Denon DJ SC6000 Prime and Numark C3 USB Package
Visit the Denon DJ store.
-
To be notified when this product becomes available enter your email address here.
SKU: PKG-39735-4121
Denon DJ SC6000 Prime and Numark C3 USB Package Special Offers When bought with this product
Denon DJ SC6000 Prime and Numark C3 USB Package Product Description
If you haven't got an Amplifier or Stereo you can add a pair of Powered Monitors or a Complete Sound System please see special offers below.
What you get:
2 x Denon DJ SC6000 Prime
1 x Numark C3 USB Mixer
1 x Numark HF-125 Headphones
1 x Cable to link to Amp / Stereo system.
Denon DJ SC6000 Prime and Numark C3 USB Package Bundles
Customers Also Bought
Technical Specs
Denon DJ SC6000 Prime
Technical Specifications
Analogue Output 2.0Vrms (0dBFS, 1kHz)
Frequency Range 22–22,000Hz
Signal-to-Noise Ratio 116dB
THD+N < 0.0015%
Digital Output
Sampling Rate 96kHz
Bit Depth 24-bit
Playable Media
Type SD/SDHC card USB mass-storage devices (flash
memory, external HDD enclosures)
File Systems exFAT, FAT32 (recommended)
File Formats
AAC/M4A
AIF/AIFF (44.1–192 kHz, 16–32-bit)
ALAC
FLAC
MP3 (32–320kbps)
MP4
Ogg Vorbis
WAV (44.1–192kHz, 16–32-bit)
Platters 8.5” / 216 mm (diameter)
Metal construction with display & touch-capacitive circuitry
Displays
Main 10.0” / 254mm (diagonal) Full-colour LED-backlit display with touch interface
Platter 3.5” / 89mm (diameter) Full-colour LED-backlit display
Connections
(2) RCA output pairs
(2) coaxial digital outputs
(1) 1 ⁄ 8” (3.5mm) mini TS input (remote start)
(3) USB Type-A ports (for USB drives) (Rear-panel ports supply 900mA for USB 3.0 devices, 500mA for USB 2.0 devices. Front-panel port supplies 500mA for USB 2.0 devices only.)
(1) USB Type-B port (for computer connection)
(1) SD card slot
(1) Ethernet link port
(1) IEC power input
Power
Connection IEC
Input Voltage 110–240VAC, 50/60Hz
Consumption 75W
Dimensions (width x depth x height)
12.6” x 16.5” x 5.3”
32.0 x 41.9 x 13.5cm
Weight 8.79 lb. / 3.99 kg
Numark C3 USB
- Five-channel rack DJ mixer
- Inputs: three phono (RCA), eight line (RCA), three mic (1/4")
- Outputs: Balanced (XLR), Master (RCA), Record (RCA), Zone (RCA), Headphone (1/4" stereo)
- Two USB jacks, each assignable to input or output
- USB input for connecting computers for audio input
- USB output for recording gigs to computer
- Three-band EQ each channel
- Microphone channel with EQ
- Replaceable, assignable crossfader
- No software drivers needed for use with Windows XP/Vista or Mac OS X
- Works with almost any audio recording software
- Inputs:
- Line: 10Kohm input impedance; 77mV rms sensitivity for 1.22V output
- Mic: 600 ohm input impedance unbalanced; 1mv rms sensitivity for 1.22V output; 70mV rms max input
- Phono: 47Kohm input impedance; 1.2mV rms sensitivity @1KHz for 1.22V output
- Outputs:
- Line: 9V rms max
- Headphone: 0.5W into 47 ohm
- Distortion: less than 0.01%
- Signal to Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 98dB
- Mic: Better than 86dB
- Phono: Better than 81dB
- Frequency response:
- Line: 20Hz-20KHz ±0.5dB
- Mic: 20Hz-15KHz ±0.5dB
- Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback
- EQ (Channel):
- Bass: +12/-32dB @60Hz
- Middle: +12/-32dB @1.2KHz
- Treble: +10/-28dB @15KH
- EQ (Mic):
- Bass: ±10dB @100Hz
- Treble: ±10dB @15KH
- Power consumption: 11 Watt typical; 14.7 Watt with full headphone output
- System requirements for USB functionality:
- PC: Windows XP or Vista
- Mac: OS X
- USB port
