Audio Technica AT-LP140XP - Black and Allen & Heath Xone 96 Package
Visit the Audio-Technica store.
-
To be notified when this product becomes available enter your email address here.
SKU: PKG-35890-33278
Special Offers When bought with this product
Key Features
If you haven't got an Amplifier or Stereo you can add a pair of Powered Monitors or a Complete Sound System please see special offers below.
What you get:
2 x Audio Technica AT-LP140XP - Black
2 x Audio Technica Cartridges & Stylus
2 x Audio Technica Slipmats
1 x Allen & Heath Xone 96
1 x Numark HF-125 Headphones
1 x Cable to link to Amp / Stereo system.
Bundles
Customers Also Bought
Product Description
Audio Technica AT-LP140XP - Black
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminum platter with felt mat
- AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover
- Available in black (AT-LP140XP-BK) and silver (AT-LP140XP-SV)
Type | 3-speed, fully manual operation |
Motor | High-torque DC motor |
Drive Method | Direct drive |
Speeds | 33-1/3 RPM, 45 RPM, 78 RPM |
Turntable Platter | Die-cast aluminum |
Starting Torque | >2.2 kgf.cm |
Wow and Flutter | <0.2% (WTD) @ 3 kHz (JIS) |
Signal-to-Noise Ratio | >50 dB |
Output Level | 5.5 mV nominal at 1 kHz, 5 cm/sec |
Power Supply Requirements | 115/230V AC, 60/50 Hz |
Power Consumption | 11W |
Dimensions | 452.0 mm (17.80") W x 352.0 mm (13.86") D x 158.6 mm (6.24") H |
Weight | 10.0 kg (22 lbs.), without dust cover |
Accessories Included | AT-XP3 phono cartridge; AT-HS6 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light |
Tonearm type: Balanced S-shaped tonearm with detachable headshell
Effective arm length: 230.5 mm
Overhang: 16 mm
Tracking error angle: Less than 3 degrees
Applicable cartridge weight: 3.5-8.5 g
Anti-skating range: 0-4 g
Replacement Stylus: ATN-XP3
Allen & Heath Xone 96
- Type Analogue
- Channels 6 + 2
- EQ
Channel 1-4, 4-Band EQ
Channel A-B, 3-Band Parametric EQ - USB Soundcards Dual 24 Channel (12 in / 12 out)
Hi-Speed USB2.0 / Mac Class Compliant
24bit / 96kHz
MIDI over USB - Line Inputs 4 x RCA (CH 1-4)
4 x 1/4″ TRS (CH A-D) Mono/Stereo - Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS - USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
- Mic Input 2 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x 1/4″ TRS (Balanced)
- Booth Output 1 x 1/4″ TRS (Balanced)
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Out 1 x 5-Pin DIN
- Send/Return I/O
2 x 1/4″ TRS Send
4 x 1/4″ TRS Return
1 x LN/Hi-Z Switch (SND1/RTNA) - Filter
2 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A-B
CRUNCH (Controlled Harmonic Signal Distortion) - X-Link 1 x RJ45
- Headphones
2 x 1/4″
2 x 3.5mm
Split Cue Monitoring - Channel Faders 60mm VCA / Replaceable
- Chanel Meters 9 Segment LED
- Channel Fader Curve 3 Types
- X-Fader InnoFADER / 45mm VCA / Replaceable
- X-Fader Curve 3 Types
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 45W max - Mains Adaptor 3 pin IEC socket
- Height 109mm / 4.3″
- Width 336mm / 13.25″
- Depth 410mm / 16.2″
- Weight 7kg / 15.4 lbs.