Mackie C300Z and W-Audio EPX800 Amplifier Package
Visit the Mackie store.
Mackie C300Z and W-Audio EPX800 Amplifier Package Special Offers When bought with this product
Mackie C300Z and W-Audio EPX800 Amplifier Package Product Description
2 x Mackie C300Z Full Range Speakers
1 x W-Audio EPX800 Amplifier
2 x Speakon to Speakon cables
2 x Phono to Jack Signal cables.
See special offers below for extra's to add to this package!
Mackie C300Z and W-Audio EPX800 Amplifier Package Bundles
Customers Also Bought
PRECISION TUNED BY THE SPEAKER BRAINS AT EAW
Eyecatch 1The new C Series passive Loudspeakers represent Mackie's first lightweight passive speakers tuned exclusively by the EAW loudspeaker engineering team. We're talking about the same team with more than 25 years of high-output loudspeaker expertise, having created loudspeaker systems for critical applications as diverse as the Super Bowl, Iron Maiden, and the Pope. And although loudspeakers for these mega-systems cost exponentially more than the stalwart C300z, many of the same concepts applied, namely: designing custom 12" LF drivers with a frequency range from 50 Hz - 3000 Hz and a 3" voice coil that can take a pounding. And a 1.75" High-Frequency titanium Driver and Horn providing a wide, controlled dispersion pattern and precise reproduction of the critical 1000 Hz - 20,000 Hz upper mid-range and high frequencies.
CROSSOVERS TUNED TO PERFECTION
Tuning a crossover (i.e. voicing a system), involves dozens of critical decisions that many manufacturers overlook. In the end, it is all about balancing the design so that you get the best subjective results from the speaker while maintaining a good technical implementation. The crossover in the C Series is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C Series loudspeakers offer natural sound at all volume levels. Read more.
Ever been to a show where the music sounds great in front, but craps out once you get to the back or sides of the room? We have, and that's why we gave the C300z a multi-cell horn throat aperture. Sure, it's hard to say, but what it does is allow for much wider and more even dispersion of high and mid frequencies—so the wallflowers get the same great listening experience as those up front. Read more.
BETTER THAN YOUR AVERAGE BOX
Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The C300z enclosure is an asymmetrical monocoque design with no parallel surfaces, causing mid and high frequency resonance's to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing. Read more.
SUPERB FLOOR MONITOR
Aux Mode Close-upA good floor monitor plays loudly without generating feedback through vocal microphones. A poor floor monitor, on the other hand, will generate feedback just about the time you turn it up to a useable level. Floor monitor feedback is often caused by uneven frequency response and dispersion; some frequencies arrive at the microphone much louder than others. These "spikes" are what trigger feedback as the floor monitor volume is increased. The C300z has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase its volume without boosting those nasty, feedback-inducing spikes. Without extensive tuning, no passive speaker or specialized floor wedge in this class can even come close.
Portable Precision Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer
HF compression driver mounted on a multi-celled aperture, with a constant directivity horn for room-wide 90° x 45° dispersion
Precise reproduction of critical upper mid-range and high frequencies
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
Designed for optimum performance with Mackie powered mixers and power amplifiers
750W peak power handling
Three setup configurations: pole mount, flyable and wedge
Passive version of the best-selling SRM450
Frequency Response (–3 dB): 55Hz – 18kHz
Frequency Range (–10 dB): 45Hz – 20kHz
Maximum SPL Long-term @ 1m: 123dB
Crossover Frequency: 1800 Hz
Input Type: Speakon®-style NL4 jack 1/4-inch TS phone jack
Input Impedance: 8 ohms
Power Handling: (RMS) 300 watts, (peak) 750 watts
W-Audio EPX800 Amplifier
2 x 400W @ 4Ω
2 x 270W @ 8Ω
Short circuit, overload and thermal protection
Inputs: 2 x phono sockets, 2 x 1/4” jack sockets
Outputs: 2 x locking speaker connectors, 2 x binding posts
Mackie C300Z Videos
There are no videos for this product.