FBT MITUS 215
Passive Reinforcement speaker 1600W/4ohm – 138dB SPL
Visit the FBT Audio store.
FBT MITUS 215 Special Offers When bought with this product
FBT MITUS 215 Product Description
The FBT MITUS 215 two-way passive reinforcement speaker system shall incorporate 2 x 15” B&C neodymium woofer with 3” voice coil and 2” exit B&C neodymium driver with 2.5” voice coil coupled to a rotatable 60° x 40° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 100°.
The FBT MITUS 215 shall meet the following performance criteria: Frequency response of 47Hz to 20kHz, Frequency sensitivity of 103dB, Maximum SPL of 138dB, Recommended power amplifier 1600W RMS / 4 Ohm.
The FBT MITUS 215 passive speaker feature 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with antiresonance spacers and exclusive synthetic cloth to protect the drivers.
The hi-grade passive internal crossover featuring «soft-trip» circuitry protection of the LF woofer and HF driver. Input connectors shall be parallel wired Neutrik NL4 speakon.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 215 speaker to be surface mounted on ceilings
FBT MITUS 215 Bundles
Frequency response:47Hz - 20KHz
Low Frequency woofer:2x 15" with 3" VC
High Frequency driver:2" with 3" VC
Maximum SPL cont/peak:134/138dB
Dispersion:60 x 40 (HxV)
Input impedance:4 ohm
Input connector:2x Speakon NL4-MD-V In & Thru
Net Dimension (WxHxD):493 x 1245 x 471mm
Transport Dimension (WxHxD):618 x 1355 x 610mm
FBT MITUS 215 Videos
There are no videos for this product.