal construction with display & touch-capacitive circuitry

Displays
 Main 10.0” / 254mm (diagonal) Full-colour LED-backlit  display with touch interface
 Platter 3.5” / 89mm (diameter) Full-colour LED-backlit display

Connections
(2) RCA output pairs
(2) coaxial digital outputs
(1) 1 ⁄ 8” (3.5mm) mini TS input (remote start)
(3) USB Type-A ports (for USB drives) (Rear-panel ports supply 900mA for USB 3.0 devices, 500mA for USB 2.0 devices. Front-panel port supplies 500mA for USB 2.0 devices only.)
(1) USB Type-B port (for computer connection)
(1) SD card slot
(1) Ethernet link port
(1) IEC power input

Power
Connection IEC
Input Voltage 110–240VAC, 50/60Hz 
Consumption  75W

Dimensions (width x depth x height)
12.6” x 16.5” x 5.3”
32.0 x 41.9 x 13.5cm

Weight 8.79 lb. / 3.99 kg

Allen & Heath Xone DB4 - B-Stock

Quad FX Core The heart of the Xone:DB4 is the powerful Quad FX Core DSP engine, enabling each channel to have its own FX bank and BPM detection system, which automatically adjusts all time-related FX and loops to the tempo of the music. There are 5 studio quality FX types optimised for DJ use - delays, reverbs, modulators, resonators and damage - plus each FX type has a patch library of different effect variations. Each FX bank has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers in the FX master section.
Looper Each channel has a built-in looper, with selectable loop length from 1/16 beat to 4 bars.The :DB4 will always record the full 4 bars, so the loop can be expanded or shrunk at will.
Filters Xone:DB4 comes equipped with the Xone dual filter system.
Source select Each music channel can select any of the available stereo music sources: Analogue Line 1-4 (switchable to Phono on 2-3), Digital 1-4 or USB 1-4.
EQ / Filter Each music channel has a 3-band EQ that can be configured as standard asymmetric EQ (+6/-25dB), Isolator (+6dB/OFF with a 24dB/octave slope), or reconfigured as a High-Pass/Low-Pass filter system with adjustable resonance. EQ knob pointers change colour to show which type of equalization is active.
Mic/Line Input The Mic/Line input has 2-band EQ, gain, cue and mix level. This can also be routed to channel 1 for adding FX.
Integral Soundcard A built-in, high quality (24-bit / 96kHz), multi-channel, fully patchable USB2 soundcard allows replay and recording from audio software for 4 stereo sends and 4 stereo returns.