FBT Verve 115MA
Processed Active Reinforcement Monitor 400W + 100W RMS – 131dB SPL
Visit the FBT Audio store.
FBT Verve 115MA Special Offers When bought with this product
FBT Verve 115MA Product Description
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
Bi-amplified models with high dynamic Class D amplifiers 400W + 100W RMS to provide a pleasant sound even at loud volume
New ultra-light woofers custom made for FBT with a weather resistant coating, extremely reliable and efficient
High efficiency switch mode power supply
Advanced filter algorithms including dynamic equalization at low frequencies and advanced energy control to allow high SPL while always granting reliable and distortion-free audio reproduction
An increase in total SPL thanks to FBT’s new digital limiter algorithms and increased amplifier power output
Passive models: soft-trip high-frequency protection circuitry to ensure proper operation even in overdriven conditions and superb quality components, metallic polyester condensers and large diameter coils. All components embedded in special resin to ensure total immunity to vibration
Fully rotatable constant directivity horn to adjust HxV angle coverage in the non-coaxial models
Ergonomic integrated carrying handles, M10 rigging points, top-hat speaker stand socket and wall bracket mounting hardware.
2 x 320 mm (12”) woofer with 64 mm (2.5”) voice coil, custom made for FBT.
36 mm (1.4”) B&C compression driver with 64 mm (2.5”) voice coil.
Frequency response from 50Hz to 20 kHz.
70°H x 50°V Constant Directivity Horn.
2-way, bass-reflex, bi-amplified.
400W RMS LF, 100W RMS HF, Class D power amplifiers.
380 mm (15”) custom woofer with 64 mm (2.5”) voice coil.
25 mm (1”) B&C compression driver with 44 mm (1.7”) voice coil.
Digital Signal Processor with 4 Equalization Presets.
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing.
Frequency response from 57Hz to 20 kHz.
Control Panel: balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3.
status LED indicators.
90° omnidirectional angle dispersion.
Wall bracket mount flange plate, 35 mm (1 3/8”) top-hat speaker stand socket, two integrated handles.
FBT Verve 115MA Bundles
Built-in amplifier LF/HF:400/100w RMS
Built-in amplifier peak LF/HF:800/200w
Frequency response:57Hz - 20kHz
Low Frequency woofer:15" with 2.5" VC
High Frequency driver:1"
Maximum SPL cont/peak:125.5 / 131dB
Dispersion:90 x 90 (HxV)
AC Power requirements:450VA
Input connector:XLR with link out
Power cord:5m IEC
Net Dimension (WxHxD):620 x 360 x 470mm
Transport Dimension (WxHxD):717 x 512 x 595mm
FBT Verve 115MA Videos
There are no videos for this product.