db Technologies INGENIA IG2T
2-Way Active Speaker 800 W
Visit the db Technologies store.
Special Offers When bought with this product
The INGENIA IG2 T is equipped with 2 premium 8" low frequency transducers and 1 1"compression driver. All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one. Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility. Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs levels and imput devices. .INGENIA can be easily and safely coupled through a LP-IG accessory which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation. Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array.
Technical Data Speaker Type 2-Way Active Speaker Acoustical data Frequency Response [-10dB]59- 20.000 Hz Frequency Response [-6dB]63- 19.200 Hz Max SPL128 dB HF1" HF Voice Coil1.4" Directivity (HxV)100 x 80° (+15°/- 65°) HF TypeNeodymium compression driver HornVertical asymmetric Crossover Frequency1900 Hz LF2x8” LF Voice Coil2" LF TypeNeodymium Amplifier Amp TechnologyDigipro® G3 Amp ClassClass-D Peak Power800 W RMS Power400 W User InterfaceOLED display + rotative knob w/switch Self-rotating displayYes PositioningEPD (Element Position Detection) Display MirroringYes Processor ControllerDSP 56 bit AD/DA Converter24bit/48kHz System PresetsFactory presets + User defined LimiterDual Active Peak, RMS, Thermal Input Signal Input1 x Combo IN (XLR + Jack 6.3mm) Signal Out1 x XLR link OUT USB connectorYes - mini USB Mechanics HousingPolypropylene PP reinforced GrilleFULL /Invisible screws FlyableYes Handles1x on top / 1x on bottom Pole MountYes Width228 mm (8.98 in) Height646 mm (25.43 in) Depth315 mm (12.40 in) Weight12.8Kg (28.22 lbs.)