Pioneer DJ PLX-1000 Turntable and Pioneer DJ DJM-V10-LF Package

Pioneer DJ PLX-1000 Turntable

KEY FEATURES OF THE PLX-1000
High-torque direct drive (33⅓ rpm in 0.3 seconds) Classic DJ turntable layout
Removable power, ground and phono cables S-shaped tone arm
Multiple tempo control options: ±8%, ±16% and ±50%
Tempo reset button
Solid build for excellent vibration damping
Professional-grade gold-plated RCA jacks
Rubber-lined tone arm to improve isolation and prevent feedback
Power requirements
AC 220-240V, 50 Hz/60 Hz
Power consumption
9 W
Main unit weight
13.1 kg
Maximum dimensions
(W x H x D)
453 x 159 x 353 mm
Output
RCA × 1
Turntable
Drive method
Quartz lock servo type direct drive Motor
3-phase brushless DC motor
Braking system
Electronic brake
Rotation speed
33⅓ rpm, 45 rpm
Rotation speed adjustment range
±8%, ±16%, ±50%
Wow and flutter
0.1% or less WRMS (JIS WTD)
S/N ratio
70 dB (DIN-B)
Turntable
Aluminium die-casting diameter: 332 mm
Starting torque
4.5 kg/cm or more

Included Accessories

• Slip Mat
• Slip Sheet
• Dust Cover
• Balance Weight
• Head Shell
• Sub Weight
• Shell Weight
• Adapter for EP Record
• Power Chord
• Audio Cable
• Ground Wire
• Operating Instructions

NB: Not Supplied with Cartridge or Stylus 

Pioneer DJ DJM-V10-LF

KEY FEATURES OF THE DJM-V10-LF

Elite sound quality
Feel the warmth of the mixer’s natural sound and hear every detail in the music. We've adopted studio-quality 96-kHz/64-bit mixing and dithering processing within the DSP, as well as 32-bit high-quality A/D and D/A converters. All of this, plus the low-jitter clock circuit, helps produce a full low-end that’s complemented by vibrant mids and precise highs.

Six channels
Choose your ideal setup and plug in everything from CDJs and turntables to samplers, synths, and drum machines. To make setup easy, the analog input terminals line up with each channel on the top panel, so you’ll always know where to connect your cables when you’re in the booth.

Long throw, 60mm channel faders

4-band EQ
Sculpt your sound just the way you like with the newly developed 4-band EQ. The frequencies, curves, and boost and cut amounts on each band have all been specially designed to give you total flexibility. Completely isolate the high and/or low and tweak the two mid ranges – which have their own custom curves – to fine-tune your mix.

New filter with dedicated knob on each channel
Drastically change the sound of a track or make tiny adjustments using the newly developed filter with resonance control. Switch on high or low pass by pressing either button, then turn the knob from all the way to the left (no filter applied) to the furthest position on the right (maximum filter applied). Because the high and low pass are separated, the entire range of the knob is dedicated to the option you choose, giving you twice the resolution to play with compared to the filter on the DJM-900NXS2. This means you can make much more nuanced adjustments to the effect.

Send/return section
Send audio to one of four built-in FX and up to two pieces of external equipment to create unique sounds and even live remixes. You can connect a variety of units to the TRS jack send/return terminals such as guitar pedals, FX units, and more.

The built-in send/return FX are Short Delay, Long Delay, Dub Echo, and Reverb. With parameter knobs at your fingertips, you can further tweak the FX as follows:
Size/Feedback: changes the room size when using a reverb, and the feedback amount when using delays and echoes.
Time: adjusts the decay time of the reverb and the delay time for delays and echoes.
Tone: changes the hue of the effected sound, making it deep and heavy or light and crisp.
Master Mix Level: acts as the overall volume of the effected sound when Master Mix is turned on.

Whether you’re using external equipment or the built-in FX, you decide where you want to return the audio to. Route it to an empty channel and make further changes to the effected sound using the EQ and filter. You can even drop it straight into your mix by turning on the Master Mix to route it to the master output.


3-band master isolator
Effortlessly control the tone of your entire mix using the 3-band master isolator, which features new boost/cut curves and adjustments to the crossover frequencies and other parameters. Grab the large dials and hype up the crowd by drastically changing the sound.

Compressor knob on each channel
If you want to play old or unmastered tracks but you’re worried they’ll be overwhelmed by the loudness of music made with modern production techniques, the DJM-V10 has the solution. Turn the compressor knob on the relevant channel and the mixer will “beef up” the audio in real time. The quieter the track, the more pressure is added, boosting the sound of “weaker” tracks and having a minimal effect on mastered music.  

Dual headphones output and booth EQ
Plug in your headphones at the same time as another DJ and enjoy independent monitoring. Each headphones output has its own Cue/Master Mix control and level adjustment knob so you can choose what you want to hear as you prepare to take over the decks, or during back-to-back sets. And, with booth EQ, you can tweak the sound from the monitor speakers to prevent ear fatigue during long sets.


Support for external devices, apps, and services
DJ software
Control rekordbox, TRAKTOR PRO 3, and Serato DJ Pro*1.

RMX-1000 for iPad
Plug in your iPad via MULTI I/O, open the RMX-1000 for iPad app, and trigger FX and pre-assigned samples to build up and break down tracks in sync with the beat.

ShowKontrol
The DJM-V10 supports the extended PRO DJ LINK ShowKontrol protocol. This enables DJs, technical producers, LJs, and VJs to use all the important information from the DJM-V10, such as actual fader and knob positions, to effectively align sound and visuals and create shows that blow audiences away.
On top of this, some of the DJM-V10 settings can be remotely configured via ShowKontrol software.

DJM-REC
Efficiently record and easily archive your mixes via the DJM-REC app for iPhone or iPad. Upload your sounds to cloud services or effortlessly live-stream your sets.

Other features
Lockable power cable*2 – avoid accidental disconnection
DIN Midi out – sync external production gear using the BPM from rekordbox