Akai RPM800

RPM800 offers pure and accurate frequency response from 38Hz to 30kHz. The 120-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification—80 Watts to the woofer, 40 Watts to the tweeter—meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Meticulous Control

Dedicated proximity and EQ-tailoring controls give you the ability to fine-tune the speaker in diverse mixing environments. RPM800 also features HF Trim, MF Boost, and LF Cutoff controls, which allow you to find the right balance in any environment. The included monitor isolation pad dramatically decreases structure-borne resonances, and the integrated radio frequency protection preserves signal purity. RPM800 includes XLR, balanced ¼-inch TRS, and RCA inputs.
Solid to the Core

RPM800’s cabinet is painstakingly reinforced to minimize flex, combating unwanted coloration while blocking anomalies and sound artifacts from polluting your mix. The no-compromise build quality is reflected even in components you’ll never see such as the recess-mounted amp, on/off transient protection, and 14-gauge wiring to transducers. RPM800 also features a built-in output current limiter, over-temperature limiter, and subsonic filter—a full array of top-notch components that make all the difference in the purity that you hear.

Pure and accurate frequency response from 38Hz to 30kHz
120-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
80-Watt 8-inch (203.2mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs

Dimensions (each): 17.1" x 14.2" x 11.3"
Weight (each): 30.1 lbs
Power configuration: Bi-amplified
LF Driver size: 8 inch (203.2mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 80-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 38 Hz to 30 khz