Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package
Visit the EV Electrovoice store.
£1,155.00 inc. VAT
£1,155.00 inc. VAT
Expected Restocking Date T.B.C.
No expected date set, please contact us for more information.
-
To be notified when this product becomes available enter your email address here.
You save £111.98 when buying this package compared to buying the items individually!
0% Finance Available
from £37.71 per month
Earn
2,310
djkit® loyalty points
Seen a better price?
SKU: PKG-27167-25548
Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package Special Offers When bought with this product
Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package Product Description
We have put this complete Sound system together with everything you need including:
2 x Electro-Voice ZLX-12
1 x Yamaha PX5 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.
See special offers below for extra's to add to this package!
2 x Electro-Voice ZLX-12
1 x Yamaha PX5 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.
See special offers below for extra's to add to this package!
Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package Bundles
All
All
Customers Also Bought
Technical Specs
Electro-Voice ZLX-12
Axial Sensitivity (SPL, 1 W @ 1 m) | 95 dB |
Frequency Range | 55 Hz - 20 kHz |
Maximum SPL | 125 dB |
Nominal Impedance | 8 Ω |
Power Handling (Continuous / Peak) | 250 / 1000 W |
Frequency Response | 82 Hz - 18 kHz |
Recommended High-Pass Frequency | 40 Hz |
Coverage (Nominal -6 dB) H | 90 ° |
Coverage (Nominal -6 dB) V | 60 ° |
LF Transducer | EVS-12K, 300 mm (12 in) Woofer |
HF Transducer | DH-1K |
Crossover Frequency | 2100 Hz |
Minimum Impedance | 7 Ω |
Connector Type | Dual NL4 |
Enclosure Material | Polypropylene |
Grill | 18 Gauge Steel with Black Powder Coat |
Height | 610 mm (24.02") |
Width | 356 mm (14.02") |
Depth | 356 mm (14.02") |
Weight Net | 14.9 kg (32.85 lbs) |
Shipping Weight | 18 kg (39.68 lbs) |
Yamaha PX5 Power Amplifier
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 500W x 2 |
---|---|---|
4Ω | 800W x 2 | |
2Ω | 500W x 2 | |
8Ω/Power Boost Mode | 800W x 1 | |
4Ω/Power Boost Mode | 1400W x 1 |
General specifications
Sampling frequency rate | Internal | 48kHz |
---|---|---|
A/D D/A Converters | AD/DA: 24-bit linear, 128 times over sampling | |
Total harmonic distortion | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | |
Frequency response | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | |
S/N ratio | 100dB (A-weighted, 8Ω, Gain setting = +14dBu) | |
Crosstalk | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | |
Voltage Gain/Sensitivity | 8Ω Volume max | 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) |
8Ω Volume max /Power Boost mode | 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) | |
Maximum input voltage | +24dBu | |
Input impedance | 20kΩ (Balance), 10kΩ (Unbalance) | |
I/O Connectors | Speaker output ports | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 |
Line Input | XLR-3-31 x2, 1/4 "PHONE(TRS) x2 | |
Others | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | |
Indicators | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | |
Processors | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | |
Latency | 1.5 msec (Analog Input to Speakers) | |
Presets | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | |
Protection circuit | Load protection | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) |
Amplifier protection | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | |
Power supply protection | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | |
Amplifier class | Class D, Balanced output circuit (BTL) | |
Cooling | 16 step variable speed fan x 2, front to rear airflow | |
Power requirements | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | |
Power consumption | 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) | |
Dimensions | W | 480mm (18-7/8") |
H | 88mm (3-7/16"): 2U | |
D | 388mm (15-2/8") | |
Net weight | 6.9 kg (15.21 lbs) | |
Accessories | USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1 | |
Others | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C |
Electro-Voice ZLX-12 Videos
Seen a video for Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package?
Send us the URL and published videos will receive loyalty points!
There are no videos for this product.
Electro-Voice ZLX-12 and Yamaha PX5 Power Amplifier Package Reviews
Electro-Voice ZLX-12 reviews
Do you own the Electro-Voice ZLX-12? Why not write a review based on your experience with it.
Yamaha PX5 Power Amplifier reviews
Do you own the Yamaha PX5 Power Amplifier? Why not write a review based on your experience with it.