JBL JRX212 and Crown XLi800 Package
Visit the JBL store.
-
To be notified when this product becomes available enter your email address here.
SKU: PKG-15654-16896
JBL JRX212 and Crown XLi800 Package Special Offers When bought with this product
JBL JRX212 and Crown XLi800 Package Product Description
2 x JBL JRX212 Full Range Speakers
1 x Crown XLi800 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.
See special offers below for extra's to add to this package!
JBL JRX212 and Crown XLi800 Package Bundles
Customers Also Bought
Technical Specs
JBL JRX212
Power Rating : 250 W / 1000 W
Frequency Range (-10 dB) : 60 Hz - 20 kHz
Frequency Response (±3 dB) : 80 Hz - 18 kHz
Sensitivity (@1m) : 98 dB SPL
(1w/1m)
Nominal Impedance : 8 ohms
Recommended Amplifier Power : 250 W to 500 W into 8 ohms
Maximum SPL : 128 dB
Nominal Dispersion : 90º x 50º
Crossover Frequency : 2.1 kHz
Dimensions
(H x W x D) : 584 mm x 399 mm x 325 mm
(23 in x 15.7 in x 12.8 in)
Weight : 19.5 kg (43 lb)
High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver : JBL M112-8
Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in
TS phone jack (x1); parallel
Grille : 18-gauge, powder-coated steel
Mounting & Suspension : 36 mm, dual-angle pole-mount socket
Crown XLi800
Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
Efficient forced-air cooling prevents excessive thermal buildup
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference
Specifications
Power RMS per channel: 300 Watts @ 4 Ohms / 200 Watts @ 8 Ohms
Weight: 11.4 kg
Dimensions (H x W x D): 89mm x 482mm x 315mm
JBL JRX212 Videos
There are no videos for this product.