American DJ Dotz Par 100
High output slim low profile Par fixture with one TRI (3-IN-1) RGB COB LED
Visit the American DJ store.
SKU: DJK20047 • EAN: 819730014238
American DJ Dotz Par 100 Special Offers When bought with this product
American DJ Dotz Par 100 Product Description
The ADJ Dotz Par 100 uses advanced COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGB shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the Dotz Par 100 is a TRI 100W (3-In-1).
American DJ Dotz Par 100 Bundles
Technical Specs
The Dotz Par 100 produces wash of 80-degrees (25-degrees if you put on the supplied lens kit). It has 4 DMX Channel modes for programming flexibility, 32 built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, DMX and power power daisy-chaining , and a 4-button LCD DMX display. Dotz Par may run in its stand-alone mode from built-in programs, sound actively, from a DMX controller, or from the ADJ Par RF wireless remote control.
High output slim low profile Par fixture with one TRI (3-IN-1) RGB COB LED
COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color
Use as Wash/par or Pixel Mapped for a stunning visual effect
5x Operational modes: Auto Run, Sound Active, Color Macro, Dimmer, and DMX Controlled Mode
4 DMX channel modes: 3, 4, 5 or 9 channel
Intelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss
Built-In preset colors and programs
Flicker Free operation (No flickering on camera)
32 built-in Color Macros
LED pulse and strobe effect
Electronic Dimming: 0 100%
5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)
Beam angle: 80-degrees (25-degrees with supplied lens kit)
3-pin XLR chassis mount connectors for DMX linking
IEC AC IN/OUT to daisy chain power (up to 9 Dotz Par 100’s @ 110V and 19 Dotz Par 100’s @ 230V)
Power Draw: 115W total (All LEDs @ Full On)
4-button LCD DMX display on rear panel
Compatible with ADJ Par RF wireless remote control (sold separately)
Single yoke allows fixture to be mounted
Light Source: 1x 100-Watt COB TRI LED (RGB: 3-IN-1, rated at approximately 50,000 hrs)
Auto sensing power supply: AC 100V/60Hz 240V/50Hz
Dimensions (LxWxH): 201 x 120 x 201 mm (Without Bracket)
255 x 130 x 284 mm (With Bracket)
Weight: 3,1 kg
American DJ Dotz Par 100 Videos
There are no videos for this product.
