HomeDisco LightsLaserworld PRO-1300 RGB

Laserworld PRO-1300 RGB

RGB laser light system with output power of 1300mW

Visit the Laserworld store.

In stock
Get it by Tuesday
Special Offers Added:

SKU: DJK16221

Laserworld PRO-1300 RGB Special Offers When bought with this product

Laserworld PRO-1300 RGB Product Description

The Laserworld PRO-1300RGB is a white light RGB laser light system with a total output power of up to 1300mW. It not only is equipped with fast scanners for great projections, it also comes with the super bright 637nm red, that is visible several times better than the 650nm plus has a thinner, more accurate beam profile. Therefore the PRO-1300RGB ensures great visibility and is suitable for beam as well as for graphics projections.
The very advantage of the projectors of the Proline Series is the integrated Glass Effects Actuator: The systems not only run in normal scanner mode. Similar to an optical bench they are equipped with additional grating effects. Without the effects it is possible to show emotionalizing beam shows as well as graphis projections. Through DMX control three different grating effects can be chosen:

Laserworld PRO-1300 RGB Bundles

All
All

Technical Specs

Integrated Effects:

1. Normal scanner mode – creates emotionalizing beam shows and graphics projections

2. Burst Grating mode – the scanned pattern is multiplied many times and covers a wide range

3. 3D Effect mode – creates a great 3D-looking effect on the scanned pattern

4. Radial Pattern Effect mode – A pattern i
s displayed in the center, the effect shows a multitude of this projection in circles around the center projection

Computer control:
The Laserworld PRO-1300RGB has an ILDA interface for professional computer control. Thus own or pre-programmed lasershows can be displayed by use of a laser control software, e.g. of Phoenix or Pangolin.
DMX Mode:
Through DMX preset patterns, like waves, tunnels, circles etc. can be projected in different colors and at various speed.

Automatic Mode:
The laser system has an automatic mode, which runs the pre-programmed patterns automatically.

Music Mode:
If the music mode is active, the laser system projects according to the sound. The microphone sensitivity can easily be adjusted at the rear side of the projector.

The rugged housing of the PRO-1300RGB is very compact and has dimensions of only 29 x 20 x 13,5 cm (W/B/H). A special feature of the housing is the mounting bracket that allows to fasten the unit in about 360 turns around the mounting axis of the bracket. This feature makes a fixed installation very easy.
The microphone for the sound-to-light reception and the status LEDs are located at the front panel of the PRO-1300RGB, next to the laser aperture. In the sound-to-light mode the MIC LED on the front side is flashing when the microphone receives sound triggers. A second LED lights if the laser is in operation mode.

On the rear side of this laser device, a variety of features can be set and different interfaces can be used. In addition to the power connection socket and an on/off switch there are interfaces for DMX in and out, ILDA in and out and for Interlock connection. In case of an active ILDA connection a green LED lights next to the ILDA interface. An integrated key switch prevents the laser system against unauthorized use. The PRO-1300RGB is equipped with a beam block "Scan Fail Safety", that can be switched on/off on the back panel as well. In active state this prevents the laser from projecting single beams.

Two rotary buttons on the rear side of the device allow adjustement of the pattern size and the sensitivity of the microphone. Furthermore there are dip switches for setting the different operation modes and DMX address. Finally a special loop for a safety cord has been integrated.

The PRO-1300RGB is equipped with red and blue diode laser modules and a green DPSS laser module. The red diode has a wavelength of 637nm for very good visibility at great beam specifications. Togehter with the green DPSS laser module with a wavelength of 532nm and the royal-blue diode laser module with a wavelength of 445nm the laser sources create brilliant colors and form a powerful source for the PRO-1300RGB.
The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of about 1.3mrad. At the same time it offers a galvo system with up to 40kpps with a max. scan angle of 40 and a deflection angle for the grating effects of up to 80.
The Laserworld PRO-1300RGB is a powerful whitelight laser system. This device is well suited for private use and professional applications and it is ideal for use in medium to larger sized clubs, discos and nightclubs or in other party locations. It is also a great solution for mobile DJs and rental companies.

Technical Specifications:
min. typ.
total power: 1000mW 1300mW
power red: >200mW / 637nm
power green: >200mW / 532nm
power blue: >600mW / 445nm

beam specs (full angle): ca. 3mm / ca. 1,3mrad
laser source: Diode, DPSS Laser
laser class: 4
operation modes: auto, music, DMX, ILDA
scanner: Galvo system, up to 40kpps @4
scan angle: 40 / 80 max.
basic patterns: layers, tunnels, fences, waves etc.; grating & 3D effects
accessories: power cable, manual, interlock connector, key
power supply: 85V - 250V AC
power consumption: 50 W
dimensions: 290/200/135 mm
weight: 4,7 kg

Laserworld PRO-1300 RGB Videos

Seen a video for Laserworld PRO-1300 RGB? Send us the URL and published videos will receive loyalty points!

Laserworld PRO-1300 RGB Reviews

Do you own the Laserworld PRO-1300 RGB? Why not write a review based on your experience with it.

Laserworld PRO-1300 RGB Questions

Considering purchasing the Laserworld PRO-1300 RGB? Have questions? Ask people who've recently bought one.

Add £50 to your order to qualify for Free Delivery.

×

Sign me up for emails

We'll send you updates on the latest offers and promotional events, inspiration and advice. As well as invites to events.

We treat your personal data with care, view our privacy notice here.

×

Laserworld PRO-1300 RGB
RGB laser light system with output power of 1300mW
×

Delivery And Stock Information

Free next working day delivery on all orders placed before 3:30pm Monday to Friday.

Orders placed at the weekend or after 3.30pm on Friday will be delivered on the following Tuesday.

Free next day delivery applies only to the UK mainland. Other locations will be charged as follows:

    • Highlands and Islands 2-3 Days* + £25
    • Northern Ireland 2-3 Days* +£10
    • Deliveries will be made subject to the terms and conditions of the courier company. djkit.com will not be held responsible for late deliveries.

In the event that the items ordered are unavailable for next day delivery, you will be contacted by djkit.com to arrange a suitable delivery date.

"In stock" means that the product displayed is either in stock with ourselves or our suppliers and is available for delivery. Stock levels are subject to change without prior notice.

×

Share with your friends

Like this product on Facebook
×

Embed this products in your website

Paste the code below into your webpage or blog to embed this product in your page.

×

Share product

We treat your personal data with care, view our privacy notice here.

×

Finance Available!

0% Interest Free Finance!
0% Finance on all orders over £280
10% deposit then 12 months payment of £32.10

You can apply for finance to purchase this item. A minimum 10% deposit is required and you can opt for either 12, 24 or 36 monthly payments thereafter 17.9% APR.

Laserworld PRO-1300 RGB
from £18.77/month
×

Price Promise

We confidently offer the best prices around on our products, but we're only human so occasionally miss something.
Tell us where and we'll endeavour to lower our price for you. Simply complete this form below.

We treat your personal data with care, view our privacy notice here.