Martin RUSH MH 2 Wash

Features LED wash light moving head Compact yet powerful RGBW color mixing 20o fixed beam angle Extremely fast and agile Electronic dimming and strobe 3 & 5 pin XLR Physical Length: 258 mm (10.2 in.) Width: 156 mm (6.1 in.) Height: 305 mm (12.0 in.) Weight: 5.7 kg (12.6 lbs.) Dynamic Effects Color mixing: RGBW Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout Electronic dimming: 0 - 100%, four dimming curve options Pan: 540° Tilt: 270° Control and Programming
Control options: DMX, stand-alone
DMX channels: 12
Stand-alone trigger options: Music trig, auto trig
Stand-alone options: 4 pre-programmed shows
Stand-alone memory: 20 scenes
White balance control: RGB adjustment
Setting and addressing: Control panel with LCD display
Protocol: USITT DMX512/1990
Optics
Beam angle: 20°
Light source: 7 x 10 W Cree XP-E RGBW LEDs
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Manufacturer´s figure obtained under manufacturer´s test conditions
Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Installation
Mounting points: Hex bolts
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 135 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Included Items
Power cable 1.5 m (4.9 ft.)
Ordering Information
RUSH MH 2 Wash™ in cardboard box