Mackie C300Z and Yamaha PX3 Power Amplifier Package

Visit the Mackie store.

£1,385.00 inc. VAT
More on order!
No expected date set, please contact us for more information.
  • To be notified when this product becomes available enter your email address here.

Special Offers Added:

SKU: PKG-1389-25540

Mackie C300Z and Yamaha PX3 Power Amplifier Package Special Offers When bought with this product

Mackie C300Z and Yamaha PX3 Power Amplifier Package Product Description

We have put this complete Sound system together with everything you need including:

2 x Mackie C300Z Full Range Speakers
1 x Yamaha PX3 Power Amplifier
2 x Speakon to Speakon cables
2 x XLR to XLR Signal cables.

See special offers below for extra's to add to this package!

Mackie C300Z and Yamaha PX3 Power Amplifier Package Bundles

All
All

Technical Specs

Mackie C300Z

PRECISION TUNED BY THE SPEAKER BRAINS AT EAW
Eyecatch 1The new C Series passive Loudspeakers represent Mackie's first lightweight passive speakers tuned exclusively by the EAW loudspeaker engineering team. We're talking about the same team with more than 25 years of high-output loudspeaker expertise, having created loudspeaker systems for critical applications as diverse as the Super Bowl, Iron Maiden, and the Pope. And although loudspeakers for these mega-systems cost exponentially more than the stalwart C300z, many of the same concepts applied, namely: designing custom 12" LF drivers with a frequency range from 50 Hz - 3000 Hz and a 3" voice coil that can take a pounding. And a 1.75" High-Frequency titanium Driver and Horn providing a wide, controlled dispersion pattern and precise reproduction of the critical 1000 Hz - 20,000 Hz upper mid-range and high frequencies.
CROSSOVERS TUNED TO PERFECTION
Tuning a crossover (i.e. voicing a system), involves dozens of critical decisions that many manufacturers overlook. In the end, it is all about balancing the design so that you get the best subjective results from the speaker while maintaining a good technical implementation. The crossover in the C Series is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C Series loudspeakers offer natural sound at all volume levels. Read more.
ULTRA-WIDE DISPERSION
Ever been to a show where the music sounds great in front, but craps out once you get to the back or sides of the room? We have, and that's why we gave the C300z a multi-cell horn throat aperture. Sure, it's hard to say, but what it does is allow for much wider and more even dispersion of high and mid frequencies—so the wallflowers get the same great listening experience as those up front. Read more.
BETTER THAN YOUR AVERAGE BOX
Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The C300z enclosure is an asymmetrical monocoque design with no parallel surfaces, causing mid and high frequency resonance's to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing. Read more.
SUPERB FLOOR MONITOR
Aux Mode Close-upA good floor monitor plays loudly without generating feedback through vocal microphones. A poor floor monitor, on the other hand, will generate feedback just about the time you turn it up to a useable level. Floor monitor feedback is often caused by uneven frequency response and dispersion; some frequencies arrive at the microphone much louder than others. These "spikes" are what trigger feedback as the floor monitor volume is increased. The C300z has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase its volume without boosting those nasty, feedback-inducing spikes. Without extensive tuning, no passive speaker or specialized floor wedge in this class can even come close.

Portable Precision Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer
HF compression driver mounted on a multi-celled aperture, with a constant directivity horn for room-wide 90° x 45° dispersion
Precise reproduction of critical upper mid-range and high frequencies
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
Designed for optimum performance with Mackie powered mixers and power amplifiers
750W peak power handling
Three setup configurations: pole mount, flyable and wedge
Passive version of the best-selling SRM450

Frequency Response (–3 dB): 55Hz – 18kHz
Frequency Range (–10 dB): 45Hz – 20kHz
Maximum SPL Long-term @ 1m: 123dB
Crossover Frequency: 1800 Hz
AUDIO: ::
Input Type: Speakon®-style NL4 jack 1/4-inch TS phone jack
Input Impedance: 8 ohms
Power Handling: (RMS) 300 watts, (peak) 750 watts

Yamaha PX3 Power Amplifier

Output power; 1kHz Non-clip 20msec Burst Both channels driven 300W x 2
500W x 2
300W x 2
8Ω/Power Boost Mode 600W x 1
4Ω/Power Boost Mode 1000W x 1

General specifications

Sampling frequency rateInternal 48kHz
A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling
Total harmonic distortion 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Frequency response ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
S/N ratio 100dB (A-weighted, 8Ω, Gain setting = +14dBu)
Crosstalk Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Voltage Gain/Sensitivity8Ω Volume max 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu)
8Ω Volume max /Power Boost mode 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu)
Maximum input voltage +24dBu
Input impedance 20kΩ (Balance), 10kΩ (Unbalance)
I/O ConnectorsSpeaker output ports Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
Line Input XLR-3-31 x2, 1/4 "PHONE(TRS) x2
Others USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Latency 1.5 msec (Analog Input to Speakers)
Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
Protection circuitLoad protection POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
Amplifier protection Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
Power supply protection Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown
Amplifier class Class D, Balanced output circuit (BTL)
Cooling 16 step variable speed fan x 2, front to rear airflow
Power requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.
Power consumption 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling)
DimensionsW 480mm (18-7/8")
H 88mm (3-7/16"): 2U
D 388mm (15-2/8")
Net weight 6.9 kg (15.21 lbs)
Accessories USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1
Others Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C

Mackie C300Z Videos

Seen a video for Mackie C300Z and Yamaha PX3 Power Amplifier Package? Send us the URL and published videos will receive loyalty points!

There are no videos for this product.

Mackie C300Z and Yamaha PX3 Power Amplifier Package Reviews

Mackie C300Z reviews

Do you own the Mackie C300Z? Why not write a review based on your experience with it.
5
0
1
0
0
Ollie
16 January, 2016
good
These are good for bedroom djs and for back gardens but they do not lack on quality at high volumes
0 found this helpful
Sounds Great
9 January, 2016
Power
I like the power of these speakers and they sound really pro and the quality doesn't lack
0 found this helpful
hazz
6 January, 2016
amazing
built like a tank and have surprisingly good bass, two of these give ample bass to a room for 250 so very good bang for your buck especially since you don't have to buy a subwoofer
0 found this helpful
Euan
25 June, 2014
Superb Sound Quality
Very impressed with these speakers, built like a tank and have surprisingly good bass, two of these give ample bass to a room for 250 so very good bang for your buck especially since you don't have to buy a subwoofer!
0 found this helpful
Harry
28 July, 2013
good
these are good for house party dj and small venues
0 found this helpful
Jack
20 May, 2013
Can't fault these speakers they are great.
I have used these speakers for many years at live events and they are amazing very sturdy and sound awesome.
0 found this helpful

Yamaha PX3 Power Amplifier reviews

Do you own the Yamaha PX3 Power Amplifier? Why not write a review based on your experience with it.
1
0
0
0
0
Neville
28 February, 2022
Great product
Great amplifier love it
0 found this helpful

Add £50 to your order to qualify for Free Delivery.

×

Sign me up for emails

We'll send you updates on the latest offers and promotional events, inspiration and advice. As well as invites to events.

We treat your personal data with care, view our privacy notice here.

×

Mackie C300Z and Yamaha PX3 Power Amplifier Package
£1,385.00 inc. VAT
×

×

Share with your friends

Like this product on Facebook
×

Embed this products in your website

Paste the code below into your webpage or blog to embed this product in your page.

×

Share product

We treat your personal data with care, view our privacy notice here.

×

Finance Available!

0% Interest Free Finance!
0% Finance on all orders over £280
10% deposit then 12 months payment of £77.33

You can apply for finance to purchase this item. A minimum 10% deposit is required and you can opt for either 12, 24 or 36 monthly payments thereafter 17.9% APR.

Mackie C300Z and Yamaha PX3 Power Amplifier Package
from £45.22/month
×

Price Promise

We confidently offer the best prices around on our products, but we're only human so occasionally miss something.
Tell us where and we'll endeavour to lower our price for you. Simply complete this form below.

We treat your personal data with care, view our privacy notice here.