Mackie SRM Powerpack # 2 V2 - 1400WRMS Active Sound System
Visit the Mackie store.
SKU: DJK03376
Mackie SRM Powerpack # 2 V2 - 1400WRMS Active Sound System Special Offers When bought with this product
Mackie SRM Powerpack # 2 V2 - 1400WRMS Active Sound System Product Description
A complete PA package comprising:
2 x Mackie SRM450 v2 Active 12'' Speakers
1 x Mackie SRM1801 18'' Active Subwoofer
2 x Speaker Stands
4 x XLR to XLR 6m signal cables
Power Output
Total: 1,400Watts - 1,400WRMS
Mackie SRM Powerpack # 2 V2 - 1400WRMS Active Sound System Bundles
Technical Specs
• High-output precision titanium compression driver
• Neodymium long-throw low frequency transducer with 3-inch voice coil
• Servo Feedback controlled woofer for tight low-end punch
• 300W class-D, Fast Recovery LF amp / 100W HF amp
• Ultra-wide, smooth dispersion via multi-cell horn aperture and HF waveguide
• Built-in phase-accurate 24dB Linkwitz-Riley electronic crossover
• Mackie Active Electronic time alignment, phase correction and EQ for studio quality sound
• Mic/line input and pass-thru connector
• Lightweight for ultimate portability (40lbs)
• Flyable, Pole Mountable, Floor Wedge-able
The 'SRM' Stands for Sound Reinforcement Monitor
Over a decade ago, Greg Mackie and a dedicated team of engineers set out to create a portable loudspeaker that could deliver studio monitor sound quality. Unlike a relatively small, acoustically controlled studio where the 'sweet spot' is well defined, live venues vary greatly, and most are far from acoustically balanced. Despite the challenges, after two years of extensive research and development, the first Sound Reinforcement Monitor was born—a loudspeaker that truly lived up to its name. The SRM450v2 continues the SRM450's tradition of studio monitor sound quality—and trumps it—to deliver sound that makes any venue seem like a well-tuned studio.
Ultra-Wide Dispersion
Undoubtedly you've been to a show where the sound is all over the map—stand in front of the band, it sounds okay, but move a little to your left or right and all of a sudden you've got mud in your ears. When the SRM450v2 loudspeakers are on stage, no matter where you stand, you hear sound with impeccable stereo imaging, depth of field and definition—at full-on loudspeaker levels. This is due to the SRM450v2's wide dispersion pattern, which is achieved through its multi-cell horn throat aperture. To those of you whose eyes just glazed over, let's just tell you what it does—the multi-cell horn throat aperture allows for much wider and more even dispersion of high and mid frequencies, so whether you're listening intently front and center, or playing it cool on the perimeter, you'll hear the same great mix.
Stunning Bass via Servo Feedback Controlled, all new Neodymium Woofer
Many portable loudspeakers produce lows that lack substance—they just don't have it in ‘em to give you that chest-pounding punch. But the SRM450v2 delivers astonishingly deep and defined bass frequencies. In fact, it outperforms the original SRM450, which was renowned for its ability to deliver real low-down sound. That's thanks to the SRM450v2's servo feedback technology combined with its all-new neodymium woofer and 3-inch voice coil.
Based on Mackie's award-winning HR824mk2 studio monitor technology, the servo feedback damping electronic circuit within the SRM450v2 'locks' the woofer in place with the positive and negative outputs of the amplifier. This creates a solid direct-coupling that allows the SRM450v2 to deliver extremely deep bass from a small cabinet. And the new neodymium woofer's magnet is lighter in mass, therefore faster than ceramics, giving the SRM450v2's bass more punch. The new longer 3-inch voice coil allows the woofer to handle heat more efficiently, so it produces a consistently full dynamic range—even at maximum output. So you get full, thumping, detailed lows, even after long hours of use at near-peak volumes.
Super low distortion thanks to Mackie's own Class-D, Fast Recovery Amplification With its combination of Class D topology and Fast Recovery circuitry, the SRM450v2 operates with incredible efficiency, and delivers much more power and clarity. With this 'Class D Fast Recovery amplification,' as we've lovingly (and creatively) dubbed the technology, the SRM450v2 handles maximum volume—and associated heat—with ease, so there's no unwanted noise, and no thermal problems. Even after hours of sustained use at near-peak levels, your sound remains clean and your SRM450v2 keeps cool.
Legendary Active Electronics
In a passive loudspeaker setup, an external amplifier is connected to a passive crossover inside the speaker, which distributes frequencies to the transducers. Because power amps and transducers vary widely in sound and quality, trying to match the right power amp with the right speaker can be challenging, especially if you're not a professional acoustic technician—or rolling in cash so you can hire one. Our proven Active design does all the work for you. With our SRM450v2, you get a complete loudspeaker system, with complex electronics and carefully chosen components, all precisely tuned and tweaked to work together. The result is a loudspeaker with phenomenal sound quality and power, that's completely plug-and-play—no EQ needed.
Built-in Protection Circuitry for Long Life
We know our Active loudspeakers are pushed hard—often to, or beyond, the limit. That's why we have reliable protection circuitry built in to every one. The SRM450v2 employs a built-in limiter for less distortion at peak levels, and an automatic sliding high pass filter to give you that little bit extra volume when the crowd demands more. And thanks to the advanced technology of its power supply and Class-D amp topology, the SRM450v2 is greater than 90 percent efficient—more of the power from your outlet goes straight to the transducer, without the power supply and amp giving off loads of heat. Less heat means better performance, and longer life.
Versatile, Portable, Tough—And They Look Good, Too
When designing the SRM450v2, we considered every angle. From every angle is just how you can position it, too—pole-mount it from the bottom, fly it vertically or horizontally via its integrated M10 mounting points, or use it as a wedge monitor. With all this flexibility, it's the most versatile portable Active loudspeaker around. And now moving it into place is easier than ever. Weighing in at about 40 pounds—11 pounds lighter than the original SRM450—you'll have plenty of strength left over to play after loading in. Plus, the SRM450v2 retains its rugged, Mackie 'built-like-a-tank' durability, thanks to the polypropylene cabinet—now in a tasty hue of Midnight Blue. So not only do you get a portable loudspeaker that sounds phenomenal, you get one that's tough and portable for the road, and handsome enough for the show.
Sometimes you need all the bottom-end you can get. That's where the Mackie SWA1501 Active Subwoofer System comes in. The SWA1501 features an internal 500-Watt Mackie FR (Fast Recovery) Series amplifier and a high-precision 15" transducer, custom designed for optimal performance with the amp and enclosure. Onboard Mackie Active electronics ensure seamless integration of the amplifier and transducer at all times, creating a system that is highly efficient and versatile.
TRUE ACTIVE SUBWOOFER
Active doesn't just mean the SWA1501 has an amplifier bolted on its back—it means optimized electronics that provide complete control and maximum performance over all components. The onboard Active system controls the crossover filters, equalization, protection for the transducer and electronics, and provides real time vigilance over the entire system. There is simply no way that you can get this kind of full system functionality by strapping an amp on the back of a passive speaker box.
BUILT-IN CROSSOVER
Connecting and setting up the SWA1501 is a breeze. It accepts a stereo or mono line-level signal via female XLR input jacks. Male XLR Thru jacks are provided for daisy-chaining the signal to additional SWA1501 cabinets. The built-in crossover routes the high frequency content to the high-pass output jacks, which can be used to feed the inputs of full-range Active speakers, such as those in the SRM Series, or an amplifier powering a pair of passive speakers. A Subwoofer Level control lets you adjust the balance between the subwoofer and the full-range speakers.
The Mackie SRM1801 Features:
* 1000W of ultra-efficient Class-D Fast Recovery amplification
* Mackie Active electronics provide total system optimisation
* Precision crossover (125Hz)
* Tuning filters for accurate bass response
* 18-inch woofer delivers superior output and low- frequency extension
* Dual XLR inputs for mono or stereo applications
* Stereo high-pass and full range outputs
* User-adjustable level and polarity controls
* Individual power, signal, OL, and thermal protect indicators
* Pole receptacle for mounting full-range loudspeakers
* Solid plywood enclosure with high-durability, textured black paint
* Extremely lightweight and portable (73 lbs / 33.1 kg)
Mackie SRM Powerpack # 2 V2 - 1400WRMS Active Sound System Videos
There are no videos for this product.