HK Audio Elements Band Pack One

HK Audio Elements Top Mid/High Cabinet (E 435):

The mid / high unit 435 is equipped with four specially equipped for ELEMENTS developed 3.5 "high-performance loudspeakers. The arrangement of these four speakers in a vertical line is a very even distribution of the volume and frequency of the image on the loudspeaker will be public space achieved.

A column system can contain up to four mid / high units that are connected via e-Connect quickly and reliably.

(E 435)Features/Specifications:

• Scalability mid / high unit with line array technology
• homogeneous and focused coverage
• Durable aluminum housing
• E-Connect signal connection

Further Specs:

• Rated power (RMS): 150 W RMS
• Frequency response: -10 dB 140 Hz - 20 kHz, about integirerten active filter system
• Nominal impedance: 16 ohms
• Sensitivity: 1W / 1m 97 dB, all measurements in Half-Space
• E-Connect connectors: 1x in, 1x E-Connect out
• Speakers: 4 x 3.5 "full range speaker
• Directivity: 70° horizontal
• Crossover frequency: 140 Hz, 12 dB / oct
• Dimensions (WxHxD): 11 x 38 x 12 cm * 15 * x 4-7/16 x 4-3/4 "

Please Note: 4x E435's are included in this package.

HK Audio Elements 10" Active Sub (E110SA)

The handy 10 "subwoofer delivers a precise and deep bass foundation. It is equipped with a 600-watt Class D amplifier that can power up to two additional heads or another passive sub.

Equipped with two e-Connect recordings, is the sub, either standing or lying on the floor, as the basis for other elements. For convenient transportation makes the top-side handle.

(E110SA) Features/Specifications:

• Very compact and efficient
• Parallel connection of max. two E 435 mid / high units and a passive subwoofer
• 2 filter system (selectable depending on the number of connected lines in a mid / high units)
• 2x E-Connect Systemflansch with integrated signal connection

Further Specs:

• Frequency Response: -10 dB 45 Hz - 150 Hz, via active crossover system
• Subwoofer Amplifier 1x 600 W / D @ 4 ohms Class
• Active protection circuits: RMS limiter, subsonic filter, filter system, 2-fold, depending on the number of connected mid-high units
• Connectors: 1x XLR Combi In, 1x Out XLR, XLR parallel Out., 2x E-Connect out
• Bass Speaker: 1x 10 "
• Dimensions (WxHxD) 30 x 48 x 46 cm x 18-7/8 x 18-1/8 - 11-13/16 "

Please Note: 2x E110SA's are included in this package

HK Audio Elements Pole Mount (EP1)

With the e-Connect-distance rod EP 1, it is possible to adjust one or more mid / high units at a certain height on the stand or the EF 45-amp system EA 600th.

The spacer bars are up to a length of 1.60 m (EP 2 = 60.5 cm) - infinitely adjustable and is fixed by a screw cap to the desired height. The ingenious Elements design, means speakers need only be mounted to this stand and the EF45 (available separately) base in order to have uncluttered connection (cable free)

With HK Audio's E-Connect, a unique new type of integrated coupler/bus, you can configure your Elements rig far more easily and quickly than conventional systems. Just a few minutes are all it takes to set up an Elements system. Simply snap the components together, automatically linking them via E-Connect, plug in your signal source, and let the show begin.

(EP1) Features/Specifications:

• Anodized aluminum with large locking screw
• Height adjustable from 95-160 cm (EP 2 = 40 to 60.5 cm)
Integrated e-connect signal connection
• very low weight (0.8 kg = EP 1)

Please Note: 2x EP1's are included in this package.

Important:

Additional connectors will be required.