Martin RUSH MH 1 Profile
180W LED Moving Head Light
Visit the Martin store.
SKU: DJK15093
Special Offers When bought with this product
Product Description
The Martin RUSH MH 1 Profile is a super bright LED profile moving head with efficient optics punches out a variety of effects and colors from two gobo wheels and two color wheels. For added versatility and effect, it also houses an electronic dimmer and strobe, iris and 3-facet prism.
Bundles
Technical Specs
Features
LED profile moving head
Super bright - efficient optics
Rotating gobo wheel
Fixed gobo wheel
2 x color wheels
Electronic dimming and strobe
Iris and 3-facet prism
3 & 5 pin XLR
Physical
Length: 418 mm (16.5 in.)
Width: 328 mm (12.9 in.)
Height: 588 mm (23.1 in.)
Weight: 18 kg (39.7 lbs.)
Dynamic Effects
Color wheel 1: 7 colors plus open, rotation with variable direction and speed
Color wheel 2: 7 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo indexing, rotation and shake
Static gobo wheel: 8 gobos plus open, wheel rotation and shake
Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout
Prism: Indexing and rotation with variable direction and speed
Iris: Motorized
Focus: Motorized
Electronic dimming: 0 - 100%, four dimming curve options
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
Control options: DMX, stand-alone
DMX channels: 17
Stand-alone trigger options: Music trig, auto trig
Stand-alone sequences: 4 pre-programmed shows
Stand-alone memory: 20 scenes
Music trig sensitivity: Adjustable
Setting and addressing: Control panel with backlit LCD display
DMX compliance: USITT DMX512/1990
Optics
Light source: 180 W LED engine
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Manufacturer´s figure obtained under manufacturer´s test conditions
Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Installation
Mounting points: Two quarter-turn brackets for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 350 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Thermal
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Included Items
Power cable, 1.5 m (4.9 ft.), without mains plug
Ordering Information
RUSH MH 1 Profile™ in cardboard box
