FBT MITUS 112A
Active Speaker 600W + 300W RMS - 133dB SPL
Visit the FBT Audio store.
-
To be notified when this product becomes available enter your email address here.
SKU: DJK25292 • EAN: 8034138317596
Special Offers When bought with this product
Key Features
The FBT MITUS 112A is a two-way bi-amplified speaker system shall incorporate 1 x 12” B&C neodymium woofer with 3” voice coil and 1” exit B&C neodymium driver with 1.7” voice coil coupled to a rotatable 80° x 50° horn; thanks to the rotatable HF horn it is possible to create horizontal arrays of 2 enclosures for a total coverage of 130°.
The FBT MITUS 112A shall meet the following performance criteria: Frequency response of 50Hz to 20kHz, Maximum SPL of 133dB, 600W RMS + 300W RMS class D amplifiers. The FBT MITUS 112Aprovides a DSP with 8 EQ presets.
- 2-way, bi-amplified, bass-reflex design
- 320 mm (12’’) B&C neodymium magnet woofer with 75 mm (3’’) voice coil
- 25 mm (1’’) exit B&C neodymium magnet HF driver with 44 mm (1.7’’) voice coil with 80°H x 50°V rotatable horn
- Class D amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply
- Frequency response from 50Hz to 20KHz
- DSP with 8 eq presets
- Control panel with XLR input and link, volume, presets, HPfilter, ground-lift
- 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish
- Eight M10 fly points, 35 mm (1.38’’) speaker stand socket and two FBT design aluminium handles
- Ideal for live sound reinforcement applications as both front of house main PA, and as a stage monitor. Also suited for permanent installations
- Very lightweight, only 20Kg
The FBT MITUS 112A features 0.59" baltic birch plywood construction covered in a scratch & scuff resistant black finish; the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers.The control panel provides XLR input & link, level, preset, HPfilter and GND lift.
The 12 M10 anchoring points built into the cabinet allow the FBT MITUS 112A speaker to be surface mounted on ceilings and a standard 1.38" speaker stand socket allows the FBT MITUS 112Ato be mounted on speaker stands.
Bundles
Product Description
| Code: | 31759 |
| Configuration: | 2 way |
| Built-in amplifier LF/HF: | 600/300 W RMS |
| Built-in amplifier peak LF/HF: | 1200/600 W |
| Frequency response: | 50Hz - 20Khz -6dB |
| Low Frequency woofer: | 1x12 - 3coil neodymium inch |
| High Frequency driver: | 1x1 - 1.7 coil inch |
| Maximum SPL cont/peak: | 126/133 dB |
| Dispersion: | 80°x50° HxV |
| Input impedance: | 22 Kohm |
| Crossover Frequency: | 1.5 KHz |
| AC Power requirements: | 640 VA |
| Input connector: | XLR with loop |
| Power cord: | 5/16.4 m/ft |
| Net Dimension (WxHxD): | 300x660x380 - 15x26x15 mm/inch |
| Net Weight: | 20/45 Kg/lb |
| Transport Dimension (WxHxD): | 485x495x750 - 19.1x19.5x29.5 mm/inch |
| Transport Weight: | 22/48.5 Kg/lb |
Videos
There are no videos for this product.
