Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package
Visit the EV Electrovoice store.
£1,155.00 inc. VAT
£1,155.00 inc. VAT
Available to pre-order
Expected: 30/06/2022
-
To be notified when this product becomes available enter your email address here.
You save £138.66 when buying this package compared to buying the items individually!
0% Finance Available
from £37.71 per month
Earn
2,310
djkit® loyalty points
Seen a better price?
SKU: PKG-27168-11106
Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package Special Offers When bought with this product
Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package Product Description
We have put this complete Sound system together with everything you need including:
2 x Electro-Voice ZLX-15
1 x Crown XTi 2 1002 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.
See special offers below for extra's to add to this package!
2 x Electro-Voice ZLX-15
1 x Crown XTi 2 1002 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.
See special offers below for extra's to add to this package!
Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package Bundles
All
All
Customers Also Bought
Technical Specs
Electro-Voice ZLX-15
Axial Sensitivity (SPL, 1 W @ 1 m) | 96 dB |
Frequency Range | 44 Hz - 20 kHz |
Maximum SPL | 126 dB |
Nominal Impedance | 8 Ω |
Power Handling (Continuous / Peak) | 250 / 1000 W |
Frequency Response | 56 Hz - 18 kHz |
Recommended High-Pass Frequency | 40 Hz |
Maximum SPL (1% THD) | 0 dB |
Coverage (Nominal -6 dB) H | 90 ° |
Coverage (Nominal -6 dB) V | 60 ° |
LF Transducer | EVS-15L, 380 mm (15 in) Woofer |
HF Transducer | DH-1K |
Crossover Frequency | 1700 Hz |
Minimum Impedance | 7 Ω |
Connector Type | Dual NL4 |
Enclosure Material | Polypropylene |
Grill | 18 Gauge Steel with Black Powder Coat |
Height | 685 mm (26.97") |
Width | 423 mm (16.65") |
Depth | 383 mm (15.08") |
Weight Net | 16.6 kg (36.6 lbs) |
Shipping Weight | 22 kg (48.5 lbs) |
Crown XTi 2 1002 Power Amplifier
- Power: 2 Ohm Stereo (per ch.) 700W, 4 Ohm Stereo (per ch.) 500W, 8 Ohm Stereo (per ch.) 275W, 8 Ohm Bridge-Mono 1000W, 4 Ohm Bridge-Mono 1400W
- Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Locking power cord clip provides a secure connection between the amplifier and power cord
- Updated HiQnet Band Manager and System Architect control software
- Increased number of presets to a total of 30; 29 of which are user definable
- Delay: For signal alignment of driver; 50 mS of total delay.
- Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
- Chassis: Steel
- Front Panel: Cast-aluminum
- Cooling: Proportional speed fan with front-to-rear airflow.
- Dimensions 19" (W) x 3.5" (H) x 12.25" (D)
Electro-Voice ZLX-15 Videos
Seen a video for Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package?
Send us the URL and published videos will receive loyalty points!
There are no videos for this product.
Electro-Voice ZLX-15 and Crown XTi 2 1002 Power Amplifier Package Reviews
Electro-Voice ZLX-15 reviews
Do you own the Electro-Voice ZLX-15? Why not write a review based on your experience with it.
Crown XTi 2 1002 Power Amplifier reviews
Do you own the Crown XTi 2 1002 Power Amplifier ? Why not write a review based on your experience with it.
1
0
0
0
0
Rick
17 January, 2019
Great for monitors!
I used these as monitor amps in a large scale event and they were absolutely fantastic! Would highly recommend any of the XTi series amps!