iSolution technology allows synchronisation of different types of intelligent iSolution fixtures via either a custom-built iLead DMX-512 controller or in stand-alone mode. iLead (Integrated Lighting System) allows fixtures to be linked and work in synchronisation, regardless of type, including iLead-equipped scanners, moving heads, and colour changers. The iLead controller can also remotely set the DMX addresses of the fixtures. All units are also controllable via any universal DMX-512 controller. Conversely, the iLead controller is a universal DMX-512 controller and can be used with non-iSolution fixtures
Setting and addressing : 4 x 7 segment blue LED display. LED display with on/off setting function. Data in/out : Locking 3-pin XLR iSolution operation Consistent DMX configuration enables iMove series to be linked with iRock, iShow and other iSolution effectsRemote DMX Addressing (RDA): DMX address can be set remotely by iLead controllerWhen the DMX signal is absent, the iMove will switch to Stand Alone mode automaticallyEasy installation, easy addressing, and easy operation. Pre-programmed function Stand alone modeBuilt in dynamic lighting shows for instant operationUser friendly easy controller (CA-8): has various lighting shows at your fingertipsPan: 540 degrees / 270 degrees Automatic PAN/TILT Correction. CMY Mixing system Cyan: 0 - 100%, Magenta: 0 - 100%, Yellow: 0 - 100% Colour wheel 6 trapezoid dichroic colours plus white Rainbow effect in both directions Effect Wheel Frost filter and diagonal lens Dimmer/ Shutter 0 - 100% dimmer. Independent shutter/ variable speed strobe High quality lens and dichroic coloursAuto focus Specification: Power supply: 230vLamp: MSD250 / NSD 250Replacement lamp: Lamp80 Dimensions 428 x 387 x 491mm Weight 30.5kgs
Seen a video for iSolution iMove 250W?
Send us the URL and published videos will receive loyalty points!
There are no videos for this product.
Do you own the iSolution iMove 250W? Why not write a review based on your experience with it.