FBT Ventis 206A

The VENTIS 206 and 206A can be deployed as a front fill, an under-balcony fill or as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 and 206a has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio. 

The enclosures are as suitable for fixed installation as they are for use on the stage.

M10 mounting points are included as standard while an optional U-bracket can be used for wall-mounting.

For use on the road, the  VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.

2-way, bi-amplified, bass reflex design

Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF

Digital Signal Processor with graphic display

15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing

High efficiency switch mode power supply

Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push

2x165mm (6.5”) LF woofer with 38mm (1.5”) voice coil, custom made for FBT

25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil

Frequency response from 70Hz to 20 kHz

70°H x 50°V Constant Directivity Rotatable Horn

6 x M10 suspension points, wall bracket mount thread, 35mm (1 3/8”) top-hat

One integrated handle

12mm (0.47”) birch plywood scratch resistant enclosure and internal bracing