FBT MITUS 215A
2-way, bi-amplified, bass-reflex design
Visit the FBT Audio store.
FBT MITUS 215A Special Offers When bought with this product
FBT MITUS 215A Product Description
The FBT MITUS 215A two-way bi-amplified speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°.
The FBT MITUS 215A shall meet the following performance criteria: Frequency response of 42Hz to 20kHz, Maximum SPL of 136dB, 1100W RMS + 250W RMS class D amplifiers.
The FBT MITUS 215A provides a DSP with 6 EQ presets. The FBT MITUS 215A feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.
The control panel provides XLR input & link, level, preset, delay, HP filter.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215Aspeaker to be surface mounted on ceilings.
FBT MITUS 215A Bundles
Code: 35960 Configuration: 2 Way Built-in amplifier LF/HF: 1100/250w RMS Built-in amplifier peak LF/HF: 2200/500W Frequency response: 42Hz - 20kHz Low Frequency woofer: 2x 15 High Frequency driver: 2 Maximum SPL cont/peak: 133 / 136dB Dispersion: 60 x 40 (HxV) Input impedance: 22kohm Crossover Frequency: 1.2kHz AC Power requirements: 800VA Input connector: XLR with link out Power cord: 5m PowerCon True1 Net Dimension (WxHxD): 493 x 1245 x 471mm Net Weight: 52.5kg Transport Dimension (WxHxD): 618 x 1355 x 610mm Transport Weight: 58kg
FBT MITUS 215A Videos
There are no videos for this product.