Alto MixPack Portable 3-Way Powered PA System 600W
Visit the Alto Professional store.
Discontinued
This product has now been discontinued
Earn
1,278
djkit® loyalty points
Seen a better price?
SKU: DJK07830
Special Offers When bought with this product
Product Description
The MIXPACK is a part of the MIXPACK line of portable powered PA systems. A 12" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 600 watts of continuous pure Class AB power.
MIXPACK doesn't stop with professional amplification and speakers. A 10-channel mixer is included so you can connect everything from musical instruments to microphones to an iPod. Maybe your band is gigging or you are a live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power, Regardless of where the performance takes you, MIXPACK is easy to set up with all the right connections. Stands are included so you can get the sound where it needs to go.
Once all your gear is connected to MIXPACK, you can go to work on fine tuning for the venue with MIXPACK's built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance.
When you need to get in and out in a hurry with high-power, clarity and flexibility, MIXPACK is the portable PA choice of audio professionals. Also available are the 1000W MIXPACK Pro and 350W MIXPACK Express.
Once all your gear is connected to MIXPACK, you can go to work on fine tuning for the venue with MIXPACK's built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance.
When you need to get in and out in a hurry with high-power, clarity and flexibility, MIXPACK is the portable PA choice of audio professionals. Also available are the 1000W MIXPACK Pro and 350W MIXPACK Express.
Bundles
All
All
Technical Specs
Technical Specs
3-Way Powered System Bi-Amp plus passive crossover into Satellite
Low Output Power 150W RMS Class AB
MID-HIGH-Output Power 75W+75W RMS Class AB
Peak Power Ratling 600W Peak
Maximum SPL @ 1m 116.5dB Continuous - 119.5dB Peak (calculated)
Frequency Response 55Hz-20KHz @ -10dB
Impedance Low-Mid/High Low 8ohm - Mid/high 8ohm
Crossover Frequencies Active 125Hz at 12dB/Oct - Passive 3000Hz at 12dB/Oct with Electronic
Dynamic Protections
Amplifier Protections Low-Mid/High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB/Oct - Limiter/Compressor
Low Frequency Device 12"/318mm - 2" Voice Coil
Mid Frequency Device 4×6.5"/165mm - 1.5" Voice Coil
High Frequency Device 2×1"Compression Driver - 1" Voice Coil
Hom Coverage H° × V° 80°H × 80°V
Plastic Reinforced Cabinet Polypropilene
MIXER Section
Microphone Input Electronically balanced discrete input configuration
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Gain 35dB
SNR(Signal to Noise Ratio) ＞94dB
Line input Electronically balanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Gain 15dB
Stereo input / Output
Line input Unbalanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Impedances
Microphone Input 1.4k ohm
Channel insert retum 2.5k ohm
All other lnputs 10k ohm or greater
Tape out 1k ohm
All other outputs 120 ohm
Equalization
Hi shelving ±[email protected]
Mid bell ±[email protected]
Low shelving ±[email protected]
DSP section
A/D and D/A converters 24bit
DSP resolution 24bit
Type of effects Reverbs, Stereo, Delay, Chorus, Rev+Delay and Rev+Chorus combinatons Presets 16
Controls & Monitoring
16-position preset selector
Cllp Led
Mute Switch with LED indicator
Main Mix Section
Noise(Bus noise) Fader 0 dB channels muted -85dB (ref:+4dBu)
Fader 0 dB all input channels assigned and set to Unity gain:-81dBr(ref:+4dBu)
Max output 27dBu balanced
Controls 22dBu balanced 1/4" jacks
AUX Sends max out 22dBu
Power Supply AC-220/240V or AC-100/120 Volt, with Switching Power Mode.
3-Way Powered System Bi-Amp plus passive crossover into Satellite
Low Output Power 150W RMS Class AB
MID-HIGH-Output Power 75W+75W RMS Class AB
Peak Power Ratling 600W Peak
Maximum SPL @ 1m 116.5dB Continuous - 119.5dB Peak (calculated)
Frequency Response 55Hz-20KHz @ -10dB
Impedance Low-Mid/High Low 8ohm - Mid/high 8ohm
Crossover Frequencies Active 125Hz at 12dB/Oct - Passive 3000Hz at 12dB/Oct with Electronic
Dynamic Protections
Amplifier Protections Low-Mid/High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB/Oct - Limiter/Compressor
Low Frequency Device 12"/318mm - 2" Voice Coil
Mid Frequency Device 4×6.5"/165mm - 1.5" Voice Coil
High Frequency Device 2×1"Compression Driver - 1" Voice Coil
Hom Coverage H° × V° 80°H × 80°V
Plastic Reinforced Cabinet Polypropilene
MIXER Section
Microphone Input Electronically balanced discrete input configuration
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Gain 35dB
SNR(Signal to Noise Ratio) ＞94dB
Line input Electronically balanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Gain 15dB
Stereo input / Output
Line input Unbalanced
Frequency Response 10Hz to 55KHz ＋/－3dB
Distortion(THD&N) 0.04% at +4dBu 1KHz
Impedances
Microphone Input 1.4k ohm
Channel insert retum 2.5k ohm
All other lnputs 10k ohm or greater
Tape out 1k ohm
All other outputs 120 ohm
Equalization
Hi shelving ±[email protected]
Mid bell ±[email protected]
Low shelving ±[email protected]
DSP section
A/D and D/A converters 24bit
DSP resolution 24bit
Type of effects Reverbs, Stereo, Delay, Chorus, Rev+Delay and Rev+Chorus combinatons Presets 16
Controls & Monitoring
16-position preset selector
Cllp Led
Mute Switch with LED indicator
Main Mix Section
Noise(Bus noise) Fader 0 dB channels muted -85dB (ref:+4dBu)
Fader 0 dB all input channels assigned and set to Unity gain:-81dBr(ref:+4dBu)
Max output 27dBu balanced
Controls 22dBu balanced 1/4" jacks
AUX Sends max out 22dBu
Power Supply AC-220/240V or AC-100/120 Volt, with Switching Power Mode.
Videos
Seen a video for Alto MixPack Portable 3-Way Powered PA System 600W?
Send us the URL and published videos will receive loyalty points!
There are no videos for this product.
Reviews
Do you own the Alto MixPack Portable 3-Way Powered PA System 600W? Why not write a review based on your experience with it.
Questions
Considering purchasing the Alto MixPack Portable 3-Way Powered PA System 600W? Have questions?
Ask people who've recently bought one.
