Pure Diode Professional Laser
Visit the Laserworld store.
Special Offers When bought with this product
The SwissLas Pure Micro Series sets new standards in terms of high power lasers in extremely small housings. The SwissLas Pure Micro PM-2400RGB is equipped with the very latest SwissLas diode technology and extremly advanced Xscan galvos.
The diode modules used for the Pure Micro projectors are Swiss Made and have the special beam shaping and collimation of Swisslas to ensure great beam precision.
No matter if graphics projections, beam shows or professional advertising - the Pure Micro units work on highest professional level.
Like all Pure Micro systems, the PM-2400RGB has trim pots on the back side of the housing for color balancing and x/y shift and they come with professional ILDA interface. The complete projector is built with Sealed Housing Technology and is cooled through the exterior cooling fins (bottom part).
The very small housing (18,6 x 16,5 x 12,5cm) and the very low weight makes this unit very versatile: Just carry several Pure Micro units in your hand luggage to your laser shows all over the world! Of course the Pure Micro units respect the very latest safety regulations according to IEC-60825 - and even beyond those: The Xscan come standard with Advanced Scan Fail Safety.
The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of about 1.0mrad. There is a guaranteed output power of 2,200mW and a typical output power of 2,600mW.
total power: 2.200mW* 2.600mW
* output power after optics
power red: >320mW ** / 638nm
power green: >1.000mW ** / 532nm
power blue: >1.000mW ** / 450nm
** output power at laser source
beam specs (full angle): ca. 3mm / 1,0mrad
laser source: Diode, DPSS Laser
laser class: 4
operation modes: ILDA
scanner: Xscan Galvo System, [email protected]° ILDA
as uprgrade available
CT-6210HP,>[email protected]° ILDA
scan angle: 60° max.
accessories: External PSU, manual
power supply: External 24V DC>5A for 85-250V AC 50/60Hz
power consumption: 90 W
dimensions: 185/165/125 mm
weight: 3,2 kg
special remarks: Trim pots for X/Y positioning and color balance, Laser safety according to EN 60825: Interlock through ILDA, advanced scan fail safety
There are no videos for this product.